Read and understand all warnings, cautions, and assembly, installation and use instructions prior to assembling,
installing or using this product. Failure to follow all warnings, cautions and instructions may result in serious injury.
The warnings, cautions, and instructions in this manual cannot cover all possible conditions or situations that could
occur. Exercise common sense and caution when using this truck rack. Always be aware of the environment and
ensure that the rack is used in a safe and responsible manner.
NEVER allow other persons to assemble, install or use this product until they have read this manual and have
developed a thorough understanding of how the product works.
NEVER attempt to modify this product or subject it to an installation or use for which it was not designed. Doing so
may result in damage and/or serious injury.
SAVE THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE
ASSEMBLY, INSTALLATION, USE AND PERSONAL SAFETY PRECAUTIONS
•Park your truck on a level, hard surface well away from hazards. Place transmission in park and set the parking
brake with engine off. If working indoors, ensure adequate clearance for installation and exit prior to starting.
•ALWAYS follow all federal and state department of transportation regulations governing installation and use.
•Verify that installation surface has no hidden wires before installing.
•NEVER allow the rack to come into contact with an electrical source. The rack is not insulated and contact will
cause electrical shock.
•ALWAYS wear appropriate safety gear such as ANSI-approved safety goggles and heavy-duty work gloves when
assembling, installing, loading, unloading or removing/storing the rack.
•NEVER attempt to assemble, install, load or unload the rack while you are tired or under the influence of drugs or
alcohol.
•Keep children and bystanders away from the work area while assembling, installing, loading/unloading the rack.
•ALWAYS thoroughly inspect your rack for loose parts and/or signs of damage prior to each use, installation or
removal.
•NEVER use your rack until any loose parts have been properly secured or damaged parts have been properly
replaced.
•Maximum weight capacity rating applies only to an evenly distributed and properly secured load on a properly
installed rack.
•NEVER exceed the evenly distributed maximum weight capacity of this rack.
•NEVER exceed the rated maximum weight capacity of the truck on which this rack is installed. Refer to the truck’s
Gross Vehicle Weight Rating.
•Carrying any load can be hazardous. All loads must be tied down securely to the rack to prevent them from
changing position or coming loose as a result of wind, road hazards or vehicle movement.
•Top heavy loads increase the chance of rollover. High loads must be transported with GREAT CAUTION to avoid
striking objects with low clearance or vehicle tipping during turns, sudden maneuvers or high winds.
•Be aware of dynamic loading! Sudden load movement may briefly create excess load causing product failure.
Technical Specifications
