Essence Care Home Manuale utente
Care@Home™
Camera Detector
User Guide
ESUGSC006
Version 2.0
July 2017
Table of Contents
2 Care@Home™ Camera Detector User Guide
Table of Contents
1. Overview.................................................................................................................................................3
2. Installing the IPD.................................................................................................................................... 4
2.1. Determining the Best Location.................................................................................................. 4
2.1.1 Basic Location Requirements ....................................................................................... 4
2.1.2 Locations to Avoid ....................................................................................................... 6
2.2. Checking if a Pet Immune Lens is Required................................................................................ 8
2.3. Setting Up the IPD...................................................................................................................... 8
2.4. Conducting a Walk Test ............................................................................................................ 15
3. Operating the IPD..................................................................................................................................17
3.1. Notifications ............................................................................................................................. 17
3.2. Supervision ............................................................................................................................... 17
3.3. Configuring the IPD .................................................................................................................. 17
4. Replacing the Battery............................................................................................................................ 18
5. Specifications........................................................................................................................................20
Appendix A Installation Method Alternatives........................................................................................ 22
Using Mounting tape............................................................................................................................22
Using Screws.........................................................................................................................................22
Required Equipment .................................................................................................................23
Installing the IPD with Screws ...................................................................................................23
Overview
Care@Home™ Camera Detector User Guide 3
1. Overview
The Essence Camera Detector (IPD) is a battery operated, bi-directional, wireless device combining
the functionality of a passive infrared (PIR) motion detector with a high-resolution, full-color, JPEG-
image-capturing camera.
Figure 1: Essence Camera Detector
Installing the IPD
4 Care@Home™ Camera Detector User Guide
2. Installing the IPD
To install the IPD:
Ensure you have three 1.5 V AA alkaline batteries
NOTE: To comply with the UL certification standards, use GP International Ltd.
batteries.
Determine the best location
Check if a pet immune lens is required
Set up the IPD
Conduct a walk test
2.1. Determining the Best Location
When selecting a mounting location for the IPD, it is important to take account of:
Basic location requirements
Locations to avoid
2.1.1 Basic Location Requirements
The mounting location should be:
A flat wall surface or a corner in a room
Installing the IPD
Care@Home™ Camera Detector User Guide 5
A surface that is clean, dry, and smooth
At a height of 2 to 2.2 m (6.6 to 7.2 ft.)
Within 400 m (1,312 ft.) of the control
panel (CP)
NOTE: The IPD has a maximum detection range of 12 m (40 ft.), and maximum
detection angles of 105° horizontal, and 80° vertical.
Installing the IPD
6 Care@Home™ Camera Detector User Guide
2.1.2 Locations to Avoid
The mounting location should not be:
On a door frame.
Where objects obscure the coverage
area, even partially. For example,
bookcases or cabinets.
A location that has moving objects in the
coverage area. For example, curtains or
light fixtures with hanging parts.
Installing the IPD
Care@Home™ Camera Detector User Guide 7
Directly in front of an air conditioner or
heat source.
Directly opposite a door.
For example, if the IPD is installed facing
the door, when the resident passes the
open door through the hallway, the IPD
sends an event to the CP reporting
incorrectly that the resident is entering
the bathroom.
A location that has overlapping coverage
areas with another IPD or motion
detector. Overlapping coverage can
cause false detection reporting. Separate
coverage areas ensure distinct
identification of the activity area for each
detector.
Installing the IPD
8 Care@Home™ Camera Detector User Guide
2.2. Checking if a Pet Immune Lens is Required
If there are pets on the premises, it is important to differentiate between the movement of the
resident and the movement of the pet by using a pet immune lens.
Instructions for fitting a pet immune lens are included in 2.3 Setting Up the IPD on page 8.
The following figure shows the pet immune lens.
Figure 2: Pet Immune Lens
2.3. Setting Up the IPD
To setup the IPD:
1. Identify the location for mounting the IPD. Refer to 2.1 Determining the Best Location on page 4.
2. Clean the surface of the mounting location thoroughly.
3. Release the IPD mounting base by lifting the tab and pushing it forward.
Figure 3: Release the Mounting Base
1
2
Installing the IPD
Care@Home™ Camera Detector User Guide 9
NOTE: Refer to Using Screws on page 22, for information about installing the IPD
using screws.
4. Peel off the protective strips from the mounting tape required for the installation location.
Figure 4: Peel Off the Protective Strips
5. Press the mounting base into place, ensuring it is the right way up.
Figure 5: Put the Mounting Base the Right Way Up
For installing in
a corner
For installing on
a flat wall
Top
Bottom
Installing the IPD
10 Care@Home™ Camera Detector User Guide
6. Remove the battery cover, by pressing the tab and pushing the cover up and out.
Figure 6: Remove the Battery Cover
7. If the IPD does not require a pet immune lens, skip ahead to step 16 on page 14.
8. If the IPD does require a pet immune lens, unscrew the two screws above the battery
compartment at the top of the back cover.
Figure 7: Unscrew the Screws
9. Detach the back cover from the front panel.
Tab
Altri manuali per Care Home
9
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Essence Sensore di sicurezza
