Print Actual Size A3
D0606 Slide Arm - D0701 Closer
Installation Instructions
D0606/D0701 Installation Instructions www.entro.com.au
CAUTION - Pull Side Installation Only
For Push Side Installation Order D0612 Long Slide Rail HOLD - OPEN CLIP (OPTIONAL)
23.5
43
100255
12
SLIDER
Instructions for Installation of the Door Closers (Standard Type)
Determine the installation position of the door closer
place the templet on the closed door and the top
jamb, and make holes in them with a punch or other
proper tool
Templet
Fix the link shoe to the top jamb
Fit the lever to the pinion shaft and fix it firmly
with the screw
Mount the closer on the door
Adjust the link length so that the link
makes a right angle with the top jamb,
and fix with the lock nut
FIX PINION CAP TO CLOSER BODY
Adjust the closing speed.
The door closer closes the door at two different
speeds.
The first speed can be controlled by the No.1
speed adjusting valve, and the second speed, by
the No. 2 speed adjusting valve
Track
Body
Main arm
Mounting screw CLOSING LATCHING
SLOW
No.1 CLOSING
No.2 LATCHING
FAST
REGULAR INSTALLATION
FOR CLOCKWISE OPENING DOOR
(Closer mounted on door on pull side)
SPRING POWER ADJUSTMENT
Adjust closer size according to
chart on the bottom
CC: Counterclockwise
C: Clockwise
*: Factory Pre-set
2-6 Model
No. Of TurnsSize Direction
5
3
3
0*
6
2
3
5
4
6
CC
CC
C
-
C
