Equinox Systems Blitzer Strobe Manuale utente

Order code: EQLED366

Blitzer Strobe

User Manual

www.prolight.co.uk Blitzer Strobe User Manual 2

Safety advice

WARNING

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL

CAREFULLY BEFORE YOUR INITIAL START-UP!

• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.

• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.

• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessary

fortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.

• Pleasenotethatdamagescausedbyusermodicationstothisequipmentarenotsubjecttowarranty.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance

of this manual or any unauthorised modication to the equipment.

OPERATING DETERMINATIONS

Ifthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageand

thewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.

Donotendangeryourownsafetyandthesafetyofothers!

Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.

CAUTION!

KEEP THIS EQUIPMENT

AWAY FROM RAIN,

MOISTURE AND LIQUIDS

CAUTION!

TAKE CARE USING

THIS EQUIPMENT!

HIGH VOLTAGE-RISK

OF ELECTRIC SHOCK!!

• Neverletthepowercablecomeintocontactwithother

cables.Handlethepowercableandallmainsvoltage

connectionswithparticularcaution!

• Neverremovewarningorinformativelabelsfromtheunit.

• Donotopentheequipmentanddonotmodifytheunit.

• Donotconnectthisequipmenttoadimmerpack.

• Donotswitchtheequipmentonandoffinshortintervals,

asthiswillreducethesystem’slife.

• Onlyusetheequipmentindoors.

• Donotexposetoammablesources,liquidsorgases.

• Alwaysdisconnectthepowerfromthemainswhen

equipmentisnotinuseorbeforecleaning!Onlyhandle

thepower-cablebytheplug.Neverpullouttheplugby

pullingthepower-cable.

• Makesurethattheavailablemainssupplyvoltageis

between100~240VAC,50/60Hz.

• Makesurethatthepowercableisnevercrimpedor

damaged.Checktheequipmentandthepowercable

periodically.

• Iftheequipmentisdroppedordamaged,disconnectthe

mainspowersupplyimmediatelyandhaveaqualied

engineerinspecttheequipmentbeforeoperatingagain.



• Iftheequipmenthasbeenexposedtodrastic

temperatureuctuation(e.g.aftertransportation),

donotconnectpowerorswitchitonimmediately.

Thearisingcondensationmightdamagetheequipment.

Leavetheequipmentswitchedoffuntilithasreached

roomtemperature.

• Ifyourproductfailstofunctioncorrectly,stopuse

immediately.Packtheunitsecurely(preferablyinthe

originalpackingmaterial),andreturnittoyourProLight

dealerforservice.

• Onlyusefusesofsametypeandrating.

• Repairs,servicingandpowerconnectionmustonlybe

carriedoutbyaqualiedtechnician.THISUNITCONTAINS

NOUSERSERVICEABLEPARTS.

• Thislightingxtureisforprofessionaluseonly-itis

notdesignedfororsuitableforhouseholduse.The

productmustbeinstalledbyaqualiedtechnicianin

accordancewithlocalterritoryregulations.Thesafetyof

theinstallationistheresponsibilityoftheinstaller.The

xturepresentsrisksofsevereinjuryordeathduetore

hazards,electricshockandfalls.

• Warning!RiskGroup2LEDproductaccordingto

EN62471.Donotviewthelightoutputwithoptical

instrumentsoranydevicethatmayconcentratethebeam.

• WARRANTY:Oneyearfromdateofpurchase.

www.prolight.co.uk Blitzer Strobe User Manual 3

Product overview & technical specications

TheBlitzersarecompactall-in-onestrobe,blinderandwashlights,equippedwith132SMDLEDsandan80°

beamangleallenclosedinarobustmetalhousingwithmountingbracket.TheDMXmodesfeaturecontrolover

dimmer,ashspeedandduration.Master/slave,soundactiveandstandalonemodesalsoaddtothemultitude

offeatures.

• 132white5050SMDLEDs(6500K)

• Beamangle:80°

• DMXchannels:1/2/3-1or3-2selectable

• Auto,soundactiveandmaster/slave

modes

• 0-100%dimmingandvariablestrobe

• Suppliedwithhangingbracket

• 4pushbuttonmenuwithLEDdisplay

• IECpowerinput

• 3-PinXLRinput/output

• Convectioncooled

Blitzer Strobe

Specications

Powerconsumption 30W

Powersupply 100~240V,50/60Hz

Fuse F2A250V

Dimensions 120x345x75mm

Weight 1.35kg

Ordercodes EQLED366

120mm

345mm 75mm

www.prolight.co.uk Blitzer Strobe User Manual 4

Technical specications

DMX INPUTMIC DMX OUTPUT

POWER INPUT:

100-240V~50/60Hz

FUSE: F2A 250V

POWER CONSUMPTION: 30W

MENU DOWNUP ENTER

BLITZER

www.prolight.co.uk

11 04

07 08 03 02 05 06

090110

01-Earthpoint

02-LEDdisplay

03-Functionbuttons

04-Microphone

05-DMXinputsocket

06-DMXoutputsocket

07-IECpowerinputsocket

08-FuseF2A250V

09-Hangingbracket

10-Hangingbracket

adjustmentknob

11-Safetyeye

Inthebox:1 x xture,

1 x power cable,

& 1 x user manual

www.prolight.co.uk Blitzer Strobe User Manual 5

Operating instructionsOperating instructions

A 0 0 1

A 5 1 2

A 0 0 1

DMX address setting

A U 0 0

A U 9 9

A U 7 O

Auto mode

S L A U

Slave mode

S 0 0 0

S 0 9 9

S O U N

Sound active

C 1 0 0

C 1 9 9

C F 0 0

C F 9 9

C 0 0 0

Strobe mode

F A 0 0

F A 9 9

F F 0 0

F F 9 9

F A 0 0

Fade mode

1Ch

2Ch

3 C h 1

3 C h 2

C h

DMX channel setting

www.prolight.co.uk Blitzer Strobe User Manual 6

DMX mode:

OperatinginaDMXcontrolmodeenvironmentgivestheuserthegreatestexibilitywhenitcomes

tocustomisingorcreatingashow.Inthismodeyouwillbeabletocontroleachindividualtraitof

thextureandeachxtureindependently.

ToaccesstheDMXaddressmode,pressthe“MENU”buttononthefrontoftheunittoshowA001

ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosetthe

requiredDMXaddress.Pressthe“ENTER”buttontoconrmthesetting. Toexitoutofanyoftheabove

options,pressthe“MENU”button.

DMX channel mode:

ToaccesstheDMXchannelmode,pressthe“MENU”buttononthefrontoftheunittoshowChonthe

LEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochooseoneofthe

1/2/3-1or3-2DMXchannelmodes.Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.



Operating instructions

PLEASE NOTE:WhentheunitisreceivingDMXtherstreddotonthedisplaywillash.

2 channel mode:

Channel Value Function

CH1 000-255 Masterdimmer(0-100%)

CH2

000-005 Nofunction

006-010 Blackout

011-250 Strobe(slow-fast)

251-255 Nofunction

3 channel mode 1:

Channel Value Function

CH1 000-255 Masterdimmer(0-100%)

CH2

000-005 Nofunction

006-010 Blackout

011-250 Strobe(slow-fast)

251-255 Nofunction

CH3 000-255 Flashduration(slow-fast)

3 channel mode 2:

Channel Value Function

CH1 000-255 Masterdimmer(0-100%)

CH2

000-005 Nofunction

006-010 Blackout

011-033 Strobepulse(slow-fast)

034-056 Stroberampup(slow-fast)

057-079 Stroberampdown(slow-fast)

080-102 Stroberandom(slow-fast)

103-127 Strobe(shortash)

128-250 Strobe(slow-fast)

251-255 Nofunction

CH3 000-005 SoundactiveOFF

006-255 SoundactiveON(senslow-high)

1 channel mode:

Channel Value Function

CH1 000-010 Nofunction

011-255 Strobe(slow-fast)

www.prolight.co.uk Blitzer Strobe User Manual 7

Operating instructions

Master/slave mode:

Tosetthemasterunit,selectyourdesiredprogram(soundactive,auto,strobeorfademodes).

Tosettheotherunitsinslavemode,pressthe“MENU”buttononthefrontoftheunittoshowSLAU

ontheLEDdisplay.Pressthe“ENTER”buttontoconrmthesetting.Theunitwillnowruninsequence

withthemasterunit.Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

PleaseensurethatallslaveunitsaresettothesameDMXchannelmodeasthemasterunit.

Strobe mode:

Toaccessthestrobemode,pressthe“MENU”buttononthefrontoftheunittoshowC000onthe

LEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochooseC1.00.

Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstoselectthebrightnessbetween

00~99.Value: 00 - 99 (00 = low, 99 = high). Nowpressthe“ENTER”buttonandusethe“UP”and

“DOWN”buttonstochooseCF.00.Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttons

toselectthestrobespeedbetween00~99.Pressthe“ENTER”buttontoconrmthesetting. 

Value: 00 - 99 (00 = slow, 99 = fast). Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Fade mode:

Toaccessthefademode,pressthe“MENU”buttononthefrontoftheunittoshowFA00ontheLED

display.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochooseFA.00.

Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstoselectthefadespeedbetween

00~99.Value: 00 - 99 (00 = slow, 99 = fast). Nowpressthe“ENTER”buttonandusethe“UP”and

“DOWN”buttonstochooseFF.00.Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttons

toselectthestrobespeedbetween00~99.Pressthe“ENTER”buttontoconrmthesetting. 

Value: 00 - 99 (00 = slow, 99 = fast). Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Auto mode:

Toaccesstheautomode,pressthe“MENU”buttononthefrontoftheunittoshowAUTOonthe

LEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstoselecttheauto

programspeedbetween00~99.Pressthe“ENTER”buttontoconrmthesetting. 

Value: 00 - 99 (00 = slow, 99 = fast). Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Sound/sound sensitivity:

Toaccessthesoundmode,pressthe“MENU”buttononthefrontoftheunittoshowSOUNonthe

LEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstoselectthesound

sensitivitybetween00~99.Pressthe“ENTER”buttontoconrmthesetting. 

Value: 00 - 99 (00 = low, 99 = high). Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

www.prolight.co.uk Blitzer Strobe User Manual 8

Setting the DMX address:

TheDMXmodeenablestheuseofauniversalDMXcontroller.Eachxturerequiresa“startaddress”

from1-512.Axturerequiringoneormorechannelsforcontrolbeginstoreadthedataonthechannel

indicatedbythestartaddress.Forexample,axturethatoccupiesoruses7channelsofDMXandwas

addressedtostartonDMXchannel100,wouldreaddatafromchannels:100,101,102,103,104,105

and106.Chooseastartaddresssothatthechannelsuseddonotoverlap.E.g.thenextunitinthe

chainstartsat107.

DMX 512:

DMX(DigitalMultiplex)isauniversalprotocolusedasaformofcommunicationbetweenintelligent

xturesandcontrollers.ADMXcontrollersendsDMXdatainstructionsformthecontrollertothexture.

DMXdataissentasserialdatathattravelsfromxturetoxtureviatheDATA“IN”andDATA“OUT”

XLRterminalslocatedonallDMXxtures(mostcontrollersonlyhaveadata“out”terminal).

DMX linking:

DMXisalanguageallowingallmakesandmodelsofdifferentmanufacturestobelinkedtogether

andoperatefromasinglecontroller,aslongasallxturesandthecontrollerareDMXcompliant.

ToensureproperDMXdatatransmission,whenusingseveralDMXxturestrytousetheshortest

cablepathpossible.TheorderinwhichxturesareconnectedinaDMXlinedoesnotinuencethe

DMXaddressing.Forexample;axtureassignedtoaDMXaddressof1maybeplacedanywherein

aDMXline,atthebeginning,attheend,oranywhereinthemiddle.Whenaxtureisassigneda

DMXaddressof1,theDMXcontrollerknowstosendDATAassignedtoaddress1tothatunit,

nomatterwhereitislocatedintheDMXchain.

DATA cable (DMX cable) requirements (for DMX operation):

ThisxturecanbecontrolledviaDMX-512protocol.TheDMXaddressissetonthebackoftheunit.

YourunitandyourDMXcontrollerrequireastandard3-pinXLRconnectorfordatainput/output,

seeimagebelow.

Also remember that DMX cable must be daisy chained and cannot be split.

DMX setup

FurtherDMXcablescanbe

purchasedfromallgoodsound

andlightingsuppliersor

ProLightConceptsdealers.

Pleasequote:

CABL10 – 2m

CABL11 – 5m

CABL12 – 10m

www.prolight.co.uk Blitzer Strobe User Manual 9

Notice:

Besuretofollowthediagramsbelowwhenmakingyourowncables.Donotconnectthecables

shieldconductortothegroundlugorallowtheshieldconductortocomeincontactwiththeXLRs

outercasing.Groundingtheshieldcouldcauseashortcircuitanderraticbehaviour.

Special note:

Line termination:

Whenlongerrunsofcableareused,

youmayneedtouseaterminatoron

thelastunittoavoiderraticbehaviour.

Using a cable terminator will decrease

the possibilities of erratic behaviour.

(3-pin - Order ref: CABL90, 5-pin - Order ref: CABL89)

5-pin XLR DMX connectors:

Somemanufacturesuse5-pinXLRconnectorsfordatatransmissioninplaceof3-pin.5-pinXLRxtures

maybeimplementedina3-pinXLRDMXline.Wheninsertingstandard5-pinXLRconnectorsintoa

3-pinlineacableadaptormustbeused.Thediagrambelowdetailsthecorrectcableconversion.

Terminationreducessignaltransmission

problemsandinterference.itisalways

advisabletoconnectaDMXterminal,

(resistance120Ohm1/4W)betweenpin2

(DMX-)andpin3(DMX+)ofthelastxture.

5-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

Pin 4: N/C

Pin 5: N/C

3-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

3-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

5-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

Pin 4: N/C

Pin 5: N/C

DMX setup

www.prolight.co.uk Blitzer Strobe User Manual 10

WEEE notice

Correct Disposal of this Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries

with separate collection systems)

Thismarkingshownontheproductoritsliterature,indicatesthatitshouldnotbedisposedof

withotherhouseholdwastesattheendofitsworkinglife.Topreventpossibleharmtothe

environmentorhumanhealthfromuncontrolledwastedisposal,pleaseseparatethisfromother

typesofwastesandrecycleitresponsiblytopromotethesustainablereuseofmaterialresources.

Householdusersshouldcontacteithertheretailerwheretheypurchasedthisproduct,ortheir

localgovernmentofce,fordetailsofwhereandhowtheycantakethisitemforenvironmentally

saferecycling.

Businessusersshouldcontacttheirsupplierandcheckthetermsandconditionsofthe

purchasecontract.Thisproductshouldnotbemixedwithothercommercialwastesfordisposal.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Equinox Systems Attrezzatura per DJ

Equinox Systems

Equinox Systems Kaleido XP Manuale utente

Equinox Systems

Equinox Systems PFM1500 Manuale utente

Equinox Systems

Equinox Systems SpectraPix Batten Manuale utente

Equinox Systems

Equinox Systems 2M Flight CasedDMX LED Flame Machine Manuale utente

Equinox Systems

Equinox Systems Domin8R II Manuale utente

Equinox Systems

Equinox Systems EQLED53 Manuale utente

Equinox Systems

Equinox Systems Pulse Tube Lithium Manuale utente

Equinox Systems

Equinox Systems EQLED162 Manuale di installazione e funzionamento

Equinox Systems

Equinox Systems Power Par 54 MKII Manuale utente

Equinox Systems

Equinox Systems Triton Beam EQLED071 Manuale utente

Equinox Systems

Equinox Systems Twin Shot MKII Electric Confetti Launcher Manuale utente

Equinox Systems

Equinox Systems Flame Machine 1.5M Manuale utente

Equinox Systems

Equinox Systems Crossfire XP Manuale utente

Equinox Systems

Equinox Systems C-Shot Manuale utente

Equinox Systems

Equinox Systems Midas Spot Manuale utente

Equinox Systems

Equinox Systems EQLED082 Manuale utente

Equinox Systems

Equinox Systems Fusion 50 MKIII Manuale utente

Equinox Systems

Equinox Systems EQLED054 Manuale utente

Equinox Systems

Equinox Systems FXbar18 Manuale utente

Equinox Systems

Equinox Systems Stratos Duo RGB Manuale utente

Equinox Systems

Equinox Systems Quad Pix Batten Manuale utente

Equinox Systems

Equinox Systems CARBON Manuale utente

Equinox Systems

Equinox Systems Micro Batt EQLED160 Manuale utente

Equinox Systems

Equinox Systems Hot Rod EQLED089 Manuale utente

Manuali Attrezzatura per DJ popolari di altre marche

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuale del proprietario

Chauvet

Chauvet OVATION E-930VW Manuale utente

Zumtobel

Zumtobel APHRODITE Home Manuale utente

Snow Masters

Snow Masters Zig Oscillator Manuale utente

EuroLite

EuroLite 50530554 Manuale utente

Beamz

Beamz BUV243 Manuale utente

thomann

thomann Stairville DJ Lase 40-G MK-III Manuale utente

Eagletone

Eagletone 6 Eyes Flower Manuale utente

EuroLite

EuroLite FLD-1508 Manuale utente

Technical Pro

Technical Pro LG8xSEA Manuale utente

JB Systems

JB Systems Lounge Laser DMX Manuale utente

Lightmaxx

Lightmaxx Vega Halo 90 Manuale utente

Elation

Elation FUZE WASH Z350 Manuale utente

Maverick

Maverick MK3 WASH Manuale utente

Infinity

Infinity TF-260C7 Fresnel Manuale utente

Chauvet

Chauvet EVE E-50Z Manuale utente

Eliminator Lighting

Eliminator Lighting E 138 Manuale utente

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuale utente