Epcom X905 Series Manuale utente
User Manual
Bright Beacon
X905 SERIES
Introduction
The bright bubble X905 Series offers high power LEDs Gen III (Generation III) as
light sources, a compact structure. With degree of protection IP65.
With its novel design, its features are high brightness, low current consumption,
easy installation and long service time.
The equipment is specially designed to be installed in any type of emergency
vehicle.
Note: Please read the manual before installing
Dimensions
Technical Data
• Voltage: 12 Vdc
• Consumption: 1 A max
• LED quantity: 6
• Power: 20 W
• Mounting: Magnetic
• Flash pattern: 1 (60 FPM)
• Power supply cable: 3.5 m
Recommendations
• The warning light is designed for outside use of the vehicle.
• Keep the equipment ventilated.
Content
• Beacon Series X905 1 PZ
• User Manual 1 PZ
High intensity equipment. Do not look
directly while the device is on. May
cause momentary blindness and/or
permanent eye damage.
IMPORTANT Please, read the instructions
before installing your equipment
WARNING You must be careful when
positioning this equipment, for
that the light and / or cable do not interfere
with the proper functioning of the
airbag of both the driver and the
passenger. Not paying attention to this warning can cause serious or fatal
injuries
Indice
Altri manuali Epcom Attrezzatura di illuminazione
