Notes on Network Connection
•Many wireless home network connection problems during set up can often be fixed
by re-setting the access point or wireless router. After connecting the unit to the
home network, quickly power off and/or disconnect the power cable of the home
network router. Then power on and/or connect the power cable again.
•Depending on the Internet service provider(ISP), the number of devices that can
receive Internet service may be limited by the applicable terms of service. For details,
contact your ISP.
•Our company is not responsible for any malfunction of the unit and/or the Internet
connection feature due to communication errors/malfunctions associated with your
broadband Internet connection, or other connected equipment.
•Some Internet content may require a higher bandwidth connection.
•Even if the unit is properly connected and configured, some Internet content may not
operate properly because of Internet congestion, the quality or bandwidth of your
Internet service, or problems at the provider of the content.
•Some Internet connection operations may not be possible due to certain restrictions
set by the Internet service provider (ISP) supplying your broadband Internet
connection.
•Any fees charged by an ISP including, without limitation, connection charges are
your responsibility.
•The use of a “Router” may not be allowed or its usage may be limited depending on
the policies and restrictions of your ISP. For details, contact your ISP directly.
•The wireless network operates at 2.4 GHz radio frequencies that are also used by
other household devices such as cordless telephone, Bluetooth devices, microwave
oven, and can be affected by interference from them.
•Turn off all unused network equipment in your local home network. Some devices
may generate network traffic.
•For the purpose of the better transmission, placing the unit from the access point as
close as possible.
•In some instances, placing the access point or wireless router at least 0.45 m above
the floor may improve the reception.
•Move closer to the access point if possible or re-orient the unit so there is nothing
between it and the access point.
•The reception quality over wireless depends on many factors such as type of the
access point, distance between the unit and access point, and the location of the
unit.
•Set your access point or wireless router to Infrastructure mode. Ad-hoc mode is not
supported.
