Wall fixing - if in dou t seek professional advice
Wood
If fixing to wood
make sure that it
isn’t chip oard as
screws can easily pull
away from the core
structure
Brick or Masonry
Use an appropriate
wall plug provided you
are sure your wall is
sound
Cavity wall
Special toggle
wall plugs are
needed. Seek
expert advice
1. To attach the shelving unit to the wall, use the racket and 2 pan head screws provided.
Screw the long end of the racket to the ottom of the desk in the middle, using the pre drilled pilot
holes provided.
The shorter end of the racket should face downwards and e flush with the top edge of the unit.
2. If you don’t need to use Rawl plugs in your wall, push the unit to the wall and screw the unit to the
wall through the slot on the racket.
3. If you do require rawl plugs for your wall. Push the unit to the wall and mark the wall
where
the slot on the racket comes. Take the shelving unit away from the wall.
Using screws suitable for your type of wall, see Wall fixings a ove. Drill a hole within
your mark of the racket slot, add rawl plug, place the unit ack up against the wall and screw it into
your wall.
Ercol Furniture Ltd, Summerleys Road, Princes Risborough, Buc s. HP27 9PX www.ercol.com
PLEASE REFER TO THE ERCOL CARE CARD ENCLOSED WITH YOUR FURNITURE.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
