ESD electronic PMC-DVI Manuale utente
PMC-DVI Hardware Manual Rev. 1.0
PMC-DVI
DVI-Graphics Card
Hardware Manual
PMC-DVI Hardware Manual Rev. 1.0
Document File: I:\texte\Doku\MANUALS\PMC\PMC-DVI\Englisch\PMC-DVI_10.en9
Date of Print: 07.04.2003
PCB Version: PMCVGA Rev. 1.0
Changes in the chapters
The changes in the user’s manuallisted below affect changes in the hardware,as well as changes in the
description of the facts only.
Chapter Changes versus previous version
-First version
-
Further technical changes are subject to change without notice.
PMC-DVI Hardware Manual Rev. 1.0
N O T E
The information in this document has been carefully checked and is believed to be entirely reliable. esd
makes no warranty of any kind with regard to the material in this document, and assumes no
responsibility for any errors that may appear in this document. esd reserves the right to make changes
without notice to this, or any of its products, to improve reliability, performance or design.
esd assumes no responsibilityfor the use ofany circuitryother than circuitrywhich is part ofaproduct
of esd gmbh.
esd does not conveyto the purchaser ofthe product described herein anylicense under the patent rights
of esd gmbh nor the rights of others.
esd electronic system design gmbh
Vahrenwalder Str. 207
30165 Hannover
Germany
Phone: +49-511-372 98-0
Fax: +49-511-372 98-68
E-mail: [email protected]
Internet: www.esd-electronics.com
USA / Canada
esd
PMB 292
20423 State Road 7 #F6
Boca Raton, Florida 33498-6797
USA
Phone: +1-800-732-8006
Fax: +1-800-732-8093
E-mail: [email protected]
PMC-DVI Hardware Manual Rev. 1.0 1
Contents
1. Overview .................................................................3
1.1 Description of the PMC-DVI Module .........................................3
1.2 Summary of Technical Data .................................................4
1.2.1 General Technical Data ..............................................4
1.2.2 PCI-Bus .........................................................5
1.2.3 Graphics Card ....................................................5
1.2.4 Software Support ..................................................5
1.2.5 Order Information ..................................................6
2. Hardware Installation .......................................................7
3. Front Panel View with LED-Display ...........................................8
3.1 LEDs and Connectors in the Front Panel ......................................8
4. Connector Assignment ......................................................9
4.1 DVI-I-Connector (X300) ...................................................9
4.2 DSUB-Micro Socket X500, PS2-Mouse and -Keyboard ..........................10
4.3 Assignment of the 64-pole PMC-Connector P11 (Pn1/Jn1 32 Bit PCI) ................ 11
4.4 Assignment of the 64-pole PMC-Connector P12 (Pn2/Jn2 32 Bit PCI) ...............12
4.5 Assignment of the 64-pole PMC-I/O Connector P14 (Pn4/Jn4 32 Bit PCI) ............13
PMC-DVI Hardware Manual Rev. 1.02
This page is intentionally left blank.
Overview
PMC-DVI Hardware Manual Rev. 1.0 3
IRQ PLD
BIOS-EPROM
Digital
Graphics Signals
Graphics
Controller
Asiliant
69030
4 MByte
Memory
DVI-
Connector
RGB-Analog Signals and DDC
PS2-Keyboard
and Mouse
Interface
9-pole
DSUB-Micro
Connector
PMC-I/O-
Connector
PMC-
Connector
1. Overview
1.1 Description of the PMC-DVI Module
Fig. 1.1: Block-circuit diagram of PMC-DVI Module
The PMC-DVI is agraphics card in ‘Single’ PCI Mezzanine Card format. Keyboard and mouse can be
connected via a PS2-port on a DSUB-Micro socket.
The PMC-DVI module is equipped withapowerfulgraphics controller 69030 which offers frame rates
from 85 Hz at aresolution of 640x480 (True Colour) to 60 Hz at aresolution of 1600x1200 (16 bit
colours).
The DVI-I-interface can access CRT-monitors via analog video signals as well as TFT-displays via
digital video signals.
The connector of the DVI-I-interface and the connector for the keyboard and the mouse are easy to
access via the front panel.
The LEDs in the front panel show the current status of the PMC-DVI module.
Overview
PMC-DVI Hardware Manual Rev. 1.04
1.2 Summary of Technical Data
1.2.1 General Technical Data
Ambient temperature 0...50 °C
Humidity max. 90 %, non-condensing
Power supply via CompactPCI-Bus,
nominal voltage: 3.3 V,
5 V
Connectors
P11 (64-pol. PMC-connector) - PCI-signals
P12 (64-pol. PMC-connector) - PCI-signals
P14 (64-pol. PMC-connector) - PS2-signals
X300 (DVI24+1, DVI-socket) -
CRT-Monitor and TFT-display
X500 (9-pol. DSUB9-Micro socket) -
PS2-mouse and -keyboard
X200 (8-pole socket, e.g.: CLT-104-02-G-D-BE-A by
Samtec) - only for programming and testing
(ISP-programming)
Dimensions 148.33 mm x 74.04 mm
Fixing four screws M2.5 x 6 mm and distance bolts
Weight 90 g
Table 1.1: General technical data
Overview
PMC-DVI Hardware Manual Rev. 1.0 5
1.2.2 PCI-Bus
Host bus PCI-bus according to PCI Local Bus Specification 2.2
PCI-data 32 bit
Controller Asiliant B69030
Interrupt Interrupt signal A
Table 1.2: PCI-bus interface
1.2.3 Graphics Card
Number 1
Outputs The displays of the digital TFT-display and the analog CRT-monitor
run concurrent and independent from each other
Controller Assiliant B69030
Memory 4 Mbyte on-chip high performance SDRAM
Display Modes
VGA (640x480) with True Colour (24 bit) at 85 Hz
SVGA (800x600) with True Colour at 85 Hz
XGA (1024x768) with High Colour (16 bit) at 85 Hz
SXGA (1280x1024) with 8-bit Colour at 75 Hz
UXGA (1600x1200) with 16-bit Colour at 60 Hz
Table 1.3: Graphics card
1.2.4 Software Support
Graphics drivers for VxWorks, RTOS/UH, Linux and QNX are available for the CPCI-DVI module.
Windows98/NT/2000 is supported as well. Further drivers are available on request.
Overview
PMC-DVI Hardware Manual Rev. 1.06
1.2.5 Order Information
Type Properties Order No.
PMC-DVI Graphics card V.2022.02
PMC-DVI-VxW VxWorks driver V.2022.31
PMC-DVI-ME English manual 1*) V.2022.20
PMC-DVI-ENG Engineering manual in English 2*)
Content: circuit layouts, positions of
components and data sheets of important
components
V.2022.25
1*) The manual is free, if it is ordered together with the product.
2*) This manual is liable for costs, please contact our support.
Table 1.4: Order information
Installation
PMC-DVI Hardware Manual Rev. 1.0 7
2. Hardware Installation
Becausethe PMC-DVImodule canbe inserted to various circuit boards, the carrier system is described
as ‘computer’ in the following.
Attention!
Electro-static discharges may cause damage to electronic components. In order to avoid this please
make sure to follow the steps below beforetouching the CAN-module:
@Switch off the power supply of your computer, but leave it connected to mains.
@Now touch the metal enclosure of the computer to discharge yourself.
@Even your clothes must not touch the CAN-module.
Installation:
1. Switch off your computer and all connected peripheral devices (monitor, printers, etc.).
2. Discharge yourself as described above.
3. Disconnect the computer from mains.
If the computer is tightly connected to mains and does not have any flexible mains power line,
disconnect the mains via the fuse. Make sure that the fuse cannot be switched on unintentionally.
4. Open the enclosure.
5. Insert the PMC-DVI module to a suitable carrier board.
6. Install the carrier board in the system.
7. Close the enclosure again
8. Connect monitor, mouse and keyboard. An adapter for mouse and keyboard is available.
9. Switch on the power supply of the computer again (power plug or fuse).
10. Switch on the computer, the monitor and the peripheral devices.
8. End of hardware installation.
9. Now, you can configure the PS2-interface. For further information refer to the documentation of
your operating system.
Indice
Manuali Scheda video popolari di altre marche
Gainward
Gainward GeForce GTX 690 4GB Manuale utente
ATI Technologies
ATI Technologies RADEON 137-40225-20 Manuale utente
MSI
MSI N220GT series Manuale utente
ATI Technologies
ATI Technologies RADEON 7000 MAC EDITION Manuale utente
SIIG
SIIG aurora Manuale utente
ClearSpeed
ClearSpeed ClearSpeed Advance e720 Manuale utente
