Entone Amulet 4 Manuale utente
Amulet 4
mediA RecoRdeR
Quick Start Guide
QUICK START GUIDEAMULET MEDIA RECORDER
1
COPYRIGHT
©2013 Entone, Inc. All rights reserved. This document contains proprietary information protected by
copyright. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in
any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the
prior written consent of Entone, Inc., 20863 Stevens Creek Blvd, Suite 300, Cupertino, CA 95014, U.S.A.
DISCLAIMER
IF THIS PRODUCT DIRECTS YOU TO COPY MATERIALS, YOU MUST HAVE PERMISSION FROM THE COPY-
RIGHT OWNER OF THE MATERIALS TO AVOID VIOLATING THE LAW WHICH COULD RESULT IN DAMAGES
OR OTHER REMEDIES.
TRADEMARKS
Entone and the tagline “Connecting the Home”are trademarks of Entone, Inc. All other trademarks or
registered trademarks belong to their respective owners.
This item incorporates copy protection technology that is protected by U.S. patents and other intellec-
tual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
CHANGES
The material in this document is for information only and is subject to change without notice. While rea-
sonable eorts have been made in the preparation of this document to assure its accuracy, Entone, Inc.
assumes no liability resulting from the use of the information contained herein. Entone, Inc. reserves the
right to make changes in the product design without reservation and without notication to its users.
P/N: 99-708004-13 - V3.0
Table of Contents
OVERVIEW
2 Safety Instructions
4 What’s Included
6 Front Panel
7 Rear Panel
CONNECTING VIDEO
8 High-Denition TVs
9 Standard-Denition TVs
CONNECTING AUDIO
11 Stereo
12 Surround Sound
CONNECTING NETWORK
13 Ethernet or MoCA
POWERING UP
16 Setting up Remote Control
17 Connecting to Power Source
18 Declaration of Conformity
QUICK START GUIDE
QUICK START GUIDE
AMULET MEDIA RECORDER
AMULET MEDIA RECORDER
32
Important Safety Instructions
• WARNING: To reduce the risk of re or electric shock, do not expose this ap-
paratus to rain or moisture.
• The apparatus shall not be exposed to dripping or splashing and that no ob-
jects lled with liquids, such as vases, shall be placed on the apparatus.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the manu-
facturer’s instructions.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or the
third prongs are provided for your safety. If the provided plug does not t into
your outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specied by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long peri-
ods of time.
• Refer all servicing to qualied service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the ap-
paratus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
• To reduce the risk of electric shock, DO NOT remove cover or back panel. No
user serviceable parts inside. Refer servicing to qualied personnel.
Important Safety Instructions (Continued)
• To help prevent electric shock, plug the power cable into properly grounded
sources. Use only properly grounded extension cords and adaptors, if they are
needed.
• The AC main plug is used as the disconnect device, the disconnect device shall
remain readily operable.
• Make sure nothing is lying on any of the cables.
• Be sure the cables are located where they will not be stepped on or tripped
over.
• Do not spill food or liquids onto the unit.
• Do not push any objects into the free slots. Doing so will damage the unit, can
cause re or electrical shock, and can short out interior components.
• Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including ampliers) that produce heat.
• Do not block cooling vents.
• Do not place the equipment in a closed-in wall unit.
• When you disconnect a cable, pull on its connector or on its strain relief loop,
not on the cable itself. Some cables have a connector with locking tabs; if
you are disconnecting this type of cable, press in on the locking tabs before
disconnecting the cables.
• When you connect a cable, make sure both connectors are correctly oriented
and aligned before connecting to avoid bending connector pins.
• For PLUGGABLE EQUIPMENT, the socket-outlet should be installed near the
equipment for easy access.
• Changes or modications not expressly approved by the party responsible
could void the user’s authority to operate this device.
QUICK START GUIDE
QUICK START GUIDE
AMULET MEDIA RECORDER
AMULET MEDIA RECORDER
54
What’s Included
IR Remote Control*
2 Batteries for
Remote Control
Amulet Quick Start Guide Remote Control Guide*
Amulet Media Recorder
Ethernet Cable (Optional)
HDMI Cable (Optional)
Additional items that may be required (not included):
• Ethernet Cable
• HDMI Cable
• RF Coaxial Cable
• Digital Audio Cable
• Network Router
• MoCA Bridge
AC Power Adapter*
DIN-to-RCAx6 Cable
*The Remote Control may vary and is dependent on your service provider. *The AC Power Adapter may vary and is dependent on your service provider.
QUICK START GUIDE
QUICK START GUIDE
AMULET MEDIA RECORDER
AMULET MEDIA RECORDER
76
Amulet — Front Panel
Name Description
1
Power Button Solid blue indicates the unit is on
Solid red indicates the unit is in standby mode
Flashing blue indicates the unit is starting up
Press button once to put unit in standby mode, press
again to resume
To restart the device, press and hold button for 5
seconds
2
Reset (At bottom) Reset the device factory settings with a thin metal
probe
3
Link Indicator Blue dot indicates that Ethernet or Wi-Fi network con-
nection is active
4
Clock Clock displays current time set by your service pro-
vider.
5
HD Indicator Blue dot indicates current program is playing in HD
(720p or higher) resolution
6
Record Indicator Blue dot indicates a TV program is currently recording
Amulet — Rear Panel
Name Description
1
TV OUT Coaxial Connection to TV for loop-through
2
CABLE IN Port for connecting to cable or antenna source
or MoCA network
3
A/V OUT 9-Pin DIN conector for connecting to video output us-
ing DIN-to-RCA cable
4
HDMI Digital video and audio port for connecting to a high-
denition TV (HDTV)
5
Digital Audio S/PDIF digital optical audio TOSLINK output
6
Ethernet Plug for wired network connection
7
USB To connect USB devices such as USB ash drive and
external USB hard drive.
(max 500mA load)-
8
Power DC power jack (12V/1.5A)
Availability of certain features is dependent on your service provider. Availability of certain features is dependent on your service provider.
7
46
125
3
34
1
25
6
8
QUICK START GUIDE
QUICK START GUIDE
AMULET MEDIA RECORDER
AMULET MEDIA RECORDER
98
STEP 1: CONNECTING VIDEO
Amulet provides two video options for connecting to your TV:
HDMI and Composite Video.
Select a video option then proceed to Step 2.
Make sure your TV is turned on and the correct video input is
selected.
Option 1: HDMI (Recommended)
If your TV has an HDMI connection,
use an HDMI cable (may not be
included) and connect Amulet to the
HDMI IN port on your TV. This connection provides both video
and audio so you do not need a separate audio connection.
Proceed to“Step 3: Connecting Network” on
page 13.
Delivers the best video & audio
quality via a single cable
S-VIDEO
Cable is optional and
may not be included
Option 2: Component Video
Use the Jack-to-RCAx6 cable pro-
vided and connect the component
cable to the COMPONENT IN port on
your TV. Then proceed to “Step 2: Connecting Audio” to con-
nect the red/white cables.
If you have already selected HDMI as your video connection,
then do not use this cable.
Component Video
Delivers excellent picture
quality
Cable included
S-VIDEO
QUICK START GUIDE
QUICK START GUIDE
AMULET MEDIA RECORDER
AMULET MEDIA RECORDER
1110
Option 3: Composite Video
Use the Jack-to-RCA cable provided
and connect the yellow cable to the
yellow VIDEO IN port on your TV.
Then proceed to “Step 2: Connecting Audio” to connect the
red/white cables.
If you have already selected HDMI or Component Video as
your video connection, then do not use this cable.
Composite Video
Delivers good picture quality
Cable included
S-VIDEO
STEP 2: CONNECTING AUDIO
Amulet has two audio options: Stereo or Surround Sound.
Select an audio option and proceed accordingly.
NOTE: If you have already selected HDMI as your video con-
nection, then skip this audio section and proceed to “Step 3:
Connecting Network” on page 13.
Option 1: Stereo
Use the Jack-toRCA cable provided and connect the 3.5mm
jack to the Amulet A/V Out port and the red and white cables
to the AUDIO IN port on your TV.
S-VIDEO
Cable included
QUICK START GUIDE
QUICK START GUIDE
AMULET MEDIA RECORDER
AMULET MEDIA RECORDER
1312
Cable not included
Option 2: Surround Sound
If your TV is connected to an A/V Receiver that supports Dolby
Digital 5.1 Surround Sound, use a digital audio cable (sold
separately) to connect Amulet to the OPTICAL AUDIO IN port
on your A/V Receiver.
STEP 3: CONNECTING NETWORK
Select from one of the following networking options.
Option 1
Connect an Ethernet cable (sold separately) from Amulet to a
cable/DSL modem or Network Router.
Router not included
Cable is optional and
may not be included
QUICK START GUIDE
QUICK START GUIDE
AMULET MEDIA RECORDER
AMULET MEDIA RECORDER
1514
Cable not included
Option 2
Connect your Amulet to a MoCA Network.
NOTE: The Cable TV / Antenna signals from the ANT IN port is
loop-through to TV Out port.
NOTE: Contact your service provider for more details and
instructions about the MoCA network conguration.
The signals from the ANT IN port is loop-through to TV Out
port. If you selected MoCA for networking, you can use a
coaxial cable (not provided) and connect the cable to the
ANTENNA IN port on your TV. Your TV will receive the video
signals from the coaxial outlet.
Cable not included
S-VIDEO
ANT IN
QUICK START GUIDE
QUICK START GUIDE
AMULET MEDIA RECORDER
AMULET MEDIA RECORDER
1716
STEP 4: POWERING UP
Setting Up Remote Control
1. Open the battery cover by pressing down on the battery
cover latch and sliding it o.
2. Insert the batteries, matching the “+” and “-”marks on the
batteries with the interior of the remote control.
3. Snap on the battery cover to close.
NOTE: Refer to the Remote Control Guide for more details
about other remote control features.
Connecting to Power Source
1. Connect the power cord to the POWER port on the back of
the Amulet.
2. Plug the AC power adapter to a power outlet.
3. Follow the on-screen instructions.
NOTE: Make sure your TV is turned on and the correct video
input is selected.
Indice
Altri manuali Entone Lettore multimediale
Entone
Entone Kamai 510 Series Manuale utente
Entone
Entone Kamai 500 Series Manuale utente
Entone
Entone Kamai 500 Series Manuale utente
Entone
Entone Kamai 510 Series Manuale utente
Entone
Entone Kamai 400 Series Manuale utente
Entone
Entone Kamai 410 Manuale utente
Entone
Entone Kamai 500 Series Manuale utente
Entone
Entone Kamai 500 Series Manuale utente
