Entone Aria 5 Manuale utente
AriA 5
Hybrid dTA
Quick Start Guide
®
QUICK START GUIDEARIA HYBRID DTA
1
COPYRIGHT
©2014 Entone, Inc. All rights reserved. This document contains proprietary information protected by
copyright. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in
any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the
prior written consent of Entone, Inc., 20863 Stevens Creek Blvd, Suite 300, Cupertino, CA 95014, U.S.A.
DISCLAIMER
IF THIS PRODUCT DIRECTS YOU TO COPY MATERIALS, YOU MUST HAVE PERMISSION FROM THE COPY-
RIGHT OWNER OF THE MATERIALS TO AVOID VIOLATING THE LAW WHICH COULD RESULT IN DAMAGES
OR OTHER REMEDIES.
TRADEMARKS
Entone and the tagline“Connecting the Home”are trademarks of Entone, Inc. All other trademarks or
registered trademarks belong to their respective owners.
This item incorporates copy protection technology that is protected by U.S. patents and other intellec-
tual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
CHANGES
The material in this document is for information only and is subject to change without notice. While rea-
sonable eorts have been made in the preparation of this document to assure its accuracy, Entone, Inc.
assumes no liability resulting from the use of the information contained herein. Entone, Inc. reserves the
right to make changes in the product design without reservation and without notication to its users.
P/N: 99-709404-00 - V1.1
Table of Contents
OVERVIEW
2 Safety Instructions
4 What’s Included
6 Front Panel
7 Rear Panel
CONNECTING VIDEO
8 High-Denition TVs
9 Standard-Denition TVs
CONNECTING AUDIO
10 Stereo
CONNECTING TV SOURCE
11 Cable or Antenna
CONNECTING NETWORK
12 Ethernet
POWERING UP
13 Setting up Remote Control
13 Using IR Extender Receiver
14 Connecting to Power Source
15 Declaration of Conformity
QUICK START GUIDE
QUICK START GUIDE
ARIA HYBRID DTA
ARIA HYBRID DTA
32
Important Safety Instructions
• WARNING: To reduce the risk of re or electric shock, do not expose this ap-
paratus to rain or moisture.
• The apparatus shall not be exposed to dripping or splashing and that no ob-
jects lled with liquids, such as vases, shall be placed on the apparatus.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the manu-
facturer’s instructions.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or the
third prongs are provided for your safety. If the provided plug does not t into
your outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specied by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long peri-
ods of time.
• Refer all servicing to qualied service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the ap-
paratus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
• To reduce the risk of electric shock, DO NOT remove cover or back panel. No
user serviceable parts inside. Refer servicing to qualied personnel.
Important Safety Instructions (Continued)
• To help prevent electric shock, plug the power cable into properly grounded
sources. Use only properly grounded extension cords and adaptors, if they are
needed.
• The AC main plug is used as the disconnect device, the disconnect device shall
remain readily operable.
• Make sure nothing is lying on any of the cables.
• Be sure the cables are located where they will not be stepped on or tripped
over.
• Do not spill food or liquids onto the unit.
• Do not push any objects into the free slots. Doing so will damage the unit, can
cause re or electrical shock, and can short out interior components.
• Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including ampliers) that produce heat.
• Do not block cooling vents.
• Do not place the equipment in a closed-in wall unit.
• When you disconnect a cable, pull on its connector or on its strain relief loop,
not on the cable itself. Some cables have a connector with locking tabs; if
you are disconnecting this type of cable, press in on the locking tabs before
disconnecting the cables.
• When you connect a cable, make sure both connectors are correctly oriented
and aligned before connecting to avoid bending connector pins.
• For PLUGGABLE EQUIPMENT, the socket-outlet should be installed near the
equipment for easy access.
• Changes or modications not expressly approved by the party responsible
could void the user’s authority to operate this device.
Operating Information
Operating Temperature: 0 °C (32 °F) to 45 °C (113 °F)
QUICK START GUIDE
QUICK START GUIDE
ARIA HYBRID DTA
ARIA HYBRID DTA
54
What’s Included
IR Remote Control* (Optional)
2 Batteries for
Remote Control (Optional)
Aria Quick Start Guide Remote Control Guide* (Optional)
Aria Hybrid DTA
Ethernet Cable (Optional)
HDMI Cable (Optional)
Additional items that may be required (not included):
• Ethernet Cable
• HDMI Cable
• RF Coaxial Cable
• Network Router
AC Power Adapter*
*The Remote Control may vary and is dependent on your service provider. *The AC Power Adapter may vary and is dependent on your service provider.
IR Extender Receiver (Optional)
DIN-to-RCA Cable (Optional)
QUICK START GUIDE
QUICK START GUIDE
ARIA HYBRID DTA
ARIA HYBRID DTA
76
Aria — Front Panel
Name Description
1
Reset (At bottom) Reset the device factory settings with a thin metal
probe
2
Power Indicator Solid blue indicates the unit is on
Flashing blue indicates the unit is starting up
3
Smart Card Port For user with SIM format Smart Card only.
4
HD Indicator Orange dot indicates current program is playing in HD
(720p or higher) resolution
5
Link Indicator Blue dot indicates that Ethernet or Wi-Fi network con-
nection is active
Aria — Rear Panel
Name Description
1
Antenna/Cable
Connector
IEC/F port for connecting to cable / antenna source
2
IR Extender Jack To connect IR Extender Receiver
3
SD Video 9-Pin DIN conector for connecting to video output us-
ing DIN-to-RCA cable
4
HDMI Digital video and audio port for connecting to a high-
denition TV (HDTV)
5
Ethernet RJ45 plug for connecting to ADSL modem or network
access equipment
6
USB To connect USB devices such as USB Flash Drive and
External Hard Drive
(max 500mA load)
7
Power DC power jack (100-240V, Output 12V/1A)
Availability of certain features is dependent on your service provider. Availability of certain features is dependent on your service provider.
4
1
25
37
46
125
3
QUICK START GUIDE
QUICK START GUIDE
ARIA HYBRID DTA
ARIA HYBRID DTA
98
STEP 1: CONNECTING VIDEO
Aria provides two video options for connecting to your TV:
HDMI and Composite Video.
Select a video option then proceed to Step 2.
Make sure your TV is turned on and the correct video input is
selected.
Option 1: HDMI (Recommended)
If your TV has an HDMI connection,
use an HDMI cable (may not be
included) and connect Aria to the
HDMI IN port on your TV. This connection provides both video
and audio so you do not need a separate audio connection.
Proceed to “Connecting TV Source”on page 11.
Delivers the best video & audio
quality via a single cable
S-VIDEO
Cable is optional and
may not be included
Option 2: Composite Video
Use the DIN-to-RCA cable provided
and connect the yellow cable to the
yellow VIDEO IN port on your TV.
Then proceed to the next step (“Connecting Audio”) to con-
nect the red/white cables.
If you have already selected HDMI as your video connection,
then do not use this cable.
Composite Video
Delivers good picture quality
Cable is optional and
may not be included
S-VIDEO
QUICK START GUIDE
QUICK START GUIDE
ARIA HYBRID DTA
ARIA HYBRID DTA
1110
STEP 2: CONNECTING AUDIO
NOTE: If you have already selected HDMI as your video con-
nection, then skip this audio section and proceed to “Connect-
ing TV Source”on page 11.
Use the Din-to-RCA cable provided and connect the to the
Aria 9-Pin DIN connector and the red and white cables to the
AUDIO IN port on your TV.
S-VIDEO
Cable is optional and
may not be included
STEP 3: CONNECTING TV SOURCE OPTIONAL
You can connect an RF coaxial cable (sold separately) from
Aria to either a Cable TV or antenna source. Select a TV source
and proceed accordingly.
Option 1
Connect to basic unencrypted Cable TV Source
Option 2
Connect to Antenna Source (Outdoor or Indoor Antenna)
NOTE: Contact your service provider for more details. If you
have not selected TV Source, then proceed to “Connecting
Network”.
Cable not included
QUICK START GUIDE
QUICK START GUIDE
ARIA HYBRID DTA
ARIA HYBRID DTA
1312
STEP 4: CONNECTING NETWORK
Select from one of the following networking options.
Option #1
Connect to a Wireless Network via a Wireless Network Router
or Access Point
NOTE: Internal Wi-Fi is an optional feature for the Aria
Hybrid DTA. Please contact your service provider for the
availability and detailed instructions on the wireless network
conguration.
Option #2
Connect to a Wired Network via DSL, Cable Modem or Net-
work Router
Router not included
Cable is optional and
may not be included
STEP 5: POWERING UP
Setting Up Remote Control
1. Open the battery cover by pressing down on the battery
cover latch and sliding it o.
2. Insert the batteries, matching the“+” and “-” marks on the
batteries with the interior of the remote control.
3. Snap on the battery cover to close.
NOTE: Refer to the Remote Control Guide for more details
about other remote control features.
Using IR Extender Receiver
The remote control uses InfraRed (IR) light signals to control
the Aria. IR signals cannot go through walls or other solid
objects. If the line of sight of your Aria is blocked, then you can
use the IR Extender Receiver provided to extend the reach of
IR signals from the remote control.
QUICK START GUIDE
QUICK START GUIDE
ARIA HYBRID DTA
ARIA HYBRID DTA
1514
Connecting to Power Source
1. Connect the power cord to the POWER port on the back of
the Aria.
2. Plug the AC power adapter to a power outlet.
3. Follow the on-screen instructions.
NOTE: Make sure your TV is turned on and the correct video
input is selected.
Declaration of Conformity
To ensure proper use of this product, please read this manual carefully and retain it for fu-
ture reference. Should the unit require maintenance, contact an authorized service location.
WARNING: This symbol indicates the presence of uninsulated dangerous voltage within the
product’s enclosure that constitutes a risk of electric shock. Do not open the product’s case.
CAUTION: This symbol indicates you must take care; there is risk of damage to the equip-
ment or to yourself.
Declaration of Conformity (Europe Only)
This product is in conformity with the Council Directives:
•EMCDirective2004/108/EC
•LowvoltageDirective2006/95/EC
QUICK START GUIDE
QUICK START GUIDE
ARIA HYBRID DTA
ARIA HYBRID DTA
1716
Notes Notes
Indice
Altri manuali Entone Sintonizzatore
