2
CONFIGURATION
SOFTWARE
HARDWARE
TABLE OF CONTENTS
1. General 3
1.1 Symbol Assertion 3
1.2 Safety Instructions 3
1.3 Installing the Enclosure 3
2. Product Description 3
3. Installation 4
3.1 Installing the Enclosure 4
3.2 Mounting Type T2 (Duct Mounting) 4
3.2.1 Mounting with Brackets 4
3.2.2 Mounting with a Flange 4
3.3 Mounting Type T3 (Remote Probe) 5
3.3.1 Installing the enclosure 5
3.3.2 Installing the probe 5
3.4 Mounting Type T26 (Remote Probe, Pressure-tight up to 10 bar / 145 psi) 5
3.4.1 Installing the Enclosure 5
3.4.2 Installing the Probe 5
4. Electrical Connections 7
4.1 Connection Diagram 7
4.2 Connection Diagram with Plug Connections (Optional) 7
4.3 Assignment USB - Interface Cable 7
5. Operating Components 8
5.1 Circuit Board 8
5.2 Jumpers for Setting the Output Signal 8
5.3 Jumpers for Setting the Velocity Response Time 8
5.4 Display Module with Buttons (Optional) 9
6. Velocity / Temperature Calibration 10
6.1 Selecting the Appropriate Calibration Method
(1-point or 2-point Calibration) 10
6.1.1 General Information on 1-point v/T Calibration: 10
6.1.2 General Information on 2-point v/T Calibration: 11
6.2 Velocity Calibration 11
6.2.1 Calibration Procedure Using Configuration Software 11
6.2.2 Calibration Procedure Using Buttons on the Display Module (Optional) 11
6.3 Temperature Calibration 11
6.3.1 Calibration Procedure Using Configuration Software 11
6.3.2 Calibration Procedure Using Buttons on the Display Module (Optional) 11
6.4 Resetting to Factory Calibration 12
6.4.1 Resetting v/T to Factory Calibration: 12
6.4.2 Resetting v to Factory Calibration: 12
6.4.3 Resetting T to Factory Calibration: 12
7. Self-Help / Maintenance 13
8. Spare Parts / Accessories 13
9. Technical Data 13
1. General Information 14
2. Installation 14
3. Menu Items 16
3.1 File 16
3.2 Help 16
4. EE75 Configurator 16
4.1 Start 16
4.2 Analog 17
4.3 Display 17
4.4 Response Time 17
4.5 Cross Section 18
4.6 Probe Cable 18
4.7 Switching Off 19
4.8 Media Correction 19
4.9 Calibration 19
4.9.1 Information on 1-point v/T Calibration 20
4.9.2 Information on 2-point v/T Calibration 20
4.9.3 V Calibration Procedure Using the Configuration Software 20
4.9.4 T Calibration Procedure Using the Configuration Software 20
4.9.5 Activating Factory Calibration 20
4.10 Measuring Values 21
4.11 Information 21
