Equip 128575 Manuale utente
USB 2.0
DOCKING STATION
Universal | 128575
1
1. Introduction
equip USB 2.0 Docking Station is a perfect solution for PC or Notebook to
increase the available I/O ports. With only one USB port required from PC or
Notebook computer, such devices as Hub, card reader, LAN, PS/2, Microphone,
Speaker, RS-232 and eSATA peripheral can be accessed and operated freely via
the Docking Station.
1.1 Features
Supports USB High-Speed and Full-Speed operation
Built-in 53 in 1 multiple card reader and 4x USB Hub
1x Fast Ethernet LAN port and microphone/speaker audio ports
PS/2 keyboard/mouse interface and 1x RS-232/eSATA port
1.2 Package Contents
1x Docking Station
1x Stand
1x USB Cable
1x Driver Disc
1x Power Adapter
1.3 Supported Operating System
Operating
System
Hub, PS/2
Card Reader
10/100Mbps
Fast Ethernet
RS-232 eSATA Audio
Windows 98SE
Support* Support* Support* Support* N/A**
Windows ME Support
Support* Support* Support
N/A**
Windows 2000
Support
Support* Support* Support
Support
Windows XP Support
Support* Support* Support
Support
Windows Vista
Support
Support* Support* Support
Support
Windows 7 Support
Support* Support* Support
Support
Mac OS 10.4.x
Support
Support Support* Support
Support
Mac OS 10.5.x
Support
Support Support* Support
Support
Mac OS 10.6.x
Support
Support Support* Support
Support
* Need to install driver; the drivers are provided within the accompanied CD.
** USB Audio port does not support under Windows 98SE/ME.
2
3
1.4 Specifications
Model 128575
Computer Connection USB 1.1 or USB 2.0 Port
53 in 1 Card Reader
Audio (Mic/Speaker)
4x USB 2.0 Hub
10/100Mbps Fast Ethernet
PS/2 (Keyboard/Mouse)
Expansion Interfaces
RS-232 (DB9 Male)
LEDs Red/Green
Red – Power ON
Green – Memory Card Inserted
Green Flashing – Read/Write files
from/into Memory Card
Power Supply AC Input 100 V~240V
DC Output 5V, 2.0A
Safety Certificate CE, FCC
TUV/GS (Power Adapter)
Operating Temp. 0-40°C
Storage Temp. -10-60°C
Environment
Humidity 0-80% RH, Non-condensing
Housing Plastic & Aluminum
Weight 280g (device only)
Physical
Properties Dimensions (W x D x H) 120 x 135 x 37 mm
4
1.4.1 Memory Cards Supported List
MS Slot: Capacity
Supported
Memory Stick (MS), MS MagicGate (MG), MS Pro/MG, MS Pro
Extreme/III, MS Pro Ultra II, HS MS Pro/MG MS ROM, MS Select,
MS Duo/MG, MS Pro Duo/MG, HS MS Pro Duo/MG, M2*
Up to MS-4G
CF/MD Slot:
CF I/II, CF Extreme/III, CF Ultra/II, CF Pro/II, CF Elite Pro, High Speed
CF, XS-XS CF, IBM Microdrive (MD), Hitachi MD, Magicstor MD Up to CF-8G
SMC Slot:
Smart Media Card (SM), SM ROM Up to SMC-32MB
SD/MMC Slot:
Secure Digital Card (SD), SD Extreme/III, SD Ultra/II/X/Speed, SD
Pro, SD Elite Pro, HS SD, HS/Mini SD*, Micro SD, Multi Media
Card(MMC), MMC 4.0*, HS MMC, RS MMC/4.0*, HS RS MMC*,
DV-RS MMC*, MMC Micro*, T-Flash*
Up to MMC-
512MB
Up to SD-4G
Up to SDHC-8G
MS Slot:
Memory Stick (MS), MS MagicGate (MG), MS Pro/MG, MS Pro
Extreme/III, MS Pro Ultra II, HS MS Pro/MG MS ROM, MS Select,
MS Duo/MG, MS Pro Duo/MG, HS MS Pro Duo/MG, M2*
Up to MS-4G
* Need Adapter
5
2. Hardware Installation
Connect power adapter to a household AC outlet and plug the adapter’s DC
jack into the DC socket on the side of docking station.
Plug the flat end (USB Type A) of the USB cable into a free USB port on the
laptop or desktop computer.
Plug the square end (USB Type B) of the USB cable into the USB upstream
connector located on the side of docking station.
At this point, Windows system will automatically find the docking station and
start installing its drivers. Windows system will prompt you to act along the
driver installation process. See the next section for details on how to install
the drivers.
3. Software Installation
Please make sure your laptop or desktop computer is powered ON properly and
the docking station is also powered and connected to the laptop/desktop
Computer’s USB port with a USB 2.0 cable (included in the package). The
computer will start the enumeration (driver installation) process automatically. If
this is the first time that the docking station connected to the computer, the
computer system will proceed to install all the required drivers. It will prompt
user to take some action if needed.
The driver installation process is only needed for the very first time of connecting
docking station to the laptop/desktop computer and will be briefly introduced in
this section.
Below installation processes is for Windows XP; for Windows 98SE/ME/2000/7,
the processes are similar, please follow the prompts on screen and finish the
Installation
Note: Please make sure the driver CD is placed in the CD-ROM drive before
Proceed.
6
7
Software Installation under Windows XP environment:
There are two drivers that need to install from the driver disc,
(1). USB to Ethernet (2) USB to Serial
The drivers of other I/O interfaces are provided by Windows XP and will be
installed automatically.
Choose “Install from a list or specific location (Advanced)”
Click “Next” to continue
8
Click “Browse” to specific the driver location; click ”Next” to continue
Click ”OK” when driver location is confirmed
9
Click “Finish” to close the installation wizard of USB to Ethernet
Choose “Install from a list or specific location (Advanced)”
Click “Next” to continue
Altri manuali per 128575
1
Indice
Lingue:
Altri manuali Equip Stazione di attracco
