DPK 5 Instruction Manual
SAFETY INSTRUCTION
Read this manual carefully and completely. Keep it for future reference.
This product is not intended to be used by children or persons with limited mental or motoric capabilities.The product mut be secured against such use.
Theuse ofthis product isonly allowedin thewaydescribed in thesection„description andfunction“.Do notexpose the product toheat ormoistureand donot putany objects ontop ofthe product.Thedevice
can get warm during operation.
Not attending to the safety instructions may result in injury and/or property damage.
DESCRIPTION AND FUNCTION
This converter brings HDMI signals to the DisplayPort input of your monitor or beamer.
INSTALLATION
1. Make sure that all devices are switched o before starting the installation of the product.
2. Connect the signal source to the HDMI input (HDMI In) of the converter.
3. Connect the DisplayPort output (DisplayPort Out) to the DisplayPort input of your monitor or beamer.
4. Connect the included AC/DC adapter to the DPK 5.
5.Turn on all connected devices.
6.When not in use, remove the converter from main circuit.
Set the resolution of the signal source to maximum 1080p (HDMI) respectively 1200p (DVI).
SPECIFICATIONS
input: HDMI socket
input signal: compatible to HDMI, DVI, mini DVI
output: DisplayPort socket
output signal: DisplayPort, mini DisplayPort
cable on input side: HDMI > HDMI, DVI > HDMI, mini DVI > HDMI
cable on output side: DisplayPort > DisplayPort, DisplayPort > mini DisplayPort
max. resolution: 1920x1080p (HDMI), 1920x1200p (DVI)
operating temperature: 0°C ... +70°C
AC/DC adapter: 5V DC, 2A
power consumption: 5W
5SETUP, MAINTENANCE AND CARE
The product is for use in dry, humid indoor rooms only. Protect the product against moisture, direct sunlight or high temperatures. If the product is not in use, disconnect it from mains circuit.
Clean the product with a soft dry cloth. If necessary, the cloth may be wetted with water.
6DISPOSAL INSTRUCTIONS acc. to ElektroG3
1. waste management of electronic and electrical equipment products. The symbol„crossed out dustbin“ signies that you are obliged to recycle these devices separately from unsorted
municipal solid waste.The disposal over domestic waste, e.g. residual waste or yellow recycle bin, is forbidden. Avoid any bad throw by correct disposal at specic collecting points.
2. extraction of batteries and lamps. Any batteries, accumulators or lamps which can be removed nondestructively from the legacy device must be cleared from before disposal and must be
disposed separately as batteries or lamps.
3. return possibilities of legacy devices. Legacy devices can be submitted free at the public possibilities for return or collection. A proper disposal of the equipment is esured in this way. Under
certain conditions a return to a retailer is also possible.
4. WEEE registration number
We are registered at the stiftung EAR, Nordostpark 72, 90411 Nürnberg as a distributer of electronic and electrical equipment products by the registration number DE72183678.
WEEE-directive: 2002/96/EG
WEEE-No: DE72183678
8MISCELLANEOUS
Declaration of Conformity
With the CE sign e+p Elektrik Handels GmbH & Co. KG ensures that this
product corresponds to the standards and directives of the European regulations.
The warranty for this product does only cover the product itself.The manufacturer is not liable for damages to persons or property damage caused by improper installation, operation or maintenance.
If any damage or fault is detected on your product, please contact your local specialist dealer. All rights for misprints, technical changes of product, packaging or documentation reserved.
Installation, Betrieb oderWartung entstanden sind. Falls ein Fehler oder Defekt am Produkt festgestellt wird, wenden Sie sich bitte an Ihren Fachhändler.
Druckfehler und technische Änderungen an Produkt,Verpackung und Dokumentation bleiben vorbehalten.
Elektrik Handels GmbH & Co. KG • Am Ohrt 7 • D-59469 Ense-Höingen
Tel.: 0 29 38 - 98 76 20 • Fax: 0 29 38 - 98 76 22 2 • www.e-und-p.de
MONITOR
HDMI
PS 4
Eingang
INPUT
Ausgang
OUTPUT
DP
