ENHANCED VISION DaVinci HD OCR Manuale utente
User Manual
Congratulations on your purchase of the DaVinci HD Magnifier with
OCR. Enhanced Vision products are designed to give you the highest
quality and convenience available. The DaVinci product can enable
people with low vision to read, write, see objects at any distance and
have text read to them.
The unique design of this product provides the ultimate in flexibility
and offers a large range of magnification with multiple viewing
options that make reading easier than ever. The DaVinci is a fully
integrated solution, offering the advantage of a built-in HD LCD
screen and OCR. Prior to using this system, please carefully read
and follow the instructions provided within this booklet. A thorough
understanding of the functionality will allow you to fully benefit from
the flexibility and great features of this device.
If you have any questions, please contact the eye care professional
or the supplier from whom you have acquired the unit.
FCC ComplianCe notiCe
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Unauthorized changes or modication to this system can void the user’s
authority to operate this equipment.
If your Low Vision device has an option to connect to a TV, it must be used
with shielded interface cables in order to meet FCC emissions limits for
Class B digital devices. It is the responsibility of the user to use the shielded
interface cables supplied with the equipment.
FCC COMPLIANCE NOTICE
table oFContents
TABLE OF CONTENTS
Important Safety Precautions ................................................................... 5 - 8
DaVinci Setup .............................................................................................. 9
DaVinci Package Contents .......................................................................... 10 - 11
Using DaVinci ................................................................................................... 12 - 30
Distance, Self, & Desktop Modes ................................................................ 12-15
Button Definition ............................................................................................ 16
Adjusting Magnification ............................................................................... 17
Changing the Viewing Mode ........................................................................ 18-20
Adjusting Brightness & White Balance ............................................... 21
Using & Adjusting Markers ......................................................................... 22-23
Volume Adjustment & VGA Toggle ........................................................ 24
OCR/ Text-To-Speech Mode ................................................................... 25-27
Saving, Recalling, & Deleting Images ........................................... 28-29
Screen Saver .................................................................................................. 30
Language Settings .......................................................................................... 31-32
Troubleshooting ............................................................................................... 33
DaVinci Specifications ................................................................................... 34-35
Warranty Information....................................................................................... 36
5
table oFContents important saFety preCautions
For your safety and to obtain the most benefit from the DaVinci, please
read these safety precautions very carefully.
The DaVinci is designed to enlarge and enhance images and read print
aloud in order to improve the quality of life for people who are visually
impaired. The extent to which this product can improve the ability to
see images depends on a person’s individual condition and level of
visual impairment.
The DaVinci is not designed to restore vision, correct eye conditions or
halt degenerative vision loss. An eye care professional can determine
the usefulness and suitability of the DaVinci for a patient’s individual
condition. Please follow these safety precautions:
• Use the DaVinci on a stable, level surface such as a solid desk or table,
according to its intended design specifications.
• Avoid placing the DaVinci on an unstable table, cart or stand. It may
fall causing serious damage to the unit or bodily injury to the user.
• Use the DaVinci indoors only – it should NOT be exposed to extreme
or rapid changes in temperature or humidity. Do not place the
DaVinci near a radiator, heater or areas exposed to long hours of
direct sunlight.
• Always place the power cord away from traffic areas to avoid damage
of power supply.
• Prevent the risk of electrical shock by NOT attempting to disassemble
the unit. Please refer all service to an authorized repair facility.
IMPORTANT SAFETY PRECAUTIONS
6important saFety preCautions
To Move the DaVinci to Another Location
• Use caution if you are repositioning the DaVinci a short
distance across a desk or table. Make sure you do not pull on
any power cords or connector cables.
Caring for the DaVinci
• Always turn the power OFF on the DaVinci when the system
is not in use.
• Always turn the power OFF before cleaning the DaVinci.
• Clean the DaVinci with a soft dry cloth or an electrostatic
dusting wipe. DO NOT use liquid cleaners on its plastic surfaces.
• Clean the camera lens and Close-up Lens as needed with the lens
cloth provided within the DaVinci’s packaging (See figure 1).
Figure 1
7
important saFety preCautions
• Follow all warnings, cautions, and instructions marked on
the product.
• The attached power cord is a disconnect device for electrical
equipment. The socket-outlet should be installed near the
equipment and be easily accessible.
• This product is equipped with a 3-wire grounding type plug as a
safety feature. This plug has a third (grounding) pin and can only
be plugged into a grounding-type power outlet. If necessary,
contact an electrician to replace your power outlet with a
grounding-type power outlet.
• Do not use the DaVinci in, near or around water. The DaVinci
is not designed to offer protection against contact with liquids
of any kind.
• Do not use the DaVinci near flammable liquids.
• At least once per week, clean the DaVinci with a soft dry
cloth or an electrostatic dusting wipe. No additional methods of
sterilization or cleaning are recommended nor required.
important saFety preCautions
8important saFety preCautions
• This product contains moving
parts. Please use caution when
moving the adjustable slide arm or
when transporting the DaVinci to
avoid possible injury to hands and
fingers.
• To avoid personal injury or damage
to the DaVinci, do not make any
other type of connections to the
input jacks.
Susceptibility to Interference
There may be temporary degradation of the image when the DaVinci is
subjected to a strong radio frequency field, electro-static discharge or
transient electrical noise. An electro-static discharge (caused by static
electricity) may cause the screen to go blank. If this happens, disconnect
the AC power from the electrical outlet, wait 30 seconds, and connect the
AC power again.
Compliance Warnings
• Electromagnetic compatibility: The use of accessories and cables other
than those specified by Enhanced Vision may result in increased
emissions or decreased immunity of the DaVinci.
• Placement of equipment: The DaVinci should not be used adjacent to or
stacked with other equipment.
9
important saFety preCautions DaVinCi setup
1. Unpacking and transporting the DaVinci.
During unpacking and transporting, be sure to lift
the DaVinci by the built-in carrying handle. Do not
attempt to lift or carry the LCD by the base or the
camera arm. (See Figure 1)
2. Setup the DaVinci. Place the DaVinci on a flat,
level surface such as a table or desk.
3. Connect the AC power. Connect the attached
power cord to the power supply. (See Figure 2)
Connect the power cord to an available electrical
outlet. (See Figure 3) To offer additional protection
during an electrical storm, a surge protector may
also be used and is recommended. Connect the
other end of the power supply to the DaVinci
where it is labeled “+19VDC”
The DaVinci will automatically power on
the first time it is connected to an available
electrical outlet.
Pressing the Power button on the front, right side,
of the DaVinci (See Figure 4) for less than 5
seconds will put the device in Standby. Pressing
the Power button again will wake the DaVinci up
from Standby.
To turn the DaVinci off, press and hold the
Power Button for more than 5 seconds or until “EV
DaVinci” appears on the screen.
Figure 1
Figure 2
Figure 3
DAVINCI SETUP
Figure 4
10 DaVinCi paCkage Contents
DaVinci is comprised of the following items and features
1. 24” LCD Screen: displays high quality image
2. HD Camera: rotates 340 degrees to capture and enlarge the image
3. Carrying Handle: used for lifting the DaVinci
4.
Close-up Lens
: used for up close high magnification
5. Arm: rotating arm that holds the camera
6. Lock: used to lock arm from sliding horizontally
7. LED Lamp
Accessories included:
8. 3.5mm jack for Headphones
9. Control Console: allows the user to control the DaVinci functions
*Must be plugged in to use and have access to the menu items for
OCR/Text-To-Speech.
10. Power Supply
11. Power Cable
12. Lens Cloth: permits cleaning of the LCD display and lenses.
Accessories NOT included:
13. X-Y Table: X-Y table and Mini X-Y table are available for your DaVinci,
place underneath your DaVinci camera and make reading even easier!
DAVINCI PACKAGE CONTENTS
Indice
Altri manuali ENHANCED VISION Telecamera per documenti
