ENTRYPASS EP.HIO Manuale utente
Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –WIRING GUIDE
Version: 1.04
Last Updated: 23-06-2016
EP.HIO WIRING GUIDE
Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –WIRING GUIDE
Notes:
See http://www.entrypass.net/ for updates, revisions, and download the latest installation
manual
Platform1 version 3 support 6 and 10 digits format
For existing site, P1 will detect its card database to determine 6 or 10 digits; For new site, user
can change the digits as long as the card database is empty
Please refer to separate EntryPass Platform1 User Manual for detail operation help. The
Official EntryPass Platform1 User Manual can be downloaded from our website under
“Download” section
Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –WIRING GUIDE
Technical Support
If you cannot find the answer to your question in this manual or in the Help files, we recommend you
contact your system installer. Your installer is familiar with your system configuration and should be able
to answer any of your questions.
Should you need additional information, please call our Technical Support Help desk, Monday to Friday
9:00 AM to 6:00 PM (GMT +8:00)
Method Details
Phone + 60 (3) -8068 1929
Fax + 60 (3) -8068 1922
Internet www.entrypass.net
Email support@entrypass.net
BEFORE YOU BEGIN
Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –WIRING GUIDE
CAUTION
Battery may explode if mistreated. Do not recharge,
disassemble or dispose of in fire. To prevent a risk of explosion do
not pry the battery out with a metal or conductive tool.
Preparing Your EntryPass Controllers
EntryPass controller contains numerous delicate electronic circuits and components which can become
damaged as a result of electrostatic discharge (ESD). Thus, prior to installation, please follow the instruction
below:
•Observe precautions while handling the circuit board assembly by using proper grounding straps and handling
precautions at all
•Visually ensure no onboard parts is broken, damage or contains burn mark
•Do not turn on the power supply until you completed all wiring and external add on devices installations
Instances of Non-Warranty
•Damage due to natural disaster, accident or human cause.
•Damage as a result of violating the conditions recommended in the user manual
•Damage due to improper installation
•Damage due to use of uncertified components
•Damage due to use exceeding the permitted parameters
Considerations Prior to Installation
Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –WIRING GUIDE
Communication Connector
Onboard Power LED (5V and 3.3V)
Heartbeat LED
Communication LED
Digital Input Connecter
Digital Output Connecter
Digital Output LED
Digital Input LED
Power Connector
Dip switch
32-Bits Processor
Power Connector For
Daughter Board
Expansion
Backup Battery
IDE Connector For
Daughter Board
Expansion
RJ-45 Network Port
Reset Button
Cold Start Button
Components Description
Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –WIRING GUIDE
Digital Output LED
Digital Input LED
Expansion Board
Power Cables
Digital Input Connecter
Digital Output Connecter
With the expansion board attached to the HIO controller, the HIO now support 16 Digital Inputs and 16
Digital Outputs
Components Description (With Expansion Board)
Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –WIRING GUIDE
ENTRYPASS
Power Supply Unit Specification:
•Switching Power Supply
•12V DC
•3 Amp (Minimum)
Power Supply Unit Specification
Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –WIRING GUIDE
Ensure the dip
switch setting is
unique when
there is more
than 1 HIO
controller
C-
C+
RS 485: I000 meter (Maximum)
PCC
(Pc Communicator)
RS 232: 10 meter
EntryPass Platform1
Server Access
Control System
RS232
Power
Tx
Rx
HIO 16 HIO 2 HIO 1
C2 +C2- C2 +C2- C2 +C2-
When in RS485 mode, a total of 16 sets HIO controllers can be connected to
each bus/comport.
Connecting to the PC via RS485 Mode (Alarm Monitoring
Application)
Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –WIRING GUIDE
ON
1 32 4 5
For HIO number 1
ON
1 32 4 5
For HIO number 2
ON
1 32 4 5
For HIO number 3
ON
1 32 4 5
For HIO number 4
ON
1 32 4 5
For HIO number 5
ON
1 32 4 5
For HIO number 6
ON
1 32 4 5
For HIO number 7
ON
1 32 4 5
For HIO number 8
ON
1 32 4 5
For HIO number 9
ON
1 32 4 5
For HIO number 10
ON
1 32 4 5
For HIO number 11
ON
1 32 4 5
For HIO number 12
ON
1 32 4 5
For HIO number 13
ON
1 32 4 5
For HIO number 14
ON
1 32 4 5
For HIO number 15
ON
1 32 4 5
For HIO number 16
If more than 1 HIO controller is connected to the PCC, the dip switch must be configure
according to the pattern shown above. The default dip switch configuration of the HIO
controller is 1 (ON)
HIO Dip Switch Setting (Alarm Monitoring Application)
Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –WIRING GUIDE
Cat-5 Cat-5
Network Switch
EntryPass Platform1 Access
Control System
Default HIO controller network
setting:
1) IP address: 192.168.1.100
2) Subnet Mask: 255.255.255.0
3) Gateway: 0.0.0.0
4) Server IP address:
192.168.1.254
To change the network setting,
simply logon to the web server.
The distance from HIO controller to network switch should not more than 100
meter . Please ensure the jumper is inserted on JP1 3-4 for TCP/IP mode.
JP1
Connecting to the PC via Network (Alarm Monitoring
Application)
Indice
Altri manuali ENTRYPASS Controllori
