Epson BrightLink 455Wi Manuale utente
BrightLink 455Wi
TM
Guide rapide
Installation du logiciel
Utilisation du projecteur
Résolution des problèmes
Avis et garantie
Keep this book with the pens and remote control at all times.
Conservez ce guide avec les crayons et la télécommande en tout temps.
Quick Guide
Installing the Software
Using the Projector
Solving Problems
Notices and Warranty
2
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Quick Projector Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installing the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installing the Pen Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing the Remote Control Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Connecting the Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Turning the Projector On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Adjusting the Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Calibrating the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Using the Interactive Pens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Using the Pen as a Mouse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Using TeamBoard Draw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Using the Tablet PC and Ink Functions . . . . . . . . . . . . . . . . . . . . . . . . . 21
Solving Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Problems and Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Where To Get Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Epson America, Inc. Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Copyright Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
3
Introduction
Your BrightLink™455Wi projector turns any wall into an interactive whiteboard.
After your projector has been installed, read this booklet to:
■Install the software on your computer
■Connect the cables to your computer
■Use the remote control
■Turn on the projector and adjust the image
■Launch the Easy Interactive Driver
■Calibrate and use the pens
■Launch TeamBoard Draw
■Solve basic problems
This booklet explains how to use the projector with a laptop or other computer.
You can also connect the projector to video players, document cameras, or other
equipment. For additional information, see the on-screen User’s Guide. For
network information, see the on-screen EasyMP®Network Projection Operation
Guide included on the BrightLink 455Wi CD.
Before using the projector, make sure you read the safety instructions in the on-
screen User’s Guide on the projector CD.
Please follow these guidelines as you read your projector instructions:
Warning:
Warnings must be followed carefully to avoid bodily injury.
Caution:
Cautions must be observed to avoid damage to your equipment.
Note:
Notes contain important information about your projector.
English
4Introduction
Quick Projector Setup
Follow the steps on pages 4 and 5 to get up and running fast. Copy these pages,
laminate if necessary, and keep with the projector as a “cheat sheet.” If you need
more detail, turn to the page listed for each step.
1. Install Easy Interactive Driver and TeamBoard Draw (see page 6). Use the
CDs that came with the projector, or download from:
epson.com/support/brightlinkdownloads (U.S.)
epson.ca/support/brightlinkdownloads (Canada)
2. Make sure the batteries are installed in the interactive
pens and remote control (see pages 8 and 9).
Press the button on the pen. If the light turns green,
the batteries are installed and charged.
3. Connect the VGA computer cable and
USB cable to your PC or Macintosh®
(see page 10).
4. Turn on the projector by pressing the Ppower button on the remote control
(see page 12). If you need to adjust the image, see page 13.
5. Display an image from your computer. If the image doesn’t appear, see
page 22 or try one of the following:
■On some PC laptops, you may need to hold down the Fn key on the
keyboard and press F7 or the function key that lets you display on an
external monitor. It may have an icon such as , or it may be labelled
CRT/LCD.
■On a MacBook®, you may need to open your Display Preferences and
select Detect Displays,Show displays in menu bar, or Mirror
Displays.
■Try pressing the Source Search button on the remote control.
Quick Projector Setup 5
6. Launch Easy Interactive Driver on your computer. You should see the
pen icon in lower right corner of your screen (Windows®) or in the Dock
(Mac OS®). If you don’t see the icon, see page 14 or do one of the following:
■Windows: select or Start > All Programs or Programs > Epson
Projector > Easy Interactive Driver.
■Mac OS: open the Applications folder, then select the Easy Interactive
Driver icon.
7. Calibrate your system (see page 15).
■Windows: click the pen icon in the system tray on your taskbar
(lower right corner of your screen), then select Calibrate (Normal).
■Mac OS: click the pen icon in the Dock, select Calibrate from the
menu bar, then select Calibrate (Normal).
■After you read the message about calibration, click
OK.
■Use the interactive pen to touch each flashing green
circle as it appears. Continue until all the circles stop
flashing and turn black.
■Hold the pen at an angle, and make sure you are not casting a shadow on
the pen.
■If you make a mistake, press Esc on your computer keyboard and restart
calibration.
8. Launch TeamBoard Draw (see page 18).
■Windows: select or Start > All Programs or Programs >
Teamboard > Annotation.
■Mac OS: Select the TeamboardAnnotate icon on your screen.
You see the TeamBoard Draw dashboard:
Collapse
dashboard
Open drawing
toolbar Use virtual keyboard
Select Freehand or
Rectangle to capture screen
Open
application
list
Open whiteboard screen
6Getting Started
Getting Started
Before you can use your interactive projector, you need to install the software and
connect the cables to your computer. Then you can turn on the projector and
calibrate.
Installing the Software
This section explains how to install the software for the interactive pens and your
on-screen manuals.
Periodically, it’s a good idea to check Epson’s support website for free updates to
your Easy Interactive software. Visit epson.com/support/brightlinkdownloads
(U.S.) or epson.ca/support/brightlinkdownloads (Canada).
Even if you already have annotation software, you must install the Easy Interactive
Driver from the CD labeled “Epson Projector Software for Easy Interactive
Function.”
Installing the Easy Interactive Driver
1. Insert the CD labeled “Epson Projector Software for Easy Interactive
Function” in your computer.
Windows: If you see the AutoPlay window, click Run
EIDriverVxxx_Setup.exe. If you see a User Account Control screen,
click Continue or Yes.
Mac OS: Double-click EIDriverVxxx_Setup in the Epson window.
2. Select your language.
3. Follow the on-screen instructions to install the software.
Installing the Software 7
4. When you see one of the following screens, select Register to Startup
(Windows) or Start up (Macintosh) and Launch Easy Interactive Driver.
5. Click Install (Windows) or Continue (Mac OS).
6. Follow the on-screen instructions to finish installing the software and start
Easy Interactive Driver.
Installing the Manuals
1. Insert the BrightLink 455Wi CD in your computer.
Windows: If you see the AutoPlay window, click Run Setup.exe. If you see a
User Account Control screen, click Continue or Yes.
Mac OS: Double-click the Epson icon.
2. Select your language.
3. Follow the on-screen instructions to register your projector and install the
manuals.
Windows Mac OS
8Getting Started
Installing TeamBoard Draw
TeamBoard Draw annotation and presentation software lets you write or draw on
the projection surface. The software also provides advanced tools for saving and
editing your annotations and creating interactive presentations.
1. Insert the TeamBoard Draw Annotation & Presentation Software CD in your
computer.
Windows: If you see the AutoPlay window, click Run DrawSASetup.exe. If
you see a User Account Control screen, click Continue or Yes.
Mac OS: Open the TeamBoard CD, then select Draw_SA.pkg.
2. Follow the on-screen instructions to install the software.
Note:
You can also visit the following website to download the Easy Interactive Driver,
manuals, and TeamBoard Draw:
www.epson.com/support/brightlinkdownloads (U.S.)
www.epson.ca/support/brightlinkdownloads (Canada)
Installing the Pen Batteries
Make sure the pen batteries are installed. To check the batteries, press the button.
If the indicator light is green, the batteries have enough power.
It’s a good idea to attach a commercially-available cord or lanyard to the pens.
If you need to install or replace the batteries, use either the two rechargeable AAA
batteries that came with the projector or two alkaline AAA batteries. Do not mix
the two battery types.
Installing the Remote Control Batteries 9
1. Press in the tab on the battery cover as you lift the cover off.
2. Install two batteries, inserting the +and –ends as shown.
3. Replace the battery cover and press it down until it clicks into place.
Installing the Remote Control Batteries
Make sure the remote control batteries are installed. If you need to install or
replace them, use 2 AA alkaline batteries.
1. Press in on the catch on the battery cover as you lift the cover off.
10 Getting Started
2. Install two batteries, inserting the +and –ends as shown.
3. Replace the battery cover and press it down until it clicks into place.
Connecting the Cables
You can connect the projector to any computer that has a standard monitor out
port using the VGA computer cable that came with the projector.
In addition, you must connect the USB cable before you can use the interactive
pens. If the cable is not long enough to reach your computer, you may need to use
a USB booster cable (not included).
You can also project through the USB port (USB display) or through a network.
However, the VGA monitor out port on your computer provides the best
performance when used with the interactive pens.
VGA computer cable USB cable
Altri manuali per BrightLink 455Wi
13
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali Epson Proiettore
Epson
Epson EB-5535U Manuale utente
Epson
Epson PowerLite 9300i Scheda tecnica
Epson
Epson 8100i - PowerLite XGA LCD Projector Manuale utente
Epson
Epson EMP-S3 Manuale utente
Epson
Epson EB-1925W Manuale utente
Epson
Epson PowerLite Pro G5450WUNL Manuale del sistema
Epson
Epson MovieMate 55 Manuale utente
Epson
Epson 1710C - PowerLite XGA LCD Projector Manuale utente
Epson
Epson EMP-TW 700 Manuale utente
Epson
Epson MovieMate 30s Manuale utente
Epson
Epson Home Cinema 760HD Scheda tecnica
Epson
Epson EMP-713 Manuale utente
Epson
Epson EB-1720 Manuale utente
Epson
Epson EH-LS300W Manuale utente
Epson
Epson BrightLink 475Wi Manuale utente
Epson
Epson EX71 Manuale utente
Epson
Epson 822p/83c Manuale utente
Epson
Epson PowerLite 1830 Manuale utente
Epson
Epson PowerLite 1720 Manuale utente
Epson
Epson PowerLite Home 10 Manuale utente
