ErGear EGDS9 Manuale utente
01
Product Features
C-Clamp
Mounting
Grommet
Mounting
01 02 03 04 05 06 07 08 09 1110
02
Warning!
Do not adjust tension without monitor.
1. Ensure monitor has been attached to the mount.
5HDG\RXUPRQLWRUER[RUPDQXDOWRƉQGRXWPRQLWRUQHWZHLJKW
3. Ensure the net weight of monitor (including accessories) is between
2.2~26.4 Ibs (1-12 kg).
Clockwise to reduce
tension(carry less weight)
Counter-clockwise to increase
tension(carry more weight)
TENSION ADJUSTMENT SHOULD BE DONE ONLY
AFTER MOUNT INSTALLATION
Adjustment Sign
01 02 03 04 05 06 07 08 09 1110
03
5/32 in.(4mm)
Medium Allen Key
M (x1)
Base
A (x1)
Grommet Plate
E (x1)
1/8 in.(3mm)
Small Allen Key
L (x1)
Arm
C (x2)
Arm Extension
B (x2)
Bottom Pad
G (x1)
Bolt
K (x4)
C-Clamp
J (x1)
Tools Needed (Not lncluded)
Supplied Parts and Hardware
Warning:This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. Do not use
damaged or defective parts.
• Please note: Not all hardware included in this package will be used.
Supplied Parts and Hardware for Step 1
Supplied Parts and Hardware for Step 2
Supplied Parts and Hardware for Step 3
Supplied Hardware for Step 4
13/64 in.(6mm)
Large Allen Key
N (x1)
13/64 in.(6mm)
Large Allen Key
N (x1)
C-Clamp Brace
I (x1)
Bottom Plate
F (x1)
Decorative Cover
H (x1)
Phillips Screwdriver Drill
Wood Drill
10-15mm (25/64 in.-19/32 in.)
Bolt
M4x12mm
F1 (x8)
Bolt
M4x16mm
F2 (x8)
5mm Spacer
F3 (x8)
Monitor Plate
D (x2)
D5 Washer
F4 (x8)
04
05
1. Install the Base
Warning:
Ensure bolts are
VHFXUHGƉUPO\.
A. For Clamp Mounting
1 31/32 in.-3 11/32 in.
50-85mm
19/32 in.-2 9/32 in.
15-58mm
K
I
A
M(Medium Allen Key)
(G)
G
15/64 in.(6mm)
M(Medium Allen Key)
JE
M
OR
01 02 03 04 05 06 07 08 09 1110
06
N (Large Allen Key)
Warning:
Ensure bolts are
VHFXUHGƉUPO\.
B. For Grommet Mounting
H
K
F
M(Medium Allen Key)
(G)
G
J
N (Large Allen Key) N (Large Allen Key)
E
10-15mm
25/64 in.-19/32 in.
10-15mm
25/64 in.-19/32 in.
01 02 03 04 05 06 07 08 09 1110
07
2. Install the Arms and Arm Extensions to Base
B
C
L (Small Allen Key)
L (Small Allen Key)L (Small Allen Key)
±135°±135°
±135°
±135°
01 02 03 04 05 06 07 08 09 1110
08
For Monitor with Curved or Recessed Back
For Monitor with Flat Back
Phillips
Screwdriver
[not included]
D
F1
F4
D
F2
F4
F3
3. Attach Monitors to the Arms
HEAVY! You may need
assistance with this step.
Note: If needed, pull the lock
plate back and lift the TV to
seperate the TV from the arm.
1
2
01 02 03 04 05 06 07 08 09 1110
09
4. Adjust Gas Spring Tension
Be sure to keep the arm in
horizontal position during
adjustment. Or else, it
ZRXOGEHGLƋFXOWWRDGMXVW
the mount or damage the
mount.
1. If the monitor can stay at the desired height by itself,
no adjustment needed.
2. If the monitor rises up, press the arm to keep it in
horizontal position and then use the Large Allen Key (N)
to turn the bolt clockwise(“-” direction) to reduce
tension of the arm only until the monitor can stay at the
desired height by itself.
3. If the monitor falls down, lift the arm to keep it in
horizontal position and then use the Large Allen Key (N)
to turn the bolt counter-clockwise(“+” direction) to
increase tension of the arm only until the monitor can
stay at the desired height by itself.
+
-
N (Large
Allen Key)
Desk
+
+
01 02 03 04 05 06 07 08 09 1110
Altri manuali per EGDS9
1
Indice
Altri manuali ErGear Rack e supporto
ErGear
ErGear EGESD1 Manuale utente
ErGear
ErGear EGCM1 Manuale utente
ErGear
ErGear EGDS6 Manuale utente
ErGear
ErGear EGCM6 Manuale utente
ErGear
ErGear EGDS2 Manuale utente
ErGear
ErGear EGSS2 Manuale utente
ErGear
ErGear EGSS3 Manuale utente
ErGear
ErGear EGTS5B Manuale utente
ErGear
ErGear EGCM12 Manuale utente
ErGear
ErGear EGSS7 Manuale utente
