ennoLogic eD560L Manuale utente
eD560L Laser Distance Meter
User Manual
Laser Distance Meter ennoLogic eD560L
Made in China
User Manual Version 1.2. Revised 11/17/2017.
2017 ennoLogic™. All rights reserved.
http://ennologic.com
Table of Contents
1. Overview ................................................................................................ 1
1.1 Important Notes, Safety Considerations and.............................. 1
Disclaimer – Please Read .................................................................... 1
1.2 LCD Display ................................................................................... 3
1.3 Keypad ............................................................................................ 4
1.4 Battery Installation or Replacement............................................. 4
1.5 How to Use Your Laser Distance Meter ...................................... 5
Power On/Off.................................................................................. 5
Canceling an Operation / Clearing Display ................................ 5
Switching Measurement Units...................................................... 5
Setting the Reference Edge of the Instrument for your
Measurements ................................................................................ 6
Backlight .......................................................................................... 7
Setting of Power-On Defaults and Optional Modes................... 7
Measurement Modes ........................................................................... 8
Distance Measurement .................................................................. 8
Area Measurement ....................................................................... 11
Volume Measurement ................................................................. 12
Indirect Measurements ................................................................ 13
Setting-Out Measurements ......................................................... 19
Reviewing Historical Data .......................................................... 20
SPECIFICATIONS ................................................................................... 22
Technical Specifications .................................................................... 22
Failure Causes and Solutions ........................................................... 23
Measurement Conditions ................................................................. 24
Maintenance ....................................................................................... 24
1
1. Overview
Thank you for purchasing the ennoLogic eD560L laser distance
meter. This meter is a precision instrument designed to deliver
very accurate distance, area and volume measurements. It can
also measure height using the Pythagorean Theorem.
The eD560L laser distance meter is designed to meet the needs of
professionals engaged in surveying, construction, traffic, real
estate, urban planning, fire fighting, farm and garden. You will
also find it incredibly useful for many home improvement
projects.
1.1 Important Notes, Safety Considerations and
Disclaimer – Please ead
Please read these safety instructions and this user
manual carefully before using this instrument for the first time!
This meter is equipped with a single Class II infrared laser. Use
extreme caution when the laser pointer is on. Do not stare into the
beam. Never point the laser beam at anyone’s eyes, it can cause
permanent damage to the eyes. Do not reflect the laser beam off a
reflective surface and into someone’s eyes. Do not allow children
to use the instrument as a toy.
2
Do not use the instrument in a flammable or explosive
environment. Do not use this meter in areas where it is prohibited
e.g. near airports and hospitals, or where it would be in violation
of the law.
To ensure proper operation avoid using this instrument in areas
with strong electromagnetic interference.
Do not open the instrument other than for the purpose of
replacing batteries.
Store the instrument at a cool and dry location and do not expose
it to high temperatures and humidity. Remove the batteries if the
meter will be out of use for an extended period. Do not clean the
instrument with corrosive or caustic cleaners. Treat the laser and
focusing lens as you would the optical lens of a camera.
Location of Laser Warning Label
3
1.2 LCD Display
1 - Length measurement indicator
2 - Battery indicator
3 - Stored data indicator
4 - Signal strength indicator
5 - Secondary display area
6 - Main display area
7 - Measurement unit
8 - Area/Volume measurement mode
9 - Setting-out measurement mode
10 – Indirect measurement mode
11 - Measurement reference edge indicator
12 - Laser emission indicator
4
1.3 Keypad
1 - Power-on/Measurement key
2 - Volume/Area key
3 – Indirect Measurement (Pythagorean
Theorem)
4 - Plus (+) key
5 - Historical data key
6 - Minus (-) key
7 - Reference key / Backlight key
8 - Cancel/Power-off key
9 - Units key
1.4 Battery Installation or eplacement
Open the battery cover on the back of the instrument and install
two 1.5V AAA batteries according to polarity indicators (alkaline
batteries are recommended).
5
1.5 How to Use Your Laser Distance Meter
Power On/Off
Press the MEAS key to turn on the instrument and laser.
Hold down the CLR key to turn the instrument off. It will
power off automatically after 3 minutes without use.
Canceling an Operation / Clearing Display
Press the CLR key to cancel the last operation or to clear
the display.
Switching Measurement Units
Press the Unit key to cycle through the measurement units
(meters, feet, and inches).
Setting Distance Area Volume
Meters 0.000 m 0.000 m2 0.000 m3
Feet 0.00 ft 0.00 ft2 0.00 ft3
Inches 0.0 in 0.00 ft2 0.00 ft3
6
Setting the Reference Edge of the Instrument for your
Measurements
The default setting for the reference edge of the instrument is its
back edge. This means that any distance measurements you take
will be referenced to the back edge of the meter. You can choose
to use the front edge of the meter as the reference edge instead.
To do so, simply press the key, and the next measurement
will use the front edge as the measurement reference edge.
Pressing it again will change it back to the back edge. Changing of
the measurement reference edge will be confirmed by a beep.
Each time you turn the meter on, the measurement reference edge
will be set to the default value (back edge).
7
Backlight
Hold down the key to turn the backlight on or off.
Setting of Power-On Defaults and Optional Modes
To change the power-on defaults and other optional modes turn
the meter on first, then hold down the key until the reference
edge/laser icon is displayed.
Press the key to cycle through the parameters that can be
changed (see table below).
To change the setting for a parameter, press the and
keys.
After changing a parameter, keep pressing the key until
the unit returns to normal measurement mode. This will save the
new settings.
Reference edge/laser icon: Use the “+” key to select whether the laser
will turn on automatically at power-on.
Area/volume and triangle icons: Use the “+” key to select whether
the laser will turn on automatically when entering area/volume or
triangle measurement mode.
Indice
