Unfortunately the only weak point is that this connector does not have any indications or
markings to identify the position of each cable, so it is easy to get confused or go wrong. You
should take extreme caution to insure you install the connectors in a consistent manner
(positive and negative leads match up to each other).
Not respecting this and careless installation could damage every electronic component even
causing explosion. If you are not confident please seek professional help and guidance.
Do you think this connector is a little bit too big and heavy? Don’t forget to compare to your
previous power system, with the Swave ESC, which is already much smaller and saves space
and less in weight!
To know more about this connector and where to buy it, simply do a google search. You will
find dozens of links and shops selling them (search word: ‘MR-30 AMASS connector’).
Enjoy your racing!
As an electronic system solution provider, Ensotech always keeps searching for the best.
Disclaimer
The experiment, research and study in this article was done by a professional, it is not a toy
and must be handled by adults. Understanding of R/C electronics and known to do a proper
soldering is critical. You must realize an un-proper work may cause explosion, personal
injured, damage of equipment even losses of your facilities. If you are not certain never try to
do it yourself, always consult and handle by professional. Wrong priority connection do not
covered by Ensotech warranty, warranty terms and conditions was listed inside the manual.
This article is not encouraging customer to follow, purpose of sharing experience only.
Trademarks, images, copyrights, brand names, product in this article is the property of their
respective owners. The depiction of some products and images are for demonstration
purposes only.
Ensotech Limited disclaim any liability, loss and damage in the connection with the use of
information directly or in-directly in this article.
