ERA EASYHOME E3000 Manuale utente
Wireless
Video Door Intercom
E3000
Instruction Manual
Customer Helpline
0345 257 2500
SMART HOME SECURITY
Prior To Use
Important Information
PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATING THE SYSTEM AND RETAIN FOR
FUTURE REFERENCE.
Any repairs must be carried out by an ERA Authorised Repair Centre. Misuse or attempted repairs to any
component part of this product will invalidate the warranty.
The photocopying, copying, reproduction, translation to any language, modification, storage in a
retrieval system or retransmission, in whole or in part, in any form or by any means, electronic,
mechanical or otherwise of this manual, Is strictly prohibited without the prior written permission of ERA
Home Security.
n Safety Precautions
1. Follow all warning symbols as marked on the product parts.
2. Avoid spilling liquid on the video handset or base station.
3. Unplug this product from the wall outlet before cleaning, then use a damp cloth to wipe. Do
not use liquid or aerosol cleaners.
4. Do not place objects on the power supply line cord that may cause damage.
5. In the event of the product developing a fault refer servicing to an ERA Approved Repair
Centre only.
6. Pay attention to the polarity of the batteries, insert batteries in accordance with polarity
symbols (this instruction is found in the ‘installing batteries’ section.)
7. Use only the rechargeable batteries supplied/as indicated in the Instruction Manual.
8. Do not mix exhausted batteries with full batteries. Exhausted batteries must be disposed of in
a responsible manner.
9. If the video handset is not to be used for a long period of time, remove the batteries to
prevent possible leakage.
10. Use only the power supply indicated in the Instruction Manual.
Features........................................................................1
Kit Contents.................................................................2
Product Diagrams .......................................................3
Battery Installation & Power.....................................4
Outdoor Camera Connection Diagrams ...................6
Outdoor Camera Installation.....................................7
Settings ........................................................................8
Setup.. ........................................................................16
Operation...................................................................18
Technical Specification.............................................20
Additional Accessories .............................................21
Notes .........................................................................22
Disposal & Recycling ...............................................22
Guarantee .................................................................23
Content
Features
-1-
Battery operated (requires 2 x C Cell Batteries, not included)
Power supply option (requires DC 12V Power Adapter, not included)
IP55 rated
8 LEDs for night vision
Video resolution: 320 x 240, 15 frames per second
Wide angle lens - 120 viewing angle
Auto Snap feature – stores up to 100 snaps
Backlit call button (doorbell)
Talk with the person at the Video Handset
Monitoring feature
Tamper protected
Up to 215 metre operating range in clear line of sight. Supports up to 2 outdoor
cameras and 2 video handsets.
Wireless Outdoor Camera/intercom/doorbell
2.4" TFT LCD display
Adjustable brightness and talk volume
See, hear and talk with the visitor at your door
Monitoring feature
Wireless Indoor Video Handset
Outdoor Camera
Package Content
Kit Contents
Bracket
Battery Cover Cable Cover
Screws
Lithium Battery Power Adapter
(12V, 500mA)
-2-
Instruction Manual
Outdoor Camera/Intercom/Doorbell
Video Handset Charger Base
Portable Video Handset
Wir ele ss
Vid eo Door I nterc om
E3000
Ins truct ion Man ual
Cus tomer H elpli ne
034 5 257 250 0
SMART H OME SE CURI TY
When unpacking your product please check that all parts are present, as shown in
the parts list below. If you have any queries regarding your purchase please
contact our Customer Support Helpline, prior to installation and set-up.
Product Diagrams
Outdoor Camera
LED Lights
Sensor Light
Speaker
Microphone
Call Button
Camera
Video Handset
Charger
Charge Pins
-3-
LCD Display
Navigation Key
Right Soft Key
Monitor/ Snapshot
Power/ End Key
Left Soft Key
Unlock Key/
Charger LED
Accept Key
Microphone
Speaker
Battery
Compartment
Cover
Charging Pins
Battery Installation & Power
-4-
1.
Lithium battery
Battery case
Battery compartment cover 2
1
Protective cover
Video Handset Battery Installation:
Fit the rechargeable lithium battery (3.7V,1100mA) supplied,as follows:
1. Remove the battery compartment cover by pushing down on the raised arrow
and sliding the cover in a downward direction.
2. Remove the battery’s protective film and insert the battery into the battery
compartment, taking care to correctly match the polarity (+, -).
3. Replace the battery cover by sliding it upwards until it snaps in place.
Notes:
1. Should the battery not reach its full storage capacity after recharging,
replace with a new battery.
2. When replacing the battery use only an equivalent lithium battery.
Do NOT use any other battery type.
The status of the Handset battery is shown in the top right-hand corner of the
screen when in Standby Mode.
screw
battery cover
battery
-5-
Outdoor Camera Battery Installation:
1. Fit two 'C' Size 1.5V batteries (not supplied) into the battery compartment.
2. Fix the battery cover in place using the four screws provided.
The status of the Outdoor Camera batteries is shown in the top left-hand corner of
the screen when in Monitoring Mode and during a call.
Charging the Video Handset:
Connect the modular end of the AC power adapter to the power jack of the charger,
then plug the AC adapter into a suitable mains socket. Fully charge the handset
prior to initial operation (approx. 5 hours).
Note: When the handset is charging, the 'Unlock' button will be illuminated.
Diagram
-6-
Note: The outdoor camera can be either battery powered or mains powered by
a compatible AC Adapter (not supplied). Do not use both batteries and an AC
Adapter at the same time. The call button backlight is only available when the
outdoor camera is mains powered.
Connecting the Outdoor Camera to a Power Supply and/or
Unlock Module (optional accessories)
Connection Mode 1
Normally 'Open'
DC Power Supply
EX-BUT
DC9-12V
NO
COM
NC
GND
DC9-12V Lock
Connection Mode 2
Normally 'Closed'
GND
Normally
open lock
+
+-
-
DC power
for Lock
Maximum relay output
current 1A
EX-BUT
Lock
Normally
closed lock
+
--
+
Outdoor Camera
Outdoor Camera
DC power
for Lock
DC9-12V
NO
COM
NC
GND
GND
DC9-12V
DC Power Supply Maximum relay output
current 1A
-7-
Installation
Outdoor Camera Installation:
Outdoor camera
Bracket
Wall plug
Anti-tamper screw
Installation screws
96
72
After wiring a Power Supply and/or Unlock Module (not included) to the connection
terminal, tension the cable. Fit the cable cover over the connection terminal with the
four screws supplied.
Cable cover
Cable
When locating the outdoor camera, position the camera lens at an average 'head
height' . Fix the bracket to the wall with the screws supplied and locate the outdoor
camera onto the wall bracket. Finally fit the anti-tamper screw.
battery compartment cover
Altri manuali per EASYHOME E3000
2
Indice
Altri manuali ERA Sistema di interfono
