Epson PowerLite 84 Manuale del sistema

Altri manuali per PowerLite 84

4

Indice

Altri manuali Epson Proiettore

Epson

Epson EMP 600 - SVGA LCD Projector Manuale utente

Epson

Epson PowerLite D6150 Manuale del sistema

Epson

Epson CO-W01 Scheda tecnica

Epson

Epson EX70 Manuale utente

Epson

Epson EB-X92 Manuale utente

Epson

Epson 7800p - PowerLite XGA LCD Projector Scheda tecnica

Epson

Epson EB-420 guide Manuale utente

Epson

Epson EMP-835 Manuale utente

Epson

Epson PowerLite Home Cinema 500 Scheda tecnica

Epson

Epson MOVIEMATE 72 Manuale utente

Epson

Epson PowerLite 9300i Scheda tecnica

Epson

Epson EF12 Manuale utente

Epson

Epson AP-60 - Projector Sound Solution Dimensioni

Epson

Epson PowerLite 1915 Istruzioni di installazione e manutenzione

Epson

Epson PowerLite Pro G6550WU Manuale utente

Epson

Epson BrightLink 475Wi Manuale utente

Epson

Epson PowerLite 811p Dimensioni

Epson

Epson EB-W16 Manuale utente

Epson

Epson EB-1965 Manuale utente

Epson

Epson 1705C - PowerLite XGA LCD Projector Manuale di istruzioni e di sicurezza

Epson

Epson EX90 Manuale utente

Epson

Epson EMP-X3 Manuale utente

Epson

Epson EMP-715 - XGA LCD Projector Manuale utente

Epson

Epson EX3212 Manuale utente

Manuali Proiettore popolari di altre marche

iEmmet

iEmmet MP-312 Manuale utente

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuale utente

Sony

Sony VPL-HW65ES Manuale di servizio

Toshiba

Toshiba TLP-791U Manuale utente

Philips

Philips LC1341 Guida di riferimento

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuale utente

NEC

NEC NP600S EDU Manuale utente

BenQ

BenQ SH753P Manuale utente

Eiki

Eiki EK-623U series Manuale utente

Christie

Christie LHD700 Manuale utente

Navitar

Navitar FX Manuale utente

InFocus

InFocus LitePro 560 Manuale utente

Sony

Sony SRX-R815P Manuale utente

Vivitar

Vivitar DP1500 X Manuale utente

Acer

Acer C20 Series Manuale utente

Asus

Asus ZenBeam Latte Manuale utente

BOXLIGHT

BOXLIGHT CP-322i/CP-634i Manuale utente

JVC

JVC 1108TTH-AO-AO Manuale utente

INSTALLATIONHANDBOOK

Lamp and Status Information

Epson PowerLite 84

Replacing the Lamp

The life span of the projection lamp is about 5000 hours if

BrightnessControlin the Setting menu is set to High (default), and

6000 hours if BrightnessControlis set toLow.

It is time to replace the lamp when:

The projected image gets darker or starts to deteriorate.

The message Replace the lamp appears on the screen when the

lamp comes on and the lamp warning light ashes orange. To

maintain projector brightness and image quality, replace the lamp

as soon as possible.

The lamp warning light ashes red (the lamp is burnt out).

Contact your dealer or call Epson at 800-GO-EPSON

(800-463-7766). Request part number V13H010L50.

Replacing the Lamp

1. Turn o the projector.

2. When the Ppower light stops ashing, unplug the power cord.

3. Let the projector cool for at least an hour (if it has been on). The

lamp is extremely hot immediately after use.

4. Loosen the lamp cover screw (you can’t remove it). Then slide the

lamp cover and lift it o of the projector.

INSTALLATION HANDBOOK

Lamp and Status Information

Epson PowerLite 84

5. Loosen the two screws holding the lamp in place (you can’t

remove them).

Loosen, but don’t

remove these screws

6. Hold the lamp as shown and pull it straight out.

7. Gently insert the new lamp. (If it doesn’t easily, make sure it is

facing the right way.)

8. Push down the side marked PUSH until it snaps in.

note

The lamp(s) in this

product contain mercury.

Please consult your state and

local regulations regarding

disposal or recycling. Do not

put in the trash.

INSTALLATION HANDBOOK

Lamp and Status Information

Epson PowerLite 84

9. Once the lamp is fully inserted, tighten its screws.

10. Replace the lamp cover, then tighten its screw.

11. Reset the lamp timer as described page.

Resetting the Lamp Timer

After you replace the lamp, you need to reset the lamp timer using the

projector’s menus.

1. Press the

Menubutton on the remote control or on the

projector’s control panel. You see the main menu.

2. Use the buttons on the remote control (or the arrow buttons

on the projector) to highlight Reset, then press Enter.

You see this screen:

3. Select

Reset Lamp Hoursand press Enter.

4. When you see the prompt, select Yes and press Enter.

5. When you’re nished, press Esc or Menuto exit the Menu

system.