10
B. Network
Here, if you want, you can set a certain IP among private inner IP band.
ⓐDHCP: Through this function, you can configure DHCP(Dynamic Host
Configuration Protocol) to minimize any possible network collisions. However, it
is not imperative to adjust the initial value.
ⓐ-1 IP: „192.168.3.1‟ is given as the initial IP(Host). It is not imperative to
change. However, please bear in mind that if the numbers of the first three
section of your private inner IP band is the same with the given IP like
„192.168.3.XX‟, it is advisable to change the first „192.168.3‟ part like
„192.168.4.1‟. Otherwise, there might be a network collision.
ⓐ-2 SubNet: SubNet defines the number of access to WifiAn and also how
to allocate IP to WifiAn connected devices. It is not imperative to change.
Initial value is „255.255.255.0‟ which refers that WifiAn connected devices is
automatically set to get IP with new numbers at the last section up to 254
devices. (eg. ‟192.168.3.2‟, „192.168.3.3‟….‟192.168.3.255‟)
[When WifiAn IP is „192.168.3.1‟ (Initial value)]
