Installer's manual IGNEO touc
Chapter 1. Safety
ATTENTION! Electrocution risk!
Turn off power on t e electric switc board before assembly or disassembly.
Carefully read t e instruction before use.
Keep t e instruction manual and consult it w en using t e device.
Abide by t e rules of use and warnings written in t e instruction manual.
C eck if t e device isn't dammaged. W en in doubt, don't use t e device and contact t e retailer.
If you encouter situations not mentioned in t e instruction manual, or you are in doubt about safe usage
of t e device, please contact t e retailer.
Pay attention to any warning symbols on t e device or packaging.
T e device must be used in accordance wit intended use.
T e device is not a toy, keep out of c ildrens reac .
Under no circumstances allow c ildren to play wit any part of t e packaging.
Keep small parts (screws, wall plugs etc.) away from c ildren. Small elements supplied wit t e device can
be a c oking azard.
Do not modify mec anical or electrical parts of t e device. It can result in abnormal functioning,
malfunctions, errors and failure to comply wit regulations.
Do not put anyt ing into any openings in t e device. It can cause s ort circuits, electric s ock, fire or
complete destruction of t e device.
Do not allow t e device to come in contact wit water, moisture or dust. It can cause s ort circuits,
electric s ock, fire or complete destruction of t e device.
After turning off t e device using touc panel, it can still be under power.
T is regulator is designed as a part of a boiler, not a standalone device.
T is device requires a proper ventilation. Do not cover any ventilation oles to assure a proper air circulation.
For inside use only, unless stated ot erwise.
Do not expose to impacts or vibrations.
Before installing verify if electrical grid parameters are wit in specifications.
To ensure electric s ock protection, verify t at t e device is grounded. It must be connected wit a 3 pin
socket. T e power socket must be installed by an aut orized electrician.
Verify if t e device will not cause power grid overload. Do not connect t e device to a circuit containing
electric motors and ot er impulse disruption sources (freezers, was ing mac ines etc.)
Before connecting any wires or external devices, turn off mains supply.
To completely turn off t e device, pull t e plug out of t e socket. Especially if it will not be used for an
extended amount of time.
T e power cord must be protected from damage. It must not be stepped on and no objects s ould be
placed on it.
T e regulator must be installed by t e boiler producer. Any electrical connections must comply wit
circuit diagrams and local standards and regulations.
Additional safety devices must be used to protect t e boiler and eating elements from eventual regulator
4www.estyma.pl
EGM-ENG-I 20171123
