Estella 348SM20 Manuale utente
11/2021
348SM20
20 Qt.
348SM30
30 Qt.
SPIRAL MIXERS
WITH GUARDS
USER MANUAL
Important Safety Informaon .....................................2
Operaon ..........................................................3
Specificaons & Capacies ........................................4
Cleaning ...........................................................4
Circuit Diagram ....................................................5
Troubleshoong ...................................................6
Limited Warranty ..................................................7
INDEX
1.
When using electrical appliances, basic safety precauons should always be followed,
including the following:
1. Keep the working around surrounding the machine clean and organized.
2. Consider environmental condions surrounding the machine. Do not use the machine in humid,
wet or poorly lit environments. Do not use the machine close to flammable liquids or gas.
3. Keep machine away from children and non-authorized personnel. Do not permit them to go near
the machine or its working area.
4. Do not touch the switch or cable with wet hands.
5. Only ulize the machine with the correct voltage to achieve opmum results.
6. Do not wear low-hanging clothing or items that may get caught in the machine. Wear non-slip
shoes while working with the machine. For hygiene and safety, keep hair ed back and wear
protecve gloves.
7. Do not tug on the cable to remove the plug from the outlet. Do not leave the cable near sharp
objects, water or solvents.
8. Remove the plug when you are cleaning the machine or need to movethe machine.
9. Check that the machine is not damaged prior to each use. Carefully check that all safety devices
are working, that the removable parts are not blocked, there are no parts damaged, that all the
parts have been set up correctly and that all condions that could influence the regular funcon
of the machine are in working order.
10.If the machine is damaged or there are issues during its use, turn off the machine immediately
and contact the manufacturer for assistance or repair. Repairs should only be made by qualified
technicians, using the correct manufacturer parts. Non-compliance with these rules may void
the warranty.
NOTE: Save these instrucons for future reference.
SAFETY
2.
3.
1. Before use confirm the power supplied to the unit is correct. Run the machine empty
for a few seconds to confirm that no moving parts are colliding and there is no abnormal
noise. Failure to do so may cause damage to your machine and void the warranty.
2. In a clean bowl first add water, then flour. Return the protecve cover to the closed and
locked posion.
3. Startup steps:
a. Once the bowl guard is in place, set the me (12-15 minutes is recommended for
most applicaons).
b. The emergency stop buon will pop up. Do not operate the machine if the emergency
stop buon does not funcon.
c. Press the green buon to start slow speed mixing.
d. Aer the water and flour are incorporated, press the red stop buon followed by
the yellow buon to start high speed mixing. The machine will automacally stop
when the mer runs out.
NOTE: As a safety feature, the bowl guard must be down in posion in order for the dough mixer
being able to operate. If the guard is lied up, the mixer will not run.
OPERATION
STOP
SLOW HIGH
TIMER
LOW SPEED START BUTTON HIGH SPEED START BUTTON
STOP BUTTON
EMERGENCY STOP BUTTON
TIMER
1. Cover the safety guard and turn right to pop up the emergency stop button;
2. The setting time is generally 12-15 minutes to mix the dough;
3. Press the low-speed start button to start the machine;
4. When the flour and water are evenly mixed, press the stop button, and then press the
high-speed start button to start fast mixing, and when the set time is reached, the machine
will automatically stop working.
5. When the machine is working, open the safety guard and the machine will automatically
stop working; you need to press the high-speed start button or low-speed start button again
LOW SPEED
START BUTTON
HIGH SPEED
START BUTTON
TIMER
STOP
BUTTON EMERGENCY
STOP BUTTON
4.
SPECIFICATIONS
& CAPACITIES
348SM20 348SM30
Bowl Capacity 20 QT. 30 QT.
Flour Capacity 17.5 LB. 27.5 LB.
Minimum Flour Capacity 5.25 LB. 8.25 LB.
Dough Capacity (60% AR)* 32 LB. 55 LB.
Voltage 120V 120V
1500W 1500W
Horsepower 2HP 2HP
Phase Single Single
Mixing Speed (Low) 112 RPM 112 RPM
Mixing Speed (High) 198 RPM 198 RPM
Machine Weight 200 LB. 220 LB.
*For best performance, it is recommended to use the mixers at least at 30% capacity.
*When mixing dough (pizza, bread, or bagels), check your "AR" absorpon rao - water weight divided
by flour weight. The above capacies are based on 12% flour moisture at 70°F water temperature.
If high gluten flour is used, reduce above dough batch size by 10%.
Example: If recipe calls for 6 lb. of water and 10 lb. of flour, then 6 divided by 10 = 0.6 (60% AR).
CLEANING
1. Aer removing dough from the bowl, turn off the power and unplug the machine
2. Use a cloth with a mild detergent and warm water to clean the inside of the bowl. Make sure to
clean the spiral hook and auxiliary rod.
3. Use a clean cloth soaked in warm water to rinse the inside of the bowl. Try to avoid geng excess
amounts of water inside the bowl.
4. Use a dry clean cloth to remove excess water and dry the machine.
NOTE: Cleaning should be done at the end of every work day and when switching between batches
of product.
NOTE: It is NOT advised to remove the aachments from this unit.
CIRCUIT DIAGRAM
5.
TROUBLESHOOTING
Issue Cause
The axles can't work when
operang the machine
Poor contact of the electrical
equipment into the outlet
The mixing bowl is out of
posion Moving direcon is not correct Check to see that everything is
aligned correctly
Leaks oil Sealing washer is damaged Replace the sealing washer
up and down Slideway is dirty or rusted Clean and lubricate the slideway
The motor is overheated
and the speed is down
The voltage is not high enough, or
the incorrect speed is set for the
thickness of dough
Check the voltage or use a lower
speed
Noisy and overheang Poor lubricaon Add or change lubricaon to moving
parts
Mixer touches bowl The mixing device or bowl is
deformed
Repair or change the bowl or mixing
device
Machine trips the breaker
and does not turn on again.
Other machines in the kitchen
start or work at the same me,
resulng in voltage instability or
protecon switch pops up.
1. Unscrew and open the lid.
2. Press the overload protecon
switch (reset buon).*See below
3. Install the lid, plug it back in, and
turn on the machine.
*Overload
Protecon
Switch
6.
Altri manuali per 348SM20
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Estella Miscelatore
