Epik Learning HIGHQ ELT10101H Manuale utente
User Guide
Guide de l'utilisateur
Guía del Usuario
User Guide
Models: ELT10101H
ELT0802H
ELT0704H
Package contents:
• HIGHQTM Learning Tab.
• Quick Start Guide
• AC Charger
• USB Cable
• Matching Gel Case
Safety Warnings
Do not disassemble the product or accessories.
Do not use alcohol, thinner, or benzene to clean the surface of the device.
The device should be charged for about 6 hours during the first three charge cycles.
Do not store the device in places with high temperature, humidity, or dust. Avoid
dropping or strong impact.
Use an appropriate volume setting. High volume may cause hearing damage when
using headphones.
To charge the device, use the included USB cable and AC adapter.
When transferring data to/from a computer, do not suddenly disconnect the cable;
this may cause the device to malfunction. Use a “Safely Remove Hardware” or
“Eject” function on the computer.
Obey all local laws and regulations when using the device, such as when driving or
aboard an aircraft.
The 8-inch & 10-inch tablets are water resistant. All other devices and accessories
are neither water resistant nor waterproof.
Index
Technical Specifications 4
Micro SD Card Slot 5
Charging 5
Initial Setup 5
Power On/O 5
Before Starting 5
Getting Started 6
Software Overview 10
Unlock and Lock 10
Navigation Bar 10
Turn Wi-Fi On/O and Choosing a Network 11
Camera 11
Browsing the Internet 12
Downloading Content From the Google Play Store 12
Backup with Google 12
Remove Google User/Email/Account 12
Return Tablet to Factory Settings 13
Disclaimer 13
Welcome!
Thank you for purchasing your new
HIGHQTM Learning Tab. This User Guide
will provide step-by-step instructions to
help you learn to use your new device.
After opening the box, make sure the
package contents are available for you.
Quad-core ARM® Cortex-A53 MPCore™ at 1.3 GHz
Android 8.1 Go Edition (Oreo)
Google Browser
32GB
1GB DDR3
Micro SD Card Slot, Support up to 64GB flash
10.1" TFT Touch Panel
Front 2.0 megapixel, Rear 2.0 megapixel
800*1280
Touch Screen
8R/1.0w*2 built in speaker
3.5 mm
Micro USB
3.7V/6000mAH (500 Times in life) with
Lithium-ion Polymer Battery
10.06” x 6.70” x 0.43” (WxHxD) without case
1.25 lbs without case
AC 110-240V 50/60Hz DC 5V/2A
-10 C/14 F - 40 C/104 F
Wi-Fi (802.11 b/g/n)
CPU (Processor) Operating
System
Browser
Internal Storage
Memory (RAM)
Expansion Slot
Screen
Camera
Screen Resolution
Input Method
Built-in speaker Earphone
Jack
USB Cable
Battery
Size
Weight
Voltage
Operating Temperature
Network-Access
Technical Specifications
10.1” Tablet
Quad Core MTK8163 1.3GHZ
Android 8.1 Go Edition (Oreo)
Google Browser
16GB
1GB DDR3
Micro SD Card Slot, Support up to 64GB flash
8" TFT Touch Panel
Front 0.3 megapixel, Rear 2.0 megapixel
800*1280
Touch Screen
8R/1.0w*2 built in speaker
3.5 mm
Micro USB
3.7V/4000mAH(500 Times in life) with
Lithium-ion Polymer Battery
8.76” x 6.55” x 0.625” (WxHxD) with case
1.6 lbs with case
AC 110-240V 50/60Hz DC 5V/2A
-10 C/14 F - 40 C/104 F
Wi-Fi (802.11 b/g/n)
CPU (Processor) Operating
System
Browser
Internal Storage
Memory (RAM)
Expansion Slot
Screen
Camera
Screen Resolution
Input Method
Built-in speaker Earphone
Jack
USB Cable
Battery
Size
Weight
Voltage
Operating Temperature
Network-Access
8” Tablet
Quad Core MTK8163 1.3GHZ
Android 8.1 Go Edition (Oreo)
Google Browser
16GB NAND Flash
1GB DDR3
Micro SD Card Slot, Support up to 32GB flash
7” TFT Touch Panel
Front 0.3 megapixel, Rear 2.0 megapixel
1024 x 600 pixels
Touch screen
8R/1.0w*2 built-in speaker
3.5 mm
Micro USB
3.7V/3600mAH with Lithium-ion Polymer Battery
7.98” x 5.25” x 0.625” (WxHxD) with case
0.85 lbs with case
AC 110~240V 50/60Hz; DC 5V/2A
-10oC/14oF– 40oC/104oF
Wi-Fi (802.11 b/g/n)
CPU (Processor) Operating
System
Browser
Internal Storage
Memory (RAM)
Expansion Slot
Screen
Camera
Screen Resolution
Input Method
Built-in speaker Earphone
Jack
USB Cable
Battery
Size
Weight
Voltage
Operating Temperature
Network-Access
7” Tablet
4
Micro SD Card Slot
Your tablet is equipped with a micro SD memory card slot. You can use a micro
SD memory card (sold separately) for additional storage of music, photos, files,
etc. When inserting a micro SD memory card, insert as illustrated. Be careful not
to insert it at an angle as doing so may cause damage to the tablet or memory
card. To remove the card, press firmly and the card will pop out. It is
recommended to eject the micro SD card only when the tablet is powered o.
Charging
Use the included USB cable and AC adapter to charge the tablet. Other
chargers may cause damage. Do not use the charger in a humid environment.
Do not allow the charger to come in contact with liquid or moisture. Plug the AC
Adapter into the outlet, then connect the micro USB connector to the tablet.
Initial Setup
To get started with your new HIGHQTM Learning Tab, ensure that your tablet has
been fully charged before the first use. Press and hold the power button for 5
seconds until you see the HIGHQTM Learning Tab logo on screen. Allow 1 minute
for the tablet to power on. You will be prompted to start the initial setup process.
Power On/Off
To power on your tablet, press and hold the power button for 5 seconds.
To put your tablet in sleep mode, press and release the power button. This
mode is best if you will use the device again soon.
To power o your tablet, press and hold the power button for 2 seconds, then
tap Power o. This is best when the tablet will not be used for a longer period
(more than a few days).
Before starting
Make sure a Wi-Fi connection is available.
We recommend using a Google Account
(or Gmail) with your tablet. If you do not
have one, this guide will help you sign up
for a free Google Account.
5
Geing Started
Make sure a Wi-Fi connection is available. We recommend using a Google
Account (or Gmail) with your tablet. If you do not have one, this guide will help
you sign up for a free Google Account.
Charging
1. Before first use, we recommend
charging the tablet for 6 hours.
2. Plug in the included AC adapter.
3. Connect the USB cable from the AC
adapter to the tablet.
Language Selection
1. Scroll through the languages and
highlight your preference.
2. Tap Next.
Turn Power On
1. Press and hold the POWER button
for 3 seconds until the lighted
screen appears.
1
2
6
Connect to Wi-Fi
1. Tap your Wi-Fi Network name.
2. If your Network has a
password you will be
prompted to enter it.
3. Tap Connect.
Got Google?
1. If you already have a Google
Account, enter your email and
tap NEXT, and enter your
password.
2. If not, tap SKIP and you can
set one up.
Create a Google
Account
1. Enter your first and last name
in the appropriate boxes. Tap
the right arrow to continue.
7
Recovery Phone
1. Follow the instructions on screen if you
would like to set up recovery phone.
2. If not, you can do this later by logging
in to google.com.
Setup Payment Info
You may choose to add a credit card to your account for digital purchases.
This can be done later at wallet.google.com.
Username and Password
1. Enter your desired username and tap the right arrow to continue.
2. Enter a password in the first box and repeat it in the second box. Tap the
right arrow to continue.
8
Google Services
Uncheck any services that you do not wish to have active on your tablet, then
tap the right arrow to continue.
Foow the prompts on screen to set up a Kidomi
account and get access to hundreds of games, videos,
and reading activities.
and reading activities.
9
Soware Overview
Your HIGHQTM Learning Tab features the AndroidTM operating system, version 8.1
Go Edition (Oreo). The included Google PlayTM store app gives you access to a
catalog of over one million apps. †† In addition, your tablet comes packed with
hundreds of learning games and reading activities as part of Kidomi, including
multi-award winning apps like Looney TunesTM Phonics, The Very Hungry
Caterpillar, Crayola Color, Draw and Sing, Toca Boca Hair Salon, and
iHeartRadio. Also, you'll find a suite of utilities designed especially for kids,
including a browser, photo viewer, and video player.
Unlock and Lock
To unlock the tablet, drag the padlock upwards.
To lock, simply press the power button to lock the tablet (sleep mode).
Navigation Bar
The navigation bar along the bottom of the screen allows you to switch between
apps. In some apps, the navigation bar becomes hidden. To reveal it, swipe up
from the bottom edge of the screen. The left button, back, takes you back one
screen. The center button, home, takes you to the home screen. The right
button, recent apps, brings up thumbnails of recently used apps; tap one to
switch to it.
10
Questo manuale è adatto per i seguenti modelli
2
Indice
Lingue:
Altri manuali Epik Learning Tavoletta
