Indicator Light
The indicator light displays the status of the unit. It indicates the following:
Steady Blue: Normal working.
Short single white flash: Command signal received.
White flash 3 times: Identification and new controller paired.
Red flashing: overload protection active.
Yellow flashing: thermal protection active.
Green flash: Running scene program.
Slow green flash: Scene program timing error (Phone reconnect required)
Operation
Bluetooth Pairing
The Light Mesh app is needed to connect via Bluetooth. The app is available for iPhones 4S and later and Android 4.3 and later. The
app can be found by searching for “Light Mesh” in the Apple App Store, the Google Play Market or by following this link.
Make sure the phone’s Bluetooth is switched on when connecting to the controller. Do not pair to the controller from the phone’s
Bluetooth settings. The app will connect to the device without the need to set up in the setting’s page.
Device Name and password can be set when adding a new controller. “Device” in the app can refer to the either one controller or
multiple controllers all under one login and password. Subsequent controllers can be added to the same device or set up on their own
device. Each device is completely independent. Controllers cannot be linked across different devices with different device names and
passwords.
Additional controllers can be added to a device in the Setup tab.
Reconnecting
By default, the app is set to automatically re-connect with the most recently paired dimmer when in range. If you become
disconnected, you can use the “Connect to ready devices” button to reselect your device.
