ESIX Xatellite IoT Manuale utente

Xatellite IoT

Wireless 4G/5G Router

User Manual

V1.04

Table of Content

CHAPTER 1 INTRODUCTION

1.1 Specification

1.2 Packaging Items

1.3 Product description of Xatellite IoT (Front)

1.4 Product description of Xatellite IoT (Back)

1.5 Product description of Xatellite IoT (Sided)

1.6 Product features

CHAPTER 2 NETWORK CONFIGURATION

2.1 Default AP

2.2 Default IP

2.3 Default User

2.4 Typical Network Topology

CHAPTER 3 SPEED TEST

3.1 WiFi 5G

3.2 WiFi 2.4G

3.3 WireGuard

3.4 4G Modem Speed Test

3.5 5G Modem Speed Test

CHAPTER 4 ADVANCED SETTING

4.1 Login to web user interface

11-13

4.2 Web-console

14-16

4.3 Upgrade firmware

17-20

4.4 RS485/Modbus

21-23

CHAPTER 5 WIREGUARD REMOTE MANAGEMENT CONFIGURATION

5.1 Wireguard remote management configuration

5.2 Xatellite IoT WireGuard VPN Term in al Configuration

25-28

CHAPTER 1 INTRODUCTION

1.1 Specification

Xatellite IoT

Operation Voltage

12 ~ 24VDC, 2A

Operation Current

2.0 A (maximum)

Operation Temperature

-10 ~70°C

Humidity

Max. 98%

Dimension (LxWxH)

192x133x33mm

Weight

0.98 Kg

AC/DC Adaptor

Input Voltage

AC 100~240V, 50/60Hz

Input Current

0.7 A (typical)

Rated Output Voltage

12V DC

Rated Output Current

2.0 A

1.2 Packaging Items

Items

Quantity

Remark

Xatellite IoT

included

AC/DC Adaptor

included

WiFi Antennas

included

4G Antennas

subject to your order code

5G Antennas

subject to your order code

1.3 Product description of Xatellite IoT (Front)

FTY RST

Factory Restore Button

- Press this button more than 5 seconds will restore factory default configuration and

whole system reboot according

- Press this button will reboot whole system

SIM1

Micro SIM slot 1 (not included) (4G SIM card only)

SIM2

Micro SIM slot 2 (not included) (preferred slot) (4/5G SIM card available)

SIM1

LED for 4G Modem status indication

SIM2

LED for 4G or 5G Modem status indication

WiFi

LED for WiFi status indication

ALERT

LED for malfunction indication. Please note that this LED turns on during the system

reboot stage. It should be OFF during normal operation. Please consult for assist if this

LED turns on all the time.

PWR

Power indication. It turns ON all time once DC input power source is plugged in.

Micro SD card (not included)

1.4 Product description of Xatellite IoT (Back)

LAN

4 LAN 10/100/1000Mbps ports

WAN/LAN

The factory default setting is WAN 10/100/1000Mbps. It can be configurable to

LAN port if necessary

Spared Antenna BNC

jack

This is a spared 4G antenna BNC jack for the 4G modem if an additional 5G

modem is installed (dual-modems) will run out of sided antenna jacks. Please

note that 5G modem requires 4 antennas to work properly.

RS485 120Ω Terminator

Switch to position 0 to disable the termination resistor

Switch to position 1 to enable the termination resistor

RS485 bus signal ground

RS485 bus differential signal A

RS485 bus differential signal B

Alternative DC power input, negative

Alternative DC power input, position

DC power input from AC/DC Adaptor

1.5 Product description of Xatellite IoT (Sided)

The left and right sides of the device are for 4/5G and WiFi antennas respectively.

Notice: Antenna with needle is for 4/5G. Antenna without needle is for WiFi.

1.6 Product features

MOBILE

Number of Modules

2, support for “Two 4G(LTE)” or “One 5G with One 4G(LTE) “

Number of SIM

2, Full Size SIM slots

Configuration

Support for Modem Manager (default), USB net, QMI or PPP

WIRELESS

WiFi Radio Specification

Wi-Fi 5 dual radio, 5 GHz 2x2 MIMO and 2.4 GHz 2x2 MIMO

WiFi security

Support for WPA2, WPA3, WPA2/WPA3 Enterprise

SSID

Support for Multiple SSIDs

WiFi Operation Modes

Support for Multiple operation mode and access control on MAC address

ETHERNET

WAN

1 port (or configurable to LAN), 10/100/1000Mbps

LAN

4 ports, 10/100/1000Mbps

NETWORK

Protocols

IPv4/IPv6

Routing

static routing (optional dynamic routing for advanced user)

Firewall/NAT

port forward, traffic rules, NAT rules, custom rules

DDNS

Support for most popular service providers

MultiWAN3

Support for Fail-over or Load Balance

VPN

WireGuard (next generation VPN) or optional Ipsec or OpenVPN

QoS

Smart Queue Management, QoS over Nftables

Other

WiFi Scheduler

Services

DHCP Server, DNS forwarder, TFTP server, Static IP leases

ttyd

Websocket Terminal for professional administrator

RS485

Baud rate

300 ~ 921,600 bps (default 9600)

Protection

ESD +15KV, Lightning/Surge Protector by Gas Discharge Tube

Modbus Gateway

mbusd for RTU/TCP

Modbus Utility

Easy to use “mbpoll” tool for Modbus connection test

1 microSD(TF) card slot, optional for data storage, file format:

FAT32/exFAT/NTFS/EXT4, support for SSHFS

LoRa Gateway

optional, please consult our sales representative

LoRa Device

optional, please consult our sales representative

Watchdog

auto-reboot in case system crash

CHAPTER 2 NETWORK CONFIGURATION

2.1 Default AP

SSID: XLite_XXXX_2.4G & XLite_XXXX_5G

2.2 Default IP

Default: 192.168.1.1

WiFi/LAN: via DHCP sever

WAN: acquired IP address by DHCP client

2.3 Default User

User: root

Password: admin

2.4 Typical Network Topology

CHAPTER 3 SPEED TEST

3.1 WiFi 5G

Parameters

Station mode(STA)

AP mode

unit

Channel Width

MHz

Link speed

866

Mbps

Security

WPA2

Test Speed (peak)

471

530

Mbits/sec

3.2 WiFi 2.4G

Parameters

Station mode(STA)

AP mode

unit

Channel Width

MHz

Link speed

144

Mbps

Security

WPA2

Test Speed (peak)

106

105

Mbits/sec

3.3 WireGuard

iperf3 Server

Interface

iperf3 Client

GZHD (Wireless)

WWAN, China Telcom, EC20 (4G)

3.4 Mbps

GZHD (Wired)

WAN, broadband, limited to 30Mbps

30.5 Mbps

Local (Wired)

WAN, Desktop x86

112 Mbps

3.4 4G Modem Speed Test

ISP: China Telecom

Modem: 4G, EC20

3.5 5G Modem Speed Test

ISP: China Unicom

Modem: 5G, RM500U

CHAPTER 4 ADVANCED SETTING

4.1 Login to web user interface

1. Get access to Web User Interface either via WiFi or LAN. For the first time access, you will see the

security warning if you are using Google Chrome Browser:

Please click “Advanced” button, you will see

Indice

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza