Item no: 07455
Curb Ramp
To avoid personal injury and/or property damage, please read and follow
ALL instructions before assembling and operating.
1. Never overload ramps. Maximum capacity for your ramp is 750 lb. (Evenly distributed load).
2. Make sure the ramp is aligned with the wheels of the equipment being loaded or unloaded.
3. Always load or unload on a solid, level and stable surface
4. Use as a curb ramp use as intended
5. Ramp surfaces must be clean, dry and free from oil, grease or water.
6. Inspect ramp before each use. Do not attempt to use a ramp that is damaged in any way.
No modification, alteration, or deviation to the ramp are authorized by the manufacturer.
Proper care and maintenance of the ramp are essential to safety.
7. Proper use of this product is critical to safety, and beyond the control of Erickson Manufacturing
Ltd. Erickson Manufacturing Ltd. neither guarantees nor is liable for any damage resulting from
improper use.The liability of this product is limited to its purchase price if it proves to be defective
in material and/or workmanship.
Warranty
Warranty Qualifications
Effective from the day you purchase the product. Please keep your dated purchase invoice as proof.
Repair/Replacement Warranty
Erickson Manufacturing Ltd. warrants to the original purchaser that the mechanical components
will be free of defect in material and workmanship for 90 days from the original date of purchase.
Transportation charges on product submitted for repair or replacement under warranty are the
sole responsibility of the purchaser.This warranty only applies to the original purchaser and is
not transferable.
Do Not Return The Unit to the Place of Purchase
Contact Erickson Manufacturing Ltd’sTechnical Service and service people will troubleshoot any
issue via phone or email. Repairs or replacements without prior authorization, or at an unauthorized
repair facility, will not be covered by this warranty.
