ermengineering TM-200 Manuale utente
Use and maintenance manual
Manual die cutter
Model: TM-200
____________________________________________________________________________________________________________________
www.ermengineering.com info@ermengineering ✆(+34)937632525
P a g . 1
(Original) Use and maintenance manual
Type: Manual die cutter 200mm for timing belts
Model: TM-200
IMPORTANT
Read this user manual and follow the instructions and warnings before operating this device.
Any modification or transformation performed on this machine may cause loss of the
manufacturer’s guarantee and liability.
This manual must always remain near to the machine and visible to all the operating and
maintenance staff, for any future consultation, forming part of the equipment.
Use and maintenance manual
Manual die cutter
Model: TM-200
____________________________________________________________________________________________________________________
P a g . 2
Index:
Page
-CE Declaration of conformity:................................................................................................................................................3
-Description: ..................................................................................................................................................................................4
-Technical characteristics:........................................................................................................................................................4
-Using instructions: .....................................................................................................................................................................4
Operate instructions:.............................................................................................................................................................................................. 4
Belt cutting measurements for the different punches. .............................................................................................................................. 6
Changing die head ................................................................................................................................................................................................... 6
Adjust the pressure stroke:................................................................................................................................................................................... 6
-Spare parts:...................................................................................................................................................................................8
Use and maintenance manual
Manual die cutter
Model: TM-200
____________________________________________________________________________________________________________________
P a g . 3
-CE Declaration of conformity:
WE DECLARE, under our responsibility, that the machine:
- Type: Manual die cutter
- Brand: ERM Engineering
- Model: TM-200
- Serial No.: xxxxxx
- Manufacturer date: 2021
Inspired by the directives of the Official Journal of the European Communities:
2006/42/CE Machinery Directive
Complies with the design and construction specifications of the European Standards on General
Machine Safety:
EN 349 –EN 614-1 –EN 614-2 –EN 12100 –EN 11161-1 - EN 1005-1 –EN 1005-2 –EN
1005-3 - EN 1005-4 –EN 13849-1 –EN 13849-2 –EN 894-3 –EN 13857 –EN 14120
General Manager: Eduardo Ramos Martínez
Arenys de Munt (Barcelona)-SPAIN
Date: 2021/08
Use and maintenance manual
Manual die cutter
Model: TM-200
____________________________________________________________________________________________________________________
P a g . 4
-Description:
Portable die cutter to cut conveyor belts in zigzag, Exchangeable cutting heads for different cutting
geometries.
Support bench with material positioning guides.
This die cutter is especially designed to operate onsite for cut thermoplastic materials with
interior tissue.
The head is removable to reduce the weight during the transport.
-Technical characteristics:
Dimensions 600x240x520 (l x w x h)
Weight 32 Kg
Max. Thickness 15 mm.
Max. belt width 200 mm.
Standard finger 120x15 mm
-Using instructions:
WARNING:
THIS DEVICE INVOLVES THE HAZARD OF HANDS AND ARMS BEING TRAPPED BY THE
MOVEMENT OF THE CUTTING HEAD
GREAT CARE MUST ALSO BE TAKEN BETWEEN THE CUTTING HEAD AND THE SUPPORT
PLATE, AS THERE IS A DANGER OF CUTTING LIMBS.
Operate instructions:
Cut the belt 200 mm longer than final measure.
First we place the first end of the belt on the pins side by the guide rail with the teeth on top and
position under the two trad bar until end of aluminum plate.
Use and maintenance manual
Manual die cutter
Model: TM-200
____________________________________________________________________________________________________________________
P a g . 5
Before fix the belt, adjust the possition in the table line.
Fix the belt lowering the bar with two knobs tightening at the same time.
Once the belt is in position and complete fixed, unlock the step pin and move the table until first
hole of step plate.
After each cut operation , handle are complete unlock the pin possition and move the table until
next hole.
Use and maintenance manual
Manual die cutter
Model: TM-200
____________________________________________________________________________________________________________________
P a g . 6
When the first head of belt are complete punched, open the clamp , remove the belt and introduce
the second head in the oposite side, with teeth on top also.
Belt cutting measurements for the different punches.
120x15 90º………………….......................................……200 mm. Longer
Changing die head
WARNING:
When changing the die, it is recommended to turn off the equipment with the OFF switch
for greater safety.
Remove the punching head for replaces the knives plate.
We remove the 2 bolts using a 5mm Allen key.
We remove the die and install the new one.
We tighten the 2 bolts again.
Adjust the pressure stroke:
NOTE:
We must adjust the cutting pressure for every time that aluminium plate is replaced.
Otherwise, excess pressure may cause breakage of the blades, or deterioration of the
cutting nylon.
Loosen the 4 screws key 17mm M-10.
Use and maintenance manual
Manual die cutter
Model: TM-200
____________________________________________________________________________________________________________________
P a g . 7
Up or down the back side of head across the screw (P) pressure like a next picture.
Use and maintenance manual
Manual die cutter
Model: TM-200
__________________________________________________________________________________________________________________________________________________________________________
P a g 8
-Spare parts:
Use and maintenance manual
Manual die cutter
Model: TM-200
__________________________________________________________________________________________________________________________________________________________________________
P a g 9
Use and maintenance manual
Manual die cutter
Model: TM-200
__________________________________________________________________________________________________________________________________________________________________________
P a g 10
Indice
Altri manuali ermengineering Taglierina
