EntraPass KT-400 Manuale utente

KT-400

Ethernet Four-Door Controller

Installation Manual

wwww.EntraPASS.com

8641 S. Warhawk Rd., Conifer, CO 80433 - Tel: 303-670-1099 - Email: [email protected]

8641 S. Warhawk Rd. Conifer, CO 80433

[email protected]

(303) 670-1099 (303) 679-8949 fax

wwww.EntraPASS.com / 8641 S. Warhawk Rd., Conifer, CO 80433 - Tel: 303-670-1099 - Email: [email protected]

wwww.EntraPASS.com

8641 S. Warhawk Rd., Conifer, CO 80433 - Tel: 303-670-1099 - Email: [email protected]

Table of contents

Pre-Installation Information........................................................................................................................ 1

Copyright Information .................................................................................................................. 1

Safety Instructions ....................................................................................................................... 1

Technical Support ..................................................................................................................................... 2

Overview ................................................................................................................................................... 3

Compatible with all EntraPass Special, Corporate and Global Editions ....................................... 3

IP Devices ................................................................................................................................ 3

Four Onboard doors ..................................................................................................................3

Communication Ports ................................................................................................................3

IP Connectivity ..........................................................................................................................3

Inputs .......................................................................................................................................4

Lock Outputs .............................................................................................................................4

Relay Outputs ...........................................................................................................................4

Reader Outputs .........................................................................................................................4

Reader Interfaces ......................................................................................................................4

Elevator Interface ......................................................................................................................4

Alarm Panel Interface ................................................................................................................4

Automatic Port Detection ...........................................................................................................4

Downloadable Firmware ............................................................................................................5

Trouble and Reporting ...............................................................................................................5

Visual Status Indicators (LEDs) ..................................................................................................5

Built-in SPI Expansion ...............................................................................................................5

System Architecture ................................................................................................................................. 9

Heartbeat LED Patterns ......................................................................................................................... 12

Technical Specifications ......................................................................................................................... 13

Electrical Specifications .......................................................................................................................... 14

KT-400 Ethernet Four-Door Controller Models, Expansion Modules Models, Related Documentation and

Miscellaneous Items ............................................................................................................................... 14

Models Information ................................................................................................................................. 16

Installing the KT-400 Ethernet Four-Door Controller .............................................................................. 17

Preparing to Install the KT-400 Ethernet Four-Door Controller .................................................17

Physical Installation ................................................................................................................... 17

Earth Grounding ........................................................................................................................ 17

Door Locking Devices ................................................................................................................ 17

Hooking Up Inputs ..................................................................................................................... 18

Connect readers and keypads ..................................................................................................18

Relay Controlled Outputs .......................................................................................................... 19

Auxiliary Outputs ....................................................................................................................... 19

Tamper Protection ..................................................................................................................... 19

Connecting the KT-400 Ethernet Four-Door Controller .......................................................................... 20

Connecting the VC-485 or the USB-485 to the RS-485 Bus ..................................................... 20

Connecting over Corporate Network (LAN) .......................................................................21

Powering the KT-400 Ethernet Four-Door Controller ............................................................................. 21

SPI Expansion Port ................................................................................................................................ 23

Important Installation Rules about Expansion Modules .......................................................................... 24

Troubleshooting ...................................................................................................................................... 28

Default Initialization .................................................................................................................29

How to reset the KT-400 Ethernet Four-Door Controller for Factory Default DHCP mode ....... 29

KT-400 Ethernet Four-Door Controller Maintenance Recommendations ............................................... 30

Configuring the KT-400 Ethernet Four-Door Controller with the Web Configuration Page .................... 31

Optional Documentation ............................................................................................................ 31

Configuring the KT-400 Ethernet Four-Door Controller with the KT-Finder ........................................... 32

Installation Checklist ............................................................................................................................... 36

Inputs and Outputs Assignments Sheet ................................................................................................. 37

Appendix A .............................................................................................................................................39

Compliance Specifications .....................................................................................................................39

UL ......................................................................................................................................... 39

UL 294 Compliance Notice ......................................................................................................39

UL 1076 Compliance Notice .................................................................................................... 39

FCC & IC ............................................................................................................................... 40

CE & C-Tick ........................................................................................................................... 40

EN50133 Compliance .............................................................................................................41

wwww.EntraPASS.com

8641 S. Warhawk Rd., Conifer, CO 80433 - Tel: 303-670-1099 - Email: [email protected]

wwww.EntraPASS.com / 8641 S. Warhawk Rd., Conifer, CO 80433 - Tel: 303-670-1099 - Email: [email protected]

wwww.EntraPASS.com

8641 S. Warhawk Rd., Conifer, CO 80433 - Tel: 303-670-1099 - Email: [email protected]

KT-400 Ethernet Four-Door Controller Installation Manual

Pre-Installation Information

To the Installer: If you are familiar with the installation, you can use the installation checklist on page 36 with

the symbol.

Safety Instructions

Important: NEVER INSTALL THE EQUIPMENT DURING A LIGHTNING STORM!

This equipment, KT-400 Ethernet Four-Door Controller Model KT-400-EU, shall be used installed and used within an

environment that provides the pollution degree max 2 and over voltages category II NON HAZARDOUS LOCATIONS, INDOOR

only. The equipment is FIXED and PERMANENTLY CONNECTED and is designed to be installed by Service Persons only;

[service person is defined as a person having the appropriate technical training and experience necessary to be aware of

hazards to which that person may be exposed in performing a task and of measures to minimize the risks to that person or other

persons.] The equipment is installed in a metallic cabinet that meets the applicable requirements for a FIRE ENCLOSURE.

Note: When installed on the North American Market, powered via the UL, cUL Listed 75VA Transformer, the KT-400 Ethernet

Four-Door Controller shall be connected to the mains by a LICENSED ELECTRICIAN in accordance with the applicable

rules of the National Electrical Code or Canadian Electrical Code regarding this type of connection.

1. The connection to the mains supply must be made as per the local authorities rules and regulations: In the UK as per

BS6701. An appropriate disconnect device must be provided as part of the building installation. Where it is not possible to rely

on the identification of the NEUTRAL in the AC MAINS SUPPLY, the disconnecting device must disconnect both poles

simultaneously (LINE and NEUTRAL).

2. AVOID setting up the equipment near heaters, air conditioners, ventilators, and/or refrigerators;

DO NOT select a place that exposes your controller to direct sunlight, excessive heat, moisture, vapors, chemicals or dust.

3. If during the installation a knockout on the cabinet is removed, it is the installer's responsibility to ensure that the same

degree of protection for the cabinet is provided by the use of bushings, fittings, adequate sealant, etc.

4. The metallic cabinet must be secured to the building structure before operation. Use four (4) stainless steel tapping

screws #8, 32 mm (1.25 in) to mount the cabinet.

5. The ground connection must be as shown within the included diagram, or equivalent.

6. Internal wiring must be routed in a manner that prevents:

- Excessive strain on wire and on terminal connections;

- Loosening of terminal; connections;

- Damage of conductor insulation;

- Reducing the clearance between SELV (Safety Extra Low Voltage) circuits and NON-POWER Limited Circuits (Battery wires);

- Route the battery wires away from the rest of the SELV circuits.

7. It is the end-user and/or installer's responsibility to ensure that the disposal of the used batteries is made according to the

waste recovery and recycling regulations applicable to the intended market.

8. There are no serviceable parts within the equipment; For any issues regarding the equipment please contact your

installer.

9. Before leaving the premises, the Ethernet communication lines must first be connected to an approved (acceptable to local

authorities) type Network Interface Device (NID), (UL installations, UL 60950 listed NID, for ULC installations CAN/CSA C22.2,

No. 60950-1 Certified NID). All wiring shall be performed according to the local electrical codes.

10. DISCONNECT POWER BEFORE SERVICING.

wwww.EntraPASS.com / 8641 S. Warhawk Rd., Conifer, CO 80433 - Tel: 303-670-1099 - Email: [email protected]

wwww.EntraPASS.com

8641 S. Warhawk Rd., Conifer, CO 80433 - Tel: 303-670-1099 - Email: [email protected]

Technical Support

For technical assistance with the KT-400 Ethernet Four-Door Controller and other EntraPASS products,

contact technical support, Monday to Friday, at (303) 670-1099.

wwww.EntraPASS.com / 8641 S. Warhawk Rd., Conifer, CO 80433 - Tel: 303-670-1099 - Email: [email protected]

wwww.EntraPASS.com

8641 S. Warhawk Rd., Conifer, CO 80433 - Tel: 303-670-1099 - Email: [email protected]

KT-400 Ethernet Four-Door Controller Installation Manual

Overview

The KT-400 Ethernet Four-Door Controller is designed to meet the highest standards of access control and point

monitoring applications. Here are the features of the KT-400 Ethernet Four-Door Controller.

Compatible with all EntraPass Special, Corporate and Global Editions

The KT-400 Ethernet Four-Door Controller is compatible with all EntraPass Editions v5.00 and higher:

- EntraPass Special Edition

- EntraPass Corporate Edition with a Multi-site Gateway

- EntraPass Global Edition with a Multi-site Gateway

- EntraPass Global Edition with a Global Gateway

- EntraPass Global Edition with a KT-NCC Network Communications Controller

IP Devices

-EntraPass: The KT-400 Ethernet Four-Door Controller can be configured with all EntraPass Editions v5.01 and

higher.

Note: A KT-400 Ethernet Four-Door Controller firmware download is possible with EntraPass v4.01 and higher.

-Web Configuration Page: The Web Configuration Page is accessible through any browser. It can be used to verify

and configure the IP settings of the following devices: the KT-400 Ethernet Four-Door Controller, the KT-

NCC and the IP Link. Refer to the procedure “Configuring the KT-400 Ethernet Four-Door Controller with

the Web Configuration Page” on page 31 for further details.

-KT-Finder: The KT-Finder is a stand-alone application that can be used to verify and configure the IP settings of the

following devices: the KT-400 Ethernet Four-Door Controller, the KT-NCC, KTES and the IP Link.

The device can be located within the same LAN or in a remote location over the internet. Refer to the

procedure “Configuring the KT-400 Ethernet Four-Door Controller with the KT-Finder” on page 32 for further details.

Four Onboard doors

The KT-400 Ethernet Four-Door Controller is a full 4 onboard doors access controller. See Figure 1 for a description of

the PCB and Figure 2 for all the connection possibilities offered by the KT-400 Ethernet Four-Door Controller.

Communication Ports

• 1 10/100Base-T (ETH1) Ethernet for network connection with the EntraPass Gateway

• 1 10/100Base-T (ETH2) Ethernet for network connection with intelligent IP peripherals

• 1 RS-232 for communication with EntraPass

• 1 RS-485 (COM1) for communication with EntraPass or loop of controllers

• 1 RS-485 (COM2) for RS-485 communication between the KT-400 and RS-485 modules

• 1 SPI for communication with SPI modules

• 1 USB 2.0 Host

Note: You can connect a loop of KT-200 controllers on the RS-485 of the KT-400 if not mixed with other controllers

(KT-100, KT-300 and KT-400).

Note: The 10/100Base-T (ETH2), RS-485 (COM2) and USB 2.0 Host communication ports are to be used ONLY on

upcoming versions of the KT-400 controller.

IP Connectivity

The KT-400 Ethernet Four-Door Controller, when used with EntraPass Special Edition or a Multi-Site Gateway, can report

events, gather its configuration through an IP connection over the LAN (Local Area Network) and over the Internet for a

WAN (Wide Area Network). In this mode, the 1st or local controller becomes a “Master Controller” and can poll up to 31

EntraPASS controller(s). The KT-400 Ethernet Four-Door Controller is compatible with all the controllers. Unlike the other

controllers, the KT-400 Ethernet Four-Door Controller asynchronously polls the controllers (KT-100, KT-200, KT-300) and

communicates with the EntraPass Gateway only when necessary. This significantly reduces the amount of bandwidth

required to operate your security system on the network.

•AES Encryption 128-Bit: The KT-400 Ethernet Four-Door Controller is extremely secure. It uses 128-bit AES

encryption to communicate with the Gateway which prevents any hacking from the internet and ensures secure

communications when used over the internet on a wide area network (WAN).

wwww.EntraPASS.com / 8641 S. Warhawk Rd., Conifer, CO 80433 - Tel: 303-670-1099 - Email: [email protected]

wwww.EntraPASS.com

8641 S. Warhawk Rd., Conifer, CO 80433 - Tel: 303-670-1099 - Email: [email protected]

Inputs

There are 16 onboard inputs on the KT-400 Ethernet Four-Door Controller. Up to 240 more can be added through the

addition of expansion modules, such as the KT-MOD-INP16, for a total of 256 inputs. If using the KT-MOD-INP16

input module as double end of line resistor, there is a128 inputs limitiation. Each input can be individually

configured for one of the following application:

• Door contact (4 onboard)

• T.Rex (Request to Exit Detector) (4 onboard)

• Interlock (4 onboard)

• Floor Selection for Elevator Application

•ElevatorAction

• External Alarm System Status (Armed / Disarmed)

• External Alarm System Alarm (Alarm / Secure)

• External Alarm System Zones

• Relays to trigger on each input in alarm event

• Zone shunt: Single or group of zones can be permanently or temporarily 'shunted' to a secure state on the same

controller. Shunt method includes:

- Zone Shunt by another Zone - When a zone in alarm is programmed to shunt another zone / group of zones.

- Zone Shunt on Unlock - When a zone is temporarily frozen to its actual state (alarm or secured) after an access

granted.

- Manual Shunt - Operator can manually 'Shunt' a zone to a secure state.

- Disarmed Door Shunt - When alarm system is disarmed, some zones may be 'Shunted' to a secure state.

- Entry / Exit Delay Shunt - When a user is in the process of disarming / arming the alarm system and entry / exit

delay prevails, some zones may be 'Shunted' to a secure state.

• Arming / Disarming Request

• Postpone Arming Request

• Tamper switch input: The tamper switch is a non-programmable 'Fixed-Function' input. It is used to identify tampering of

the KT-400 cabinet.

Lock Outputs

There are 4 onboard lock outputs and they are supervised. The locking function can also be performed by any onboard

relay configured for this functionality.

Relay Outputs

There are 4 onboard relay outputs. Up to 256 relay outputs can be supported through the addition of expansion modules

such as the KT-MOD-REL8.

Reader Outputs

There are 4 different possible outputs for each of the 4 onboard reader interfaces for a total of 16 programmable outputs.

Reader outputs are used to give user visual and/or audible feedback on the ongoing access events.

Reader Interfaces

There are 4 onboard reader interfaces. They can be programmed for Wiegand or ABA (Clock and Data) readers.

Elevator Interface

The KT-400 Ethernet Four-Door Controller supports elevator interfacing with the addition of expansion modules such as

the KT-MOD-REL8, KT-MOD-INP16 and KT-MOD-OUT16.

Alarm Panel Interface

The KT-400 Ethernet Four-Door Controller supports alarm panel interfacing with the appropriate connections made

between zone inputs, relay outputs and the alarm system panel.

Automatic Port Detection

The KT-400 Ethernet Four-Door Controller automatically detects the site communication speed set by EntraPass as well

as the communication port which can be IP (ETHERNET #1), RS-485 (COM1) or RS-232 (COM3).

wwww.EntraPASS.com / 8641 S. Warhawk Rd., Conifer, CO 80433 - Tel: 303-670-1099 - Email: [email protected]

wwww.EntraPASS.com

8641 S. Warhawk Rd., Conifer, CO 80433 - Tel: 303-670-1099 - Email: [email protected]

KT-400 Ethernet Four-Door Controller Installation Manual

Downloadable Firmware

The firmware program can be downloaded from any EntraPass workstation to the KT-400 Ethernet Four-Door Controller.

The firmware program, stored in the controller’s flash memory, is upgraded without having to change any parts.

Trouble and Reporting

The KT-400 Ethernet Four-Door Controller constantly supervises ac power and battery condition and reports “AC Lost”,

“Normal Battery”, “Low Battery”, “Battery Critical” or “No Battery”, status to the EntraPass system. Power outputs are

supervised and electronically protected against short-circuits and surges. Locking devices are also supervised for short

and open circuits.

Visual Status Indicators (LEDs)

The KT-400 Ethernet Four-Door Controller has multiple status indicators such as for troubleshooting, network activity,

power status and outputs activity. See Figure 1 for their locations.

-Heartbeat (BLUE): The Heartbeat blue LED indicates the communication status with EntraPass or the IP mode of

the controller. Refer to Table 1 for a descriptions of the heartbeat patterns.

- Diagnostic (RED) :The DIAG red LED is for factory diagnostics and should never be seen on otherwise.

-SPI Active (YELLOW): This LED signals activity on the SPI expansion port.

-COM1-RX, COM1-TX, COM2-RX, COM2-TX, RS232-RX and RS232-TX (YELLOW): The six serial port LEDs are

transmit/receive activity indicators.

-LOCK1, LOCK2, LOCK3 and LOCK4 (RED): Each lock output (Open Drain) has an indicator which turns on each

time the corresponding output is activated.

-RELAY1, RELAY2, RELAY3 and RELAY4 (RED): Each relay output has an indicator which turns on each time the

corresponding relay is activated.

-AC PWR and DC PWR (GREEN): The AC PWR LED is ON when AC power is present. The DC PWR is ON when

the DC level is sufficient for all DC terminals such as the 12V AUX. For further details, see Troubleshooting on page

28 section.

- ETH1, ETH2 LINK (GREEN): The LED is OFF when there is no Ethernet network or the cable is disconnected, and

ON when there is an Ethernet cable and network connection.

-ETH1, ETH2 TXRX (YELLOW): The LED indicates network activity.

Built-in SPI Expansion

The KT-400 Ethernet Four-Door Controller allows connection of expansion modules in order to add outputs, like relays

and open drain outputs, and inputs. See Figure 10 and Figure 11 for an example with expansion modules.

-KT-MOD-REL8: The KT-MOD-REL8 is an 8-relay expansion module. Each relay is 3 Amps, 30 VDC Form C. The

module supports daisy-chaining which can add up to 32 KT-MOD-REL8 modules for a total of 256 relay outputs per

KT-400 Ethernet Four-Door Controller.

-KT-MOD-INP16: The KT-MOD-INP16 is a 16-zone input expansion module. The module supports daisy-chaining

which can add up to 15 KT-MOD-INP16 for a total of 240 external inputs per KT-400 Ethernet Four-Door Controller.

The KT-400 Ethernet Four-Door Controller has 16 onboard inputs which gives a total of 256 inputs per controller.

-KT-MOD-OUT16: The KT-MOD-OUT16 is a 16-output expansion module. Each output is capable of 750 mA. It

gives the opportunity to address the need for external LED, lock, relay, piezo and buzzer control. The module

supports daisy-chaining which can add up to 16 KT-MOD-OUT16 modules for a total of 256 external open drain

outputs per KT-400 Ethernet Four-Door Controller.

Note: The expansion modules support daisy chaining which can add up to 32 KT-MOD-REL8 modules for a total of 256

external relays per KT-400 Ethernet Four-Door Controller. Combining input and output expansion modules gives the

flexibility to connect up to 256 inputs and 256 outputs.

wwww.EntraPASS.com / 8641 S. Warhawk Rd., Conifer, CO 80433 - Tel: 303-670-1099 - Email: [email protected]

wwww.EntraPASS.com

8641 S. Warhawk Rd., Conifer, CO 80433 - Tel: 303-670-1099 - Email: [email protected]

Figure 1: KT-400 Ethernet Four-Door Controller PCB View

wwww.EntraPASS.com

8641 S. Warhawk Rd., Conifer, CO 80433 - Tel: 303-670-1099 - Email: [email protected]

Altri manuali per KT-400

Indice

Altri manuali EntraPass Controllori

EntraPass

EntraPass KT-400 Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente