ES&S ExpressVote XL Manuale utente
ExpressVote XLTM
Universal Voting
System
Poll Worker Guide
v. 1.1.PHI
Table of Contents
ExpressVote XLTM Universal Voting System Administrator Learning Plan................3
Agenda.....................................................................................................................3
ExpressVote XL®Universal Voting System.............................................................4
Product Overview & ExpressVote XL Components..................................................4
ExpressVote XL Rear Components............................................................................5
Hopper Components & Functionality...................................................................6
Preparing the ExpressVote XL for Use.................................................................7
ExpressVote XL Setup.................................................................................................7
Installing Privacy Curtain & Adjusting Touch Screen Angle......................................7
Connecting Assistive Voting Equipment..................................................................7
Using the ExpressVote XL on Election Day.........................................................8
USB Collection...........................................................................................................8
Opening the Poll.......................................................................................................8
Printing Zero Tape......................................................................................................8
Voting on ExpressVote XL...................................................................................9
Initiate Voting & Language Selection......................................................................10
Making Vote Selections on Touch Screen..............................................................10
Verifying Selections & Casting Ballots..................................................................10
Accessible Voting...............................................................................................11
Universal Voting Console.........................................................................................11
Initiating UVC Voting Session................................................................................11
Voting with the UVC.................................................................................................11
End of Voting.....................................................................................................12
Closing the Poll.......................................................................................................12
Printing Results Report............................................................................................12
Powering Down & Storing.......................................................................................12
Appendix A: Troubleshooting the ExpressVote XL..........................................13
Jammed Paper Ballot..............................................................................................13
ExpressVote XL Not Accepting Paper Ballot........................................................13
Session Timeout & Canceling a Vote Session.........................................................13
System Error During Voting.....................................................................................13
Calibrating the Touch Screen...................................................................................13
Page | 2
ExpressVote XL Universal Voting System | Poll Worker Guide v 1.1.PHI
ExpressVote XLTM Universal Voting System
Poll Worker Learning Plan
Agenda
•Understanding the ExpressVote XL
•Using the ExpressVote XL for Voting
•Troubleshooting the ExpressVote XL
•Applying what you have learned
Page | 3
ExpressVote XL Universal Voting System | Poll Worker Guide v 1.1.PHI
ExpressVote XL®Universal Voting System
Product Overiew & ExpressVote XL Components
The ExpressVote XL Universal Voting System is a full-face, 32” touch screen
ballot. The ExpressVote XL captures a voter’s choices by marking a paper ballot
while also tabulating the vote data for later collection and reporting.
With the ExpressVote XL, voters can cast their vote choices independently either
via the touch-operated screen or the Universal Voting Console (“UVC”).
ExpressVote XL Components
2
1
Rolling cart
32” touch screen
Power status panel
1
2
3
Access compartment
4
Protective screen cover
Report printer
Paper path module (“PPM”)
5
6
7
Paper ballot slot
8
3
4
5
6
7
8
Page | 4
ExpressVote XL Universal Voting System | Poll Worker Guide v 1.1.PHI
ExpressVote XL Rear Components
Power cord
6
Headphones
7
8Rolling cart handle
Privacy curtain rod mount
Hopper
Privacy curtain storage
Universal voting console (“UVC”)
1
2
3
5
1
2
5
7
3
8
4
6
9Emergency slot & bin
(with zoom to exterior view)
4
9
9
Storage area*
(storage door intended to be snug when closed;
when opening, push in on the door with one
hand while turning the key with the other)
Page | 5
ExpressVote XL Universal Voting System | Poll Worker Guide v 1.1.PHI
Hopper Components & Functionality
1
25
6
2
4
6
Ballot level window
Handle (two views)
Secure seal attachment loop
(seal will be placed here at the end
of the night)
Kiosk attachment (two views)
Door
1
4
2
3
5
6
The Hopper provides secure storage for printed paper ballots ejected from the rear of the machine.
It attaches to the back of the PPM via the green handle at the top of the hopper. The hopper is
removed by pushing the bottom green lever forward within the Paper Path Module and lifting it
off the mounting hook.
The following images display the container mounting and disconnect steps. Poll Workers will
need to perform these steps at the end of the night.
Secure seal attachment loop
(seal will be placed here at the end
of the night)
3
Page | 6
ExpressVote XL Universal Voting System | Poll Worker Guide v 1.1.PHI
Preparing the ExpressVote XL for Use
ExpressVote XL Setup
Confirm the green power indicator light is
illuminated on the front status panel. This
indicates the ExpressVote XL is plugged into
AC power.
Lift the protective screen cover from the
touch screen. Unlock and open the Access
Compartment door on top of the terminal.
Inside the Access Compartment, press and
release the red power button. Once powered
on, the power light is illuminated.
Installing Privacy Curtain &
Adjusting Touch Screen Angle
Remove the curtain assembly from the storage
tube on the bottom back of the terminal.
Insert rods into the mounting brackets on
either side of cart. Loosen the white plastic
clamps on the assembly to adjust height, then
re-tighten.
Connecting Assistive Voting
Equipment
The Universal Voting Console (“UVC”) allows
voters to vote without using the touch screen.
The UVC plugs into the USB port in the Access
Compartment. Only one unit per polling
loction will have a UVC.
Headphones connect to the UVC via the
headphone jack on the bottom right corner.
Thread the UVC wire carefully through the
notch in the upper-left corner of the door as
you close it. Not doing so could cause damage
to the wire.
Touch Screen
Locking Pin
Mounting
Brackets
ExpressVote XL Universal Voting System | Poll Worker Guide v 1.1.PHI Page | 7
USB Collection
The USB drive must remain in the ExpressVote
XL while the polls are open.
When the poll is closed, results will be saved
to the USB and collected at the end of the
night.
Using the ExpressVote XL on
Election Day
Opening the Poll
Touch the Open Poll button. Enter the
Election Code and touch Accept. The screen
will indicate when the opening procedure is
completed.
Printing Zero Tape
The ExpressVote XL will print a Zero Tape
automatically.
ExpressVote XL Universal Voting System | Poll Worker Guide v 1.1.PHI Page | 8
Initiate Voting & Language
Selection
To initiate a vote session, insert a paper ballot
into the card slot. This ballot can be blank or
have a pre-printed bar code.
Select the correct language from the Language
Selection screen and touch Next.
Voting on ExpressVote XL
Making Vote Selections on
Touch Screen
Touch to select the candidate. The system
displays a check mark and highlights your
selection in green. De-select by touching the
choice again.
For write-in votes, touch Write-in and enter
choice. Touch Accept.
NOTE: If a Straight Party selection is made and you vote
manually in a contest for a candidate of a different party,
Straight Party vote(s) for that contest are de-selected
automatically.
Verifying Selections &
Casting Ballots
After making your vote selections, verify they
are correct. If you want to change choices
after reviewing printed selections, touch Quit
to vote ballot. To vote your ballot, touch Print
Ballot.
The printed ballot will appear in the preview
pane. If correct, touch Vote. The printed ballot
is deposited into the hopper.
ExpressVote XL Universal Voting System | Poll Worker Guide v 1.1.PHI Page | 9
Universal Voting Console
The Universal Voting Console (“UVC”) plugs
into the back of the terminal, allowing assistive
voting for voters who cannot use the touch
screen.
Accessile Voting
Initiating UVC Voting Session
To help activate Assistive Mode for voters to
use the UVC to make vote selections after the
paper ballot is inserted and the ballot displays
on-screen. Press the Select button.
Press the Next button on-screen. This initiates
Assistive Mode on the terminal and produces
the Help screen.
Press Next to exit or Select to generate a blank
screen to provide voter privacy. Assist the Voter
with adjusting volume, if needed, before they
begin voting.
Voting with the UVC
Voters using Assistive Mode will use the UVC
to navigate and headphones to listen to audio
ballot instructions. Headphones connect to the
jack in the lower-right side of the UVC.
Voters may also connect a Rocker Switch device
to the jack on the lower-left side of the UVC
and follow the audio ballot instructions.
The Voter will use the UVC or Rocker Switch
controls to make vote selections, finalize, print,
and cast their ballot.
ExpressVote XL Universal Voting System | Poll Worker Guide v 1.1.PHI Page | 10
Indice
Manuali Schermo tattile popolari di altre marche
Elecro Engineering
Elecro Engineering Poolsmart Plus Istruzioni per l'installazione
Johnson Controls
Johnson Controls IQ4 HUB Manuale utente
Elo TouchSystems
Elo TouchSystems ET2270L Manuale utente
Elo TouchSystems
Elo TouchSystems ET1002L Manuale utente
Elo TouchSystems
Elo TouchSystems 3201L Manuale utente
Duratec
Duratec S15 Manuale utente
