ERNITEC TAURUS DX 2 SERIES Manuale utente

TAURUS DX 2 SERIES

Low Light Box Camera

User’s Manual

Ver. 2.0

Table of Contents

1. Overview..................................................................................................................................2

1.1 Features........................................................................................................................2

1.2 Package Contents.........................................................................................................3

1.3 Dimensions.................................................................................................................... 4

1.4 Connectors....................................................................................................................5

1.4.1 Light Sensor (ABF Models Only)................................................................... 6

2. Camera Cabling....................................................................................................................... 6

2.1 Power Connection.........................................................................................................6

2.2 Ethernet Cable Connection...........................................................................................6

2.3 Lens Mounting............................................................................................................... 7

2.4 Alarm I/O Connection....................................................................................................7

2.5 RS-485 Connection (DC12V/AC24V/PoE Models) ....................................................... 7

3. System Requirements ............................................................................................................ 8

4. Access Camera .......................................................................................................................9

4.1 Lock ABF Function (ABF Models Only)....................................................................... 13

5. Setup Video Resolution........................................................................................................ 14

6. Configuration File Export / Import....................................................................................... 15

7. Tech Support Information.................................................................................................... 16

7.1 Delete the Existing DCViewer.....................................................................................16

7.2 Setup Internet Security................................................................................................ 17

7.3 Back Focus Adjustment (Non-ABF Models Only) ....................................................... 18

Appendix: Technical Specifications

1. Overview

Full HD Multi-Streams Ultra-WDR Box IP Camera features multiple streams, and

supports up to 1080p @ 60 fps. Ultra Dynamic Range offers excellent images

from combined two/four shutter speeds exposed pictures under extreme high

contrast environments.

Besides excellent wide dynamic range performance, with latest CMOS sensor,

the camera is also capable of handling the surveillance in nearly total darkness

environments. Combining the advantages of shutter WDR and low light ability,

the camera is especially ideal for traffic application and entrance surveillance.

Moreover, Full HD Multi-Streams Ultra-WDR Box IP Camera is built-in with Auto

Back Focus (ABF) function. User can simply adjust focus by clicking control

buttons on webpage that makes focus adjustment easier and also makes remote

focus tuning available after installation.

1.1 Features

1.3 MP / 2MP Sony Progressive Scan CMOS Sensor

Quad Streams Compression- H.264 Baseline / Main / High Profile + MJPEG

Quad Streams Support

Dual Streams, Full HD 1080P @ 60fps + D1 @ 30fps

Smart Event Function-

Motion Detection / Network Failure Detection / Tampering Alarm / Periodical

Event / Manual Trigger / Face Detection / Audio Detection

Ultra Dynamic Range

Auto Back Focus (ABF)*

Text Overlay and Privacy Masks

microSD Card Support

BNC Analog Output

Triple Power Support- PoE / DC 12V / AC 24V*

RS-485 Support*

ONVIF Profile S Conformance

(*) Optional

1.2 Package Contents

Please check the package containing the following items listed below.

Full HD Multi-Streams

Ultra-WDR Box IP Camera

Back Focus Adjuster*

Quick Guide

*For Non-ABF models.

NOTE: To purchase power adaptor, please contact the camera

manufacturer for further information.

1.3 Dimensions

The IP camera’s dimensions are shown below.

Non-ABF Models

ABF Models

1.4 Connectors

The diagram below shows the various connectors of the camera. Definition for

each connector is given as follows.

DC 12V / PoE DC 12V / AC 24V / PoE

No.

Item

Definition

Remarks

Audio I/O

(Line In/Out)

- Two-way audio transmission

Power LED

For power connection indication (green light)

3 Default Button -

Press the button with a proper tool for at least 20

seconds to restore the system.

Auto Iris

For auto iris lens connection

RJ-45

For network and PoE connections

Network LEDs

For network connection and activity indication

7 Alarm I/O *

Alarm Out +

Alarm connection

Alarm Out –

Alarm In +

Alarm In –

GND

Ground connection

D –

RS-485 connection

D +

BNC

For analogue video output

9 microSD Card Slot -

Insert the microSD card into the card slot to store

videos and snapshots. Do not remove the microSD

card when the camera is powered on.

10 Power

(DC12V / AC 24V)

(AC 24V Model)

＋DC 12V AC 24V 1

Power connection

DC 12V

Reserved

AC 24V GND

－DC 12V GND

AC 24V 2

*Do NOT connect external power supply to the alarm I/O connector of the camera.

NOTE: It is not recommended to record with the microSD card for 24/7

continuously, as it may not be able to support long term continuous data

read/write. Please contact the manufacturer of the microSD card for

information regarding the reliability and the life expectancy.

1.4.1 Light Sensor (ABF Models Only)

ForABF models, a light sensor is located at the front of the cameras. The location

and definition of the light sensor is as below.

No.

Item

Definition

Light Sensor

Ambient light detection for day/night switching function.

2. Camera Cabling

Please follow the instructions below to complete IP camera installation.

2.1 Power Connection

Please refer to section Connectors.Alternatively, users can power up the camera

by PoE if a Power Sourcing Equipment (PSE) switch is available. Refer to the

section below for Ethernet cable connection.

NOTE: If PoE is used, make sure PSE is in use in the network.

2.2 Ethernet Cable Connection

To have best transmission quality, cable length shall not exceed 100 meters.

Connect one end of the Ethernet cable to the RJ-45 connector of the camera,

and the other end of the cable to the network switch or PC. The RJ-45 port

networks without routing to the outside plant.

NOTE: In some cases Ethernet crossover cable might be needed when

connecting the camera directly to the PC.

Check the status of the link indicator and the activity indicator LEDs. If the LEDs

are unlit, please check the LAN connection.

Green Link Light indicates good network connection.

Orange Activity Light flashes for network activity indication.

2.3 Lens Mounting

Follow the steps below to mount the C/CS Mount Lens to the camera.

Step 1: Remove the plastic cover of the camera.

Step 2: Remove the dustproof protective film from the CMOS image sensor.

Step 3: For Non-ABF models, mount the C/CS Mount Adapter to the camera.

Step 4: Attach the C/CS Mount Lens to the adapter.

C/CS Mount Adapter Completion

2.4 Alarm I/O Connection

The camera supports one alarm input and one relay output for alarm application.

Refer to alarm pin definition below to connect alarm devices to the IP camera if

needed.

DC 12V / PoE

DC 12V / AC 24V / PoE

1. Alarm Out +

2. Alarm In −

3. Alarm Out +

4. Alarm In −

2.5 RS-485 Connection (DC12V/AC24V/PoE Models)

The RS-485 connector is the interface for connecting with the pan & tilt

positioning system.

6. D

−

7. D +

3. System Requirements

To perform the IP camera via web browser, please ensure the PC is in good

network connection, and meet system requirements as described below.

Items System Requirement

Personal Computer

Minimum :

1. Intel® CoreTM i5-2430M @ 2.4 GHz

2. 4 GB RAM

Recommended :

1. Intel® CoreTM i7-870 @ 2.93 GHz

2. 8 GB RAM

Operating System

Windows VISTA / Windows XP / Windows 7

Web Browser

Microsoft Internet Explorer 7.0 or later (recommended)

Firefox (32-bit)

Safari

Network Card 10Base-T (10 Mbps), 100Base-TX (100 Mbps) or

1000Base-T operation

Viewer ActiveX control plug-in for Microsoft IE

Apple QuickTime 7.7.7 or before for Firefox

NOTE: The ITE is to be connected only to PoE networks without routing

to the outside plant or equivalent description.

4. Access Camera

For initial access to the IP camera, users can search the camera through the

installer program: DeviceSearch.exe.

Accessing the Camera by Device Search Software

Step 1: Double click on the program Device Search.exe.

Step 2: After its window appears, click on the <Device Search> button on the

top. All the finding IP devices will be listed in the page.

Step 3: Find the camera in the list by its IP address and click on it. The default

IP address of the camera is: 192.168.0.250.

Step 4: The default IP address of the camera may not be in the same LAN as

the IP address of the PC. If so, the IP address of the camera needs to

be changed. Right click on the camera and click <Network Setup>.

Meanwhile, record the MAC address of the camera, for future

identification.

Step 5: The <Network Setup> page will come out. Select <DHCP> and click

<Apply> down the page. The camera will be assigned with a new IP

address.

Step 6: Click <OK> on the Note of setting change. Wait for one minute to re-

search the camera.

Step 7: Click on the <Device Search> button to re-search all the devices. Find

the camera in the list by its MAC address. Then double click or right

click and select <Browse> to access the camera directly via a web

browser.

Indice

Manuali Macchina fotografica digitale popolari di altre marche

Mercury

Mercury 350K Manuale utente

Pentax

Pentax Optio LS 465 Manuale utente

Sanyo

Sanyo VPC-S1085 Manuale utente

GE SMART A1255 Manuale utente

Point Grey

Point Grey Gazelle Manuale utente

Nikon

Nikon COOLPIX A Manuale utente

Pentax

Pentax P-5 Manuale utente

BlazeVideo

BlazeVideo A280 Manuale utente

Sony

Sony MCA-20 Manuale utente

Sony

Sony Alpha DSLR-A290 Manuale utente

ATIK Cameras

ATIK Cameras One Manuale utente

CohuHD Costar

CohuHD Costar 3930 Series Manuale utente

Leica

Leica M10-R Manuale utente

FujiFilm

FujiFilm FinePix A700 Manuale utente

Lorex

Lorex LNZ81P25 Series Manuale utente

GE J1470S Manuale utente

Sony

Sony A6700 Guida utente

Canon

Canon EOS ELAN7 Manuale utente