ESI RoMI/O Manuale utente
3
INDEX
1. Introduction to RoMI/O _______________________________________________4
2. Description of RoMI/O ________________________________________________4
3. System Requirement __________________________________________________5
4. Hardware Installation_________________________________________________6
1) Hardware Installation ______________________________________________6
2) Driver Installation _________________________________________________7
5. Setting in Applications _______________________________________________14
1) PC______________________________________________________________14
Cubase SX _______________________________________________________14
Logic ____________________________________________________________15
Sonar____________________________________________________________16
2) MAC____________________________________________________________17
Cubase SX _______________________________________________________17
Nuendo __________________________________________________________18
Reason___________________________________________________________19
zAll features and specifications subject to change for the better performance without notice.
Second Edition, APR. 2004
4
1. Introduction to RoMI/O
Thank you for choosing ESI Miditerminal RoMI/O.
The RoMI/O is a convenient 1 in 2 out, 32 channels USB MIDI Interface for PC and MAC computer.
With the RoMI/O you can obtain perfect MIDI timing and effective audio performance at an extremely affordable
price.
- 1 In 2 Out MIDI (32 MIDI channel)
- Perfect MIDI timing
- High-speed connection to USB-equipped PC or Macintosh computers
- MIDI-activity indicators
- USB-powered; requires no external power supply
- Convenient Cable type
- Extremely compact size (83(W) x 52 (D) x28 (H)mm)
2. Description of RoMI/O
5
1) PWR-Link : When you connect RoMI/O to the computer, this lamp will become red color.
2) MIDI IN: This lamp indicates the MIDI input signal. This lamp will become Yellow color.
3) MIDI OUT1, OUT2: If you send the MIDI signal to OUT1, the lamp will become Green color. In the case of
MIDI OUT2, the lamp will become Red color. If you send the MIDI signal to both OUT1 and OUT2, the
lamp will become orange color.
3. System Requirement
1) PC
Windows XP, 2000, ME
Intel Pentium III CPU or equivalentAMD CPU
Motherboard with Intel series chipsets or VIAchipsets
UDMA66/100 7200rpm hard disk drive
More than 256MB of RAM
2) MAC
MAC OS 10.1 or higher only
Macintosh with G3 or better processor (except the original PowerBook G3)
One available USB port
More than 256MB of RAM
* Caution
1. We don’t recommend using many USB devices with the RoMI/O via USB hub at the same time. It may cause
Input data lose.
2. Some old mainboard that using OHCI (open host controller interface) may cause problem.
3. Check our web site http://www.esi-pro.com occasionally for the most recent update information or technical
issues.
6
4. Hardware Installation
1) Hardware Installation
Before you begin, make sure you have read your computer’s manual on installing USB devices. Your computer’s
manual should describe the precautions you should take.
Shutting down computer wouldn’t need for installing an USB device to the computer. However, we will take it from
the start to make sure you can follow every detail of installation.
1. Find the USB port on your computer. USB port is looked like below. You can find it by the PS/2 or serial ports on
the back of desktop computer system.
USB port on computer
2. Plug in appropriate USB plug of RoMI/O to the USB port of computer.
Turn on the computer.
You will see the LED displays of RoMI/O are lit.
The RoMI/O get the power from the computer via USB cable so you don’t need to attach any external power supplier.
7
2) Exclusive Driver Installation
1. Windows XP/2003
Just plug the USB device, and Insert ESI installation CD into your CD-Rom drive.
Go to ESI folder -> RoMI/O folder
And run Romio.exe.
2. Windows 2000/ME
Don't plug the USB device before install the driver.
Otherwise, your system will be automatically rebooted.
1) Unplug the USB device from your system.
2) Run Romio.exe from your ESI Installation CD.
And click ‘Yes’follow the instruction.
8
9
With Windows 2000 and XP installations, a message might appear stating “The software has not passed Windows
Logo testing to verify its compatibility with Windows XP.” Though the message appeared, the driver is completely
tested and verified by ESI and is safe to use. You can ignore the message and just click ‘Yes’.
10
3) After finishing the driver installation, plug the USB device to your computer.
In the case of Windows 2000, you may see this message again. Simply ignore the message and just click ‘Yes’.
11
4) Go to ‘My computer-> Console -> Sounds and multimedia Properties -> MIDI tab. Select RoMI/O as your
playback device.
12
* In some case of Windows 2000, after rebooting your computer, you may find the following message again.
Just ignore and click ‘Yes’.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali ESI Apparecchiature di registrazione
ESI
ESI Neva Duo Manuale utente
ESI
ESI QuataFire 610 Manuale utente
ESI
ESI GIGAPORT eX Manuale utente
ESI
ESI NeON Manuale utente
ESI
ESI Amber i1 Manuale utente
ESI
ESI Neva Duo Manuale utente
ESI
ESI Amber i1 Manuale utente
ESI
ESI PLANET 22C Manuale utente
ESI
ESI Rekord M Manuale utente
ESI
ESI U46 SE Manuale utente
Manuali Apparecchiature di registrazione popolari di altre marche
Strymon
Strymon NIGHTSKY Manuale utente
Mitsubishi Electric
Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuale utente
Tews Technologies
Tews Technologies TPMC465 Manuale utente
Honeywell
Honeywell Excel 50 Manuale utente
SeaLevel
SeaLevel COMM+8.LPCI Manuale utente
Arturia
Arturia AUDIOFUSE STUDIO Manuale utente
