Esse-ti HELPY COMPACT-TL Manuale utente

11/06/2020

Alarm system for elevators

compliant with the European Standard

EN 81-28:2018

HELPY COMPACT-TL

QUICK GUIDE

To download User guides in other languages

please scan the QR-code or visit

https://www.esse-ti.it/en/manuals

Page 2 DESCRIPTION

DESCRIPTION

Autodialer specifically designed for installation on car roof.

A Internal power-supply connector

B Built-in backup battery connector

C Reset pushbutton

D Serial port for PC connection

E Alarm pushbutton

F Built-in loudspeaker connector

G Micro SD card slot

H Battery compartment

I Jumper J16 for define the behaviour of output AI

Jumper J17 for define the behaviour of output AR

L Built-in microphone

M Terminal blocks

DESCRIPTION Page 3

LEDs

LED signalling alarm / periodical test call (yellow)

(not used)

LED signalling device status (red)

LED signalling power supply status (blue)

Terminal blocks

+Power supply input (12 Vdc - 30 Vdc)

—Negative

AI Given alarm indicator light (12 Vdc or 0 Vdc via jumper J16)

AR Received alarm indicator light (12 Vdc or 0 Vdc via jumper J17)

+12 12 Vdc output (max. 100 mA)

C Common terminal(1) for inputs AL1 and IN1

—Negative

AL1 Alarm input(2)1

AL2 Reset input(3)2 (freely programmable)

IN1 Filter input(2)(freely programmable)

ALT2 Output for connecting loudspeaker of passive speaker unit (car or

bottom of elevator car)

MIC2 Input for connecting microphone of passive speaker unit or single

microphone (car or bottom of elevator car)

MIC3 Input for connecting microphone of passive speaker unit or single

microphone (car or bottom of elevator car)

—Negative

TEL Local telephone

RL1 NO Relay (normally open contact)

RL1 C Relay (common contact)

Ground terminal for PSTN-line

LTI PSTN-line or universal gateway input

LTO Output for domestic telephone line

RL1 NC Relay (normally closed contact)

Page 4 DESCRIPTION

S Output for connecting loudspeaker of long range speaker unit (pit)

M1 Input for connecting microphone of long range speaker unit (pit)

M2 Input for connecting microphone of long range speaker unit (pit)

—Negative

AL1 Alarm input(2) 1

—Negative

AL1 Alarm input(2) 1

(1) :can be connected to a block –, to the block +12 or to an external reference

(2) :allows to connect voltage free contact pushbuttons (NO or NC) or powered pushbuttons

(3) :allows to connect voltage free contact (NO or NC)

CONNECTING THE SPEAKER UNITS Page 5

CONNECTING THE SPEAKER UNITS

Helpy Compact-TL comes with a built-in speaker unit.

It is also possible to connect to the Helpy Compact-TL up to 2 passive speaker

units or cables with microphone and up to 2 long range speaker units.

Passive speaker units or cables with microphone can be installed in the car and

at the bottom of elevator car. A long range speaker unit must be installed in the

pit when required.

Make the connections as shown in the table below:

TERMINAL BLOCKS

HELPY COMPACT-TL

TERMINAL BLOCKS

MAX.

DISTANCE

PASSIVE

SPEAKER

UNIT

ALT2

6 m

(with shielded cable)

MIC2 or MIC3

–

CABLE WITH

MICROPHONE

red wire

MIC2 or MIC3

cable length

(3 m)

white wire

–

LONG RANGE

SPEAKER UNIT

50 m

M1 or M2

–

Page 6 CONNECTING THE EMERGENCY CALL BUTTONS

CONNECTING THE EMERGENCY

CALL BUTTONS

Connect, following one of the diagrams shown below, the pushbuttons.

Car pushbutton

It is possible to connect (inside the elevator car) voltage free contact

pushbuttons or powered pushbuttons.

Voltage free contact pushbuttons

Powered pushbuttons (12-24 Vdc) – 2 solutions

CONNECTING THE EMERGENCY CALL BUTTONS Page 7

Other pushbuttons

The pushbuttons of pit and bottom of elevator car can only be connected to an

AL1 terminal block if they are of the same type as the car pushbutton (voltage

free or powered, normally open or normally closed).

The pushbuttons of pit and bottom of elevator car can only be connected to

AL2 terminal block if they are voltage-free.

Note: the reset input (AL2) must be configured as alarm input with

the “Inputs setting” programming (codes 390 or 55).

Page 8 CONNECTING THE FILTER INPUT

CONNECTING THE FILTER INPUT

Connect, following one of the diagrams shown below, the filter contact.

CONNECTING THE INDICATOR LIGHTS Page 9

CONNECTING THE INDICATOR

LIGHTS

The GIVEN ALARM INDICATOR LIGHT (yellow) switches on after pressing

the emergency button to indicate the beginning of the alarm procedure. The

RECEIVED ALARM INDICATOR LIGHT (green) switches on when the

alarm call is answered.

Connect, following one of the diagrams shown below, the external

indicator lights to the Helpy Compact-TL.

Output 12 Vdc (factory setting)

Output 0 Vdc

Page 10 OTHER CONNECTIONS

OTHER CONNECTIONS

CONNECTING THE TELEPHONE LINE

PSTN line or universal gateway (2G/3G/4G)

Connect the ground terminal (indicated by ), to a ground socket in

order to increase the PSTN line protection.

Connect the telephone line to LTI terminals.

CONNECTING THE LOCAL TELEPHONE

Connect the local telephone (for programming and managing the

device) to TEL and – terminals (irrespective of the polarity).

CONNECTING THE RESET CONTACT

It is possible to use a voltage free contact (NO or NC).

Connect the reset contact to AL2 and – terminals.

CONNECTING THE RELAY

Connect the external contact to RL1 NO (or RL1 NC) and RL1 C

terminals.

REPLACING BATTERY

ATTENTION

Only use replacement batteries supplied by Esse-ti.

Indice

Altri manuali Esse-ti Sistema di sicurezza

Esse-ti

Esse-ti HELPY COMPACT-Q Manuale utente

Esse-ti

Esse-ti Helpy 2W G Series Manuale utente

Esse-ti

Esse-ti HELPY 2W-V BASIC Manuale utente

Esse-ti

Esse-ti Helpy L200 Manuale utente

Esse-ti

Esse-ti HELPY 2W-LCP Manuale utente

Esse-ti

Esse-ti HELPY 2W-L300 Manuale utente

Esse-ti

Esse-ti Helpy GSM Manuale utente

Esse-ti

Esse-ti Helpy L200 TL Manuale utente

Esse-ti

Esse-ti Helpy L300 Manuale utente

Esse-ti

Esse-ti Helpy GSM-RM Manuale utente

Esse-ti

Esse-ti HELPY CONTROLLER DIN Manuale utente

Esse-ti

Esse-ti HELPY QUICK INTL Manuale utente

Esse-ti

Esse-ti Helpy GSM Manuale utente

Esse-ti

Esse-ti HELPY 2W-Q Manuale utente

Esse-ti

Esse-ti HELPY COMPACT Series Manuale utente

Esse-ti

Esse-ti ST56 GMV Manuale utente

Esse-ti

Esse-ti HELPY 2W-V BASIC Manuale utente

Esse-ti

Esse-ti HELPY 2W-TL Manuale utente

Esse-ti

Esse-ti HELPY COMPACT Manuale utente

Esse-ti

Esse-ti Helpy Oops Manuale utente

Esse-ti

Esse-ti Helpy Star Manuale utente

Esse-ti

Esse-ti Helpy GSM-RM Manuale utente

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente