b. Block the lens 63
IV. MODIFYING THE LENS SHAPE 65
1. Menu screen 66
2. Modifying a shape 67
a. Enlarging, reducing or rotating a shape 67
b. Free-form modification 70
c. Retouching a shape 71
3. Archiving / saving a shape 72
V. PREPARING A DRILLED JOB 73
1. Legend screen 75
2. Configuring a drilling point 78
a. Creating a drilling point 78
b. Delete one drilling point 79
c. Dimensioning a drilling point 79
d. Adjusting the position of a drilling point 80
3. Drilling models 83
a. Importing a model 83
b. Saving a model 84
VI. PREPARING LENS EDGING 87
1. Menu screen 88
2. Edging configuration 90
VII. TRACER-CENTERER-BLOCKER CONFIGURATION 91
1. Configure the tracer-centerer-blocker 92
a. Time, date and language 92
b. Options 93
c. Connections 94
d. Screensaver and brightness of the work area 95
2. Customize the tracer-centerer-blocker, 96
a. orking modes and display precision 97
b. Decentration mode 98
c. Action bar 99
d. Brightness 101
3. Restoring the factory settings 102
VIII. MAINTENANCE & SERVICING 103
1. Carrying out the autotests 104
2. Check and calibrate (remote lens edging option) 105
a. Check and calibrate the tracing table (option) 105
b. Check and calibrate the blocking arm 108
c. Calibrate the touch screen 110
3. Make a backup of the jobs and display configuration 110
4. Statistics and technical history 113
a. Tracer-centerer-blocker statistics 113
b. Technical log and errors 114
5. Maintain and clean the tracer-centerer-blocker 115
a. Precautions required 115
b. Cleaning the centering chamber glass 115
