ESAB SR-B 9 Manuale utente

Instruction manual 0GGCAGH*ccgjgc+

0463 697 001 GB 20210113

SR-B9, SR-B17, SR-B26,

SR-B26-HD, SR-B18, SR-B20,

SR-B21, SR-B400, XCT-B400W

TABLE OF CONTENTS

0463 697 001 © ESAB AB 2021

1SAFETY ....................................................................................................... 4

2INTRODUCTION.......................................................................................... 8

2.1 Overview ................................................................................................. 8

3TECHNICAL DATA ...................................................................................... 9

4OPERATION ................................................................................................ 11

4.1 General .................................................................................................... 11

4.2 Connections............................................................................................ 11

4.3 Choice of electrode ................................................................................ 11

4.4 Grinding................................................................................................... 12

4.5 Bending of the flexible torch ................................................................. 12

4.6 Valve torches .......................................................................................... 12

5MAINTENANCE........................................................................................... 13

5.1 Daily......................................................................................................... 13

6TROUBLESHOOTING ................................................................................. 14

7ORDERING SPARE PARTS ........................................................................ 15

ORDERING NUMBERS....................................................................................... 16

WEAR PARTS...................................................................................................... 18

Rights reserved to alter specifications without notice.

1 SAFETY

0463 697 001 -4- © ESAB AB 2021

1 SAFETY

As used throughout this manual: Means Attention! Be Alert!

DANGER!

Means immediate hazards which, if not avoided, will result in immediate,

serious personal injury or loss of life.

WARNING!

Means potential hazards which could result in personal injury or loss of life.

CAUTION!

Means hazards which could result in minor personal injury.

WARNING!

Before use, read and understand the instruction manual

and follow all labels, employer´s safety practices and

Safety Data Sheets (SDSs).

Users of ESAB equipment have the ultimate responsibility for ensuring that anyone who

works on or near the equipment observes all the relevant safety precautions. Safety

precautions must meet the requirements that apply to this type of equipment. The following

recommendations should be observed in addition to the standard regulations that apply to

the workplace.

All work must be carried out by trained personnel well-acquainted with the operation of the

equipment. Incorrect operation of the equipment may lead to hazardous situations which can

result in injury to the operator and damage to the equipment.

1. Anyone who uses the equipment must be familiar with:

○ its operation

○ location of emergency stops

○ its function

○ relevant safety precautions

○ welding and cutting or other applicable operation of the equipment

2. The operator must ensure that:

○ no unauthorised person is stationed within the working area of the equipment

when it is started up

○ no-one is unprotected when the arc is struck or work is started with the

equipment

3. The workplace must:

○ be suitable for the purpose

○ be free from drafts

1 SAFETY

0463 697 001 -5- © ESAB AB 2021

4. Personal safety equipment:

○ Always wear recommended personal safety equipment, such as safety glasses,

flame-proof clothing, safety gloves

○ Do not wear loose-fitting items, such as scarves, bracelets, rings, etc., which

could become trapped or cause burns

5. General precautions:

○ Make sure the return cable is connected securely

○ Work on high voltage equipment may only be carried out by a qualified

electrician

○ Appropriate fire extinguishing equipment must be clearly marked and close at

hand

○ Lubrication and maintenance must not be carried out on the equipment during

operation

WARNING!

Arc welding and cutting can be injurious to yourself and others. Take precautions

when welding and cutting.

ELECTRIC SHOCK - Can kill

• Install and ground the unit in accordance with instruction manual.

• Do not touch live electrical parts or electrodes with bare skin, wet gloves or

wet clothing.

• Insulate yourself from work and ground.

• Ensure your working position is safe

ELECTRIC AND MAGNETIC FIELDS - Can be dangerous to health

• Welders having pacemakers should consult their physician before welding.

EMF may interfere with some pacemakers.

• Exposure to EMF may have other health effects which are unknown.

• Welders should use the following procedures to minimize exposure to

EMF:

○ Route the electrode and work cables together on the same side of

your body. Secure them with tape when possible. Do not place your

body between the torch and work cables. Never coil the torch or work

cable around your body. Keep welding power source and cables as

far away from your body as possible.

○ Connect the work cable to the workpiece as close as possible to the

area being welded.

FUMES AND GASES - Can be dangerous to health

• Keep your head out of the fumes.

• Use ventilation, extraction at the arc, or both, to take fumes and gases

away from your breathing zone and the general area.

ARC RAYS - Can injure eyes and burn skin

• Protect your eyes and body. Use the correct welding screen and filter lens

and wear protective clothing.

• Protect bystanders with suitable screens or curtains.

NOISE - Excessive noise can damage hearing

Protect your ears. Use earmuffs or other hearing protection.

1 SAFETY

0463 697 001 -6- © ESAB AB 2021

MOVING PARTS - Can cause injuries

• Keep all doors, panels and covers closed and securely in place. Have only

qualified people remove covers for maintenance and troubleshooting as

necessary. Reinstall panels or covers and close doors when service is

finished and before starting engine.

• Stop engine before installing or connecting unit.

• Keep hands, hair, loose clothing and tools away from moving parts.

FIRE HAZARD

• Sparks (spatter) can cause fire. Make sure that there are no inflammable

materials nearby.

• Do not use on closed containers.

HOT SURFACE - Parts can burn

• Do not touch parts bare handed.

• Allow cooling period before working on equipment.

• To handle hot parts, use proper tools and/or insulated welding gloves to

prevent burns.

MALFUNCTION - Call for expert assistance in the event of malfunction.

PROTECT YOURSELF AND OTHERS!

CAUTION!

This product is solely intended for arc welding.

WARNING!

Do not use the power source for thawing frozen pipes.

CAUTION!

Class A equipment is not intended for use in residential

locations where the electrical power is provided by the

public low-voltage supply system. There may be

potential difficulties in ensuring electromagnetic

compatibility of class A equipment in those locations,

due to conducted as well as radiated disturbances.

1 SAFETY

0463 697 001 -7- © ESAB AB 2021

NOTE!

Dispose of electronic equipment at the recycling

facility!

In observance of European Directive 2012/19/EC on

Waste Electrical and Electronic Equipment and its

implementation in accordance with national law,

electrical and/or electronic equipment that has reached

the end of its life must be disposed of at a recycling

facility.

As the person responsible for the equipment, it is your

responsibility to obtain information on approved

collection stations.

For further information contact the nearest ESAB dealer.

ESAB has an assortment of welding accessories and personal protection equipment

for purchase. For ordering information contact your local ESAB dealer or visit us on

our website.

2 INTRODUCTION

0463 697 001 -8- © ESAB AB 2021

2 INTRODUCTION

2.1 Overview

TIG torches SR-B9, SR-B17, SR-B26, SR-B26-HD, SR-B18, SR-B20, SR-B21,

SR-B400 and XCT-B400W are intended for manual TIG welding and available with water or

air cooled versions.

Certain models are available with flex heads for unlimited movement in confined spaces.

Accessories for the product can be found in the "ACCESSORIES" chapter of this

manual.

The TIG torch is supplied with:

• wear parts (except electrodes):

○ Ø 1.6mm (0.063in.) SR-B9

○ Ø 2.4mm (0.094in.) SR-B17

○ Ø 2.4mm (0.094in.) SR-B26

○ Ø 2.4mm (0.094in.) SR-B26-HD

○ Ø 2.4mm (0.094in.) SR-B20

○ Ø 2.4mm (0.094in.) SR-B21

○ Ø 2.4mm (0.094in.) SR-B400

○ Ø 2.4mm (0.094in.) XCT-B400W

• instruction manual

3 TECHNICAL DATA

0463 697 001 -9- © ESAB AB 2021

3 TECHNICAL DATA

Operating temperature range: -10 to +40°C (+14 to +104°F)

Transportation temperature range: -20 to +55°C (+4 to +131°F)

SR-B

9FX

SR-B

17FX

SR-B

17V

SR-B

26FX

SR-B

26V

AC [A] / %

DC [A] / %

80/60

110/60

100/60

140/60

200/60

0.5–1.6mm

(0.02– 0.063in.)

0.5–2.4mm

(0.02– 0.094in.)

0.5–4.0mm

(0.02– 0.157in.)

Ar/He

4 & 8m

(13 & 26ft)

X - X - X -

12kV

113V

SR-B

26-HD

26FX-HD

SR-B

26V-HD

SR-B

18FX

SR-B

20FX

SR-B

21FX

SR-B

400

XCT-B

400W

- - X X X X X

-70°C

(158 °F)

AC [A] / %

DC [A] / %

160/60

230/60

225/100

320/100

160/100

220/100

240/100

340/100

315/100

450/100

0.5–4.0mm

(0.02– 0.157in.)

0.5–3.2

(0.02– 0.126in.)

1.0–4.8

(0.039–

0.189in.)

1.6–4.0

(0.063–

0.157in.)

Ar/He

4 & 8m

(13 & 26ft)

X - X X X X X

3 TECHNICAL DATA

0463 697 001 - 10 - © ESAB AB 2021

12kV

113V

Specification of the torch cooling circuit

(for water cooled torches only)

• min. water pressure: 2.5bar

• max. water pressure: 4.0bar

The necessary cooling power is dependent of the application, the welding parameters and

the length of the torch. Sufficiency of available cooling power can be verified by measuring

the return temperature of the cooling fluid. If the return temperature is above 60°C (140°F),

the cooling power should be increased or the welding current should be reduced.

Recommended minimum values for cooling power and coolant flow rate

Welding current /

Torch length

Up to 300ADC /

210AAC

Up to 450ADC /

315AAC

Up to 500ADC /

350AAC

4m 1.0kW / 1.0l/min 1.2kW / 1.2l/min 1.6kW / 1.4l/min

8m 1.6kW / 1.2l/min 2.0kW / 1.4l/min 2.5kW / 1.7l/min

For other application parameters or longer cables, refer to additional documents that may

have been included with your torch.

CAUTION!

Return temperatures of more than 60°C can cause damage or destruction of the

torch. The cooler must always be filled with sufficient cooling liquid, refer the user

manual of the cooling unit. In case of a high thermal load on the torch, use a cooler

with sufficient capacity. Use only special cooling fluid containing corrosion inhibitors

for welding torches. We recommend using ESAB CoolingFluid.

Duty cycle

The duty cycle refers to the time as a percentage of a ten-minute period that you can weld or

cut at a certain load without overloading. The duty cycle is valid for 40°C (104°F), or below.

Protection class

The torches protection class machine side (EN 60 529) IP3X

Enclosure class

The IP code indicates the enclosure class, i.e. the degree of protection against penetration

by solid objects of 2.5 mm Ø and greater. Omitting second characteristic numeral.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali ESAB Sistema di saldatura

ESAB

ESAB Feed L302 Origo M08 Manuale utente

ESAB

ESAB 35833 Manuale utente

ESAB

ESAB ROGUE EM 140 Manuale utente

ESAB

ESAB Origo Arc 250 Manuale utente

ESAB

ESAB ESP-101 Manuale utente

ESAB

ESAB Aristo Robust Feed U6 Manuale utente

ESAB

ESAB LAF 800 DC Manuale utente

ESAB

ESAB 350mpi Manuale utente

ESAB

ESAB PCM-875A Manuale utente

ESAB

ESAB A6 Mastertrac Manuale utente

ESAB

ESAB Multimaster-260 Manuale del proprietario

ESAB

ESAB LHI 825 Guida

ESAB

ESAB Warrior 500i CC Manuale utente

ESAB

ESAB Tig 4000i Aristo Manuale utente

ESAB

ESAB MEK 4 Manuale utente

ESAB

ESAB Origo Mig C170 3ph Manuale utente

ESAB

ESAB ES 150i Manuale utente

ESAB

ESAB DTE 255 Manuale utente

ESAB

ESAB POWERCUT-1250 Guida all'installazione

ESAB

ESAB Migmaster 275 Manuale utente

ESAB

ESAB ESABMig C240 Manuale utente

ESAB

ESAB PT-26 Manuale utente

ESAB

ESAB Rogue ES 130i PRO Manuale utente

ESAB

ESAB Caddyt Tig 150i Manuale utente

Manuali Sistema di saldatura popolari di altre marche

Berner

Berner PLASMACUT 54 Manuale utente

Pro Spot

Pro Spot PR-155 Manuale utente

Forney

Forney 210 Manuale utente

Thermal Arc

Thermal Arc 400S Manuale utente

Lincoln Electric

Lincoln Electric HANDYMIG 170I Manuale utente

GYS

GYS PROTIG 201 AC/DC Manuale utente

TAFA

TAFA 30*8B35 Manuale utente

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Manuale utente

CIGWELD

CIGWELD 636804 Guida rapida

Red-D-Arc

Red-D-Arc DC-400 Manuale utente

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Manuale utente

Elettro

Elettro HI-MIG 3000 SYNERGIC Manuale utente

WIA

WIA Weldmatic 270 CP132-2 Manuale utente

Sonics

Sonics H520T Manuale utente

Miller

Miller Big Blue 400D Manuale utente

NewArc

NewArc RT2000 Guida rapida

Hypertherm

Hypertherm powermax1000 Manuale utente

Lincoln Electric

Lincoln Electric POWER WAVE I400 Manuale utente