Epson S5U1C88000P Manuale utente

MF1434-01

CMOS 8-BIT SINGLE CHIP MICROCOMPUTER

(S1C88 Family Peripheral Circuit Board)

S5U1C88000P

Manual

NOTICE

No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko

Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any

liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or

circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such

as medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there

is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright

infringement of a third party. This material or portions thereof may contain technology or the subject relating to strategic

products under the control of the Foreign Exchange and Foreign Trade Law of Japan and may require an export license from

the Ministry of International Trade and Industry or other approval from another government agency.

New configuration of product number

Starting April 1, 2001, the product number has been changed as listed below. Please use the new

product number when you place an order. For further information, please contact Epson sales

representative.

Devices

S1 C 88104 F 0A01

Packing specification

Specification

Package (D: die form; F: QFP)

Model number

Model name (C: microcomputer, digital products)

Product classification (S1: semiconductor)

Development tools

S5U1 C 88348 D1 1

Packing specification

Version (1: Version 1)

Tool type (D1: Development Tool)

Corresponding model number (88348: for S1C88348)

Tool classification (C: microcomputer use)

Product classification

(S5U1: development tool for semiconductor products)

CONTENTS

S5U1C88000P MANUAL EPSON i

(S1C88 FAMILY PERIPHERAL CIRCUIT BOARD)

S5U1C88000P Manual (S1C88 Family Peripheral Circuit Board)

This manual describes how to use the S1C88 Family Peripheral Circuit Board (S5U1C88000P). This circuit

board is used to provide emulation functions when it is installed in the ICE (S5U1C88000H5), a debug-

ging tool for the 8-bit Single Chip Microcomputer S1C88 Family.

This manual describes only the common specifications of the S1C88 Family Peripheral Circuit Board

(S5U1C88000P), so refer to the S5U1C88000P manual (Peripheral Circuit Board for S1C88xxx) for the model

dependent specifications. For details on ICE functions and how to operate the debugger, refer to the

separately prepared manuals.

Contents

CHAPTER 1INTRODUCTION____________________________________________ 1

1.1 Outline of S5U1C88000P .............................................................................1

1.2 Components of S5U1C88000P .....................................................................1

1.3 External View of S5U1C88000P...................................................................1

CHAPTER 2SETTING UPTHE S5U1C88000P _____________________________ 2

2.1 Installing the S5U1C88000P in the ICE (S5U1C88000H5) .................................. 2

2.2 Downloading Cricuit Data .............................................................................3

CHAPTER 3PRODUCT SPECIFICATIONS ___________________________________ 4

CHAPTER 1: INTRODUCTION

S5U1C88000P MANUAL EPSON 1

(S1C88 FAMILY PERIPHERAL CIRCUIT BOARD)

CHAPTER 1INTRODUCTION

1.1 Outline of S5U1C88000P

The S5U1C88000P provides on a board all the peripheral circuits of S1C88 Family microcomputers other

than the core CPU. By installing this board in the ICE (S5U1C88000H5) you can use it to emulate each

model in the S1C88 Family. This board contains a programmable gate array (FPGA) and supports each

model by downloading the circuit data from the host PC to the FPGA via the ICE.

1.2 Components of S5U1C88000P

After unpacking your S5U1C88000P package, check to see that all of the following components are

included.

(1) S5U1C88000P main unit.............................................................................................. 1 board

(2) I/O cable (80-pin/40-pin ×2 flat type) .................................................................... 2 pairs

(3) Connector for connecting to target system (40-pin)............................................... 4 pieces

(4) Warranty card ............................................................................................................... 1 card

(5) User registration card .................................................................................................. 1 card

(6) Precautions on using the S5U1C88000P Peripheral Circuit Board ...................... 1 sheet

(7) S5U1C88000P Manual (S1C88 Family Peripheral Circuit Board) ........................ 1 copy

1.3 ExternalView of S5U1C88000P

Fig. 1.3.1 External view of S5U1C88000P

SW1

I/O #1 connector

I/O #2 connector

CHAPTER 2: SETTING UP THE S5U1C88000P

2EPSON S5U1C88000P MANUAL

(S1C88 FAMILY PERIPHERAL CIRCUIT BOARD)

CHAPTER 2SETTING UPTHE S5U1C88000P

2.1 Installing the S5U1C88000P in the ICE (S5U1C88000H5)

Insert this board along by the lower guide rail of the ICE (S5U1C88000H5). The system may fail to

operate if this board is not adequately mounted, so be sure to mount it securely.

Fig. 2.1.1 Installing the S5U1C88000P

∗ The name 'ICE88UR' on the development tool is

the old name of the product.

CHAPTER 2: SETTING UP THE S5U1C88000P

S5U1C88000P MANUAL EPSON 3

(S1C88 FAMILY PERIPHERAL CIRCUIT BOARD)

2.2 Downloading Circuit Data

This board (S5U1C88000P) comes with the FPGAthat contains factory inspection data, therefore the

circuit data for the model to be used should be downloaded. The following explains the downloading

procedure.

1) Set the switch "SW1"*1on this board to the "3" position.

2) Install this board to the ICE (S5U1C88000H5) as shown in Section 2.1.

3) Connect the ICE to the host PC. Then turn the host PC and ICE on.

4) Invoke the debugger included in the ICE or assembler package. For how to use the ICE and debugger,

refer to the manuals supplied with the ICE and assembler package.

5) Download the circuit data file (.mot) corresponding to the model by entering the following commands

in the command window.

>XFER (erase all)

>XFWR <file name> (download the specified file)*2

>XFCP <file name> (compare the specified file and downloaded data)

6) Terminate the debugger and then turn the ICE off.

7) Remove this board from the ICE and set the switch "SW1" on the board to the "1" position.

8) Install this board to the ICE again.

9) Turn the ICE on and invoke the debugger again. Debugging can be started here.

∗1 See Figure 1.3.1, "External view of S5U1C88000P", for the location of SW1.

∗2 The downloading takes about 5 minutes.

CHAPTER 3: PRODUCT SPECIFICATIONS

4EPSON S5U1C88000P MANUAL

(S1C88 FAMILY PERIPHERAL CIRCUIT BOARD)

CHAPTER 3PRODUCT SPECIFICATIONS

The specifications of the S5U1C88000P are listed below.

S5U1C88000P

Dimension: 247.5 mm (wide) ×165 mm (depth) ×44.6 mm (height)

Weight: Approx. 500 g

Power supply: DC 5 V ± 5%, less than 1 A (supplied from ICE main unit)

I/O connection cable (80-pin)

S5U1C88000P connector: KEL8830E-080-170L, or equivalent

Cable connector (80-pin): KEL8822E-080-171 ×1

Cable connector (40-pin): 3M7940-6500SC ×2 pairs

Cable: 40-pin flat cable ×2 pairs

Interface: CMOS interface (3.3 V)

Length: Approx. 40 cm

Monitor signal cable

S5U1C88000P connector: 3M7610-5002SC, or equivalent

Cable connector (10-pin): 3M7910-6500SC ×1

Interface: CMOS interface (3.3 V)

Length: Approx. 40 cm

Accessories

40-pin connector for connecting to target system:

3M3432-6002LCSC ×4

Indice

Altri manuali Epson Hardware per computer

Epson

Epson S2R72A21 Istruzioni per l'installazione e il funzionamento

Epson

Epson UB-E04 Manuale utente

Epson

Epson S5U1C88348T Manuale utente

Epson

Epson UB-S01 Manuale utente

Epson

Epson UB-U01III Manuale utente

Epson

Epson IEEE-488 Manuale utente

Epson

Epson S1C63358 Manuale utente

Epson

Epson UB-E04 Manuale utente

Epson

Epson IMU G Series Manuale utente

Epson

Epson S1C63000 Manuale utente

Epson

Epson S1C63454 Manuale utente

Epson

Epson S5U1C63000A Manuale utente

Epson

Epson S1C17704 Manuale utente

Epson

Epson S1C63656 Manuale utente

Epson

Epson 0C88832 Manuale utente

Epson

Epson E0C6001 Manuale utente

Epson

Epson G-Series Manuale utente

Epson

Epson S1C33210 Manuale utente

Epson

Epson MF1436-02 Manuale utente

Epson

Epson PP-100II Manuale per l'uso e la cura

Epson

Epson C11CA31121 Manuale utente

Epson

Epson Computer Istruzioni per l’uso

Epson

Epson S1C33 Series Manuale utente

Epson

Epson S1D13505 Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente