Eta TWIN Guida rapida

2017-09-07

0000000293

V.003

X.41.0

93413-001 TWIN pellet burner

20-26 kW

Configuration

ETA Heiztechnik

Gewerbepark 1

A-4716 Hofkirchen an der Trattnach

Tel: +43 (0) 7734 / 22 88 -0

Fax: +43 (0) 7734 / 22 88 -22

info@eta.co.at

www.eta.co.at

Contents

1 General information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2 Description of the configuration wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3 Checking outputs, changing terminal assignments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3.1 Changing the access level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3.2 Setting manual mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3.3 Modify terminal assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

4 Backing up and restoring a configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

5 Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

5.1 Example with solar heating system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

5.2 Example with solar heating system and stratified charging module . . . . . . . . . . . . . . . . . . . . . . . . . . 16

5.3 Resuming commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

6 Configuration parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

6.1 [TWIN] function block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

6.2 [Boiler] function block – log boiler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

6.3 [Buffer] function block – TWIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

6.3.1 Basic settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

6.3.2 Buffer with solar heating system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

6.3.3 Buffer as a combination tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

6.4 [Hot water tank] function block – SH & TWIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

6.5 [Heating circuit] function block – SH & TWIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

6.5.1 Basic settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

6.5.2 Heating circuit with room sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

6.5.3 Screed drying. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

6.6 [Solar] function block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

6.7 [Fresh water module] 2 pumps function block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

6.8 [Pellet store] function block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

6.9 [Pellet store with switch unit] function block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

4 www.eta.co.at

General information

1 General information

All contents of this document are property of ETA

Heiztechnik GmbH and are protected by copyright.

Any reproduction, transfer to third parties or use for

other purposes is prohibited without written permission

from the owner.

Subject to technical changes

We reserve the right to make technical modifications

without notice. Printing and typesetting errors or

changes of any kind made in the interim are not cause

for claims. Individual configurations depicted or

described here are only available optionally. In the

event of contradictions between individual documents

regarding delivery scope, the information in our current

price list applies.

Software Description

The software version described in this documentation

corresponds to the version valid at the time of publica-

tion. The software version installed on your product

may differ from that described in this documentation.

A software update to a more recent version can

always be performed. With the appropriate au-

thorisation, the required files can be found at

"www.eta.co.at".

Explanation of symbols

Instructions and information

Layout of safety instructions

SIGNAL WORD!

Type and source of danger

Possible effects

• Measures for avoiding the danger

Types of safety instruction

CAUTION!

On non-compliance withthis safety instruction, there is

a risk of material damage.

WARNING!

On non-compliance withthis safety instruction, there is

a risk of physical injury.

DANGER!

On non-compliance with this safety instruction, there is

a risk of major physical injury.

Description of the configuration wizard

2 Description of the configuration wizard

Configuration with the wizard

Configuration with the wizard takes place in several

steps. These are described below:

1) Add the function blocks required for the installed

heating system components. Choose your settings

and options individually in each function block.

2) When you have added all the necessary function

blocks, set the individual connections between

"producers" and "consumers".

"Producers" are components that provide heat or

fuel. "Consumers" consume this heat or fuel.

3) Next, the terminal assignments of each function

block is displayed on the corresponding circuit

board. In this step, the heating system

components are electrically connected. You may

also adjust the terminal assignments during this

step.

4) Finally, the configuration is installed, and the

software rebooted.

After this, you can make customer-specific

adjustments to the heating system, such as: buffer

charging times, room temperatures for the heating

circuit, hot water temperatures, etc.

When you have completed these customer adap-

tations, save this configuration. It is saved in the

ETAtouch control system. You can additionally save it

on a USB stick.

The description below explains the general way

in which the configuration wizard works. Your

heating system's individual configuration depends on

the installed components, and can vary.

Starting the configuration assistant

In the system settings, increase the authorization

to [Service], and open the system configuration menu

with the [Systems configuration] button.

Fig. 2-1: System configuration menu

Start the configuration assistant with the [Starting

the assistant] button.

Function block overview

The [Possible function blocks] column shows the

function blocks available for selection, and the

[Selected function blocks] column shows the function

blocks that have already been added.

Fig. 2-2: Function block overview

1 Function blocks available for selection

2 Type and node number of circuit board

3 Add a function block

4 Function blocks already added

5 Next step of configuration

6 End configuration

7 Delete an added function block

8 Show the options of an added function block

Press the button to see the options and settings for

an added function block. With the button function

blocks that have already been added can be deleted.

Adding another function block is quick and uncompli-

cated. In this example, the [Heating circuit] function

block is used to explain the process. Select the

function block from the [Possible function blocks]

column, and then press the button.

6 www.eta.co.at

Description of the configuration wizard

A window opens showing the function block's settings.

Adjustments may be necessary, depending on the

installed heating system components.

Fig. 2-3: Function block settings

1 Possible selections

2 Display information

3 Show function block options

Press a row to select it. Press the button to see the

information. Press the [Options] button to view the

function block options.

Fig. 2-4: Function block options

1 Function block options

2 Show function block settings

3 Save options and settings

Select the required options, depending on your

installed heating system components, and save

with the [Accept] button.

The function block has been added and appears in the

overview screen in the [Selected function blocks]

column. Add further function blocks in the same way.

Continue the configuration by pressing the [Next]

button.

Connections overview screen

In this window, you can determine the individual

connections between producers and consumers.

Fig. 2-5: Connections overview screen

1 Overview of created connections

2 Possible producers

3 Possible consumers

4 Delete selected connection

5 Create a new connection

You can create a connection by pressing [New connec-

tion]. The choice of possible connections shown

depends on the previously selected function blocks,

options and settings:

• [Heating water]: For all connections between

producers and consumers that are connected via

the heating water.

• [SolarMedium]: For all solar heating system con-

nections.

• [Pellets]: For all pellet fuel system connections.

• [Woodchips]: For all wood

chip fuel system connections.

• [Ash]: For all de-ashing system connections.

• [SH-Twin]: For the connection between log boilers

and TWIN pellet burners.

• [Indv. room]: For all individual room control con-

nections.

Select the type of connection you require, then tap the

necessary producers and consumers to select them.

This connection then appears in the [Connections]

window.

Description of the configuration wizard

When you have set up all the necessary connections,

press [Next] to continue configuration.

Terminal allocation overview screen

The terminal allocations for the individual heating

system components are shown in this window.

Fig. 2-6: Terminal allocation overview screen

1 Overview of added function blocks

2 Terminal allocations of individual components of

the selected function block

All configured function blocks for the individual circuit

boards are listed in the [Selected function blocks]

window. When you select a function block, its assigned

terminal allocation is shown in the window below. In

this step, the individual components are connected to

the respective terminals on the circuit board.

Once all components have been connected, press the

[Next] button to continue configuration.

You can already change the terminal allocations

in this step. The next section explains how to

change the terminal allocation for the temperature

sensor of the hot water tank.

Changing terminal allocation

1. In the function block of the hot water tank, tap the

temperature sensor [Hot water tank] twice. A

window opens.

Fig. 2-7: Example: Changing terminal allocation

1 Current terminal allocation

2 Available terminals, the factory setting is

highlighted

3 Delete current terminal allocation

4 Allocate new terminal allocation

5 Close window

2. In the upper window, select the terminal and press

[Disconnect] to delete the current terminal

allocation.

3. After this, select a free terminal in the lower

window and allocate the new allocation by

pressing [Connect]. Finish by closing the window

with the [Close] button.

Installing a configuration

Finish by pressing [Apply] to install the configuration.

The configuration will then be adopted and the

software restarted.

8 www.eta.co.at

Changing the access level Checking outputs, changing terminal assignments

3 Checking outputs, changing terminal assignments

3.1 Changing the access level

Setting the [Service] access level

For setting some parameters, the [Service] access

level is required. To do this, open the system

preferences and tapthe[Authorisation] symbol.

A settings window appears. Enter the password "135"

and press [Accept the authorisation] to confirm.

3.2 Setting manual mode

Switching on an output manually

The terminal assignment of the individual components

of the selected function block are displayed in the

inputs and outputs menu, e.g. pumps, temperature

sensors, and mixers. In this menu, these can be

activated manually (manual mode), for example, to

check their function.

In the example below, the heating circuit pump of the

heating circuit is started manually.

The heating circuit pump is started manually

1. Increase the authorisation to [Service]. See

Chapter 3.1 "Changing the access level".

2. Select the heating circuit and change the inputs

and outputs in the menu by tapping on the

symbol, followed by the symbol. The overview

screen opens.

Fig. 3-1: Overview

3. In the heating circuit pump, tap on the symbol.

A settings window appears. With the [On] button,

the pump is turned on manually, and turned off by

pressing the [Off] button.

Fig. 3-2: Settings window

4. If the pump is switched on manually, the [On]

button will light up yellow to confirm. In addition,

the name of the function block is displayed in red.

Fig. 3-3: Manual mode is activated

In manual mode, the [Automatic] button appears. It

is used to switch off manual mode, and automatic

mode is again started by the ETAtouch control

system. You can close this setting window with the

arrow on the left side, even if manual mode is still

active.

After a period of 30 minutes the ETAtouch

control system automatically reverts all

manually switched on outputs back to automatic

mode.

In the same manner, the running direction of a mixer is

checked. See the example below.

Checking outputs, changing terminal assignments Modify terminal assignment

Running direction of the heating circuit mixing

valve

1. With the [Service] authorization, open the inputs

and outputs menu in the heating circuit function

block. On the heating circuit mixing valve, tap the

symbol. The current status and position is

displayed.

2. The mixer can be opened and closed with the

[Forward] and [Back] buttons. Pressing the [Stop]

button keeps it in its current position.

3.3 Modify terminal assignment

Modify terminal assignment

The terminal assignment of the individual components

of the selected function block are displayed in the

inputs and outputs menu, e.g. pumps, temperature

sensors, and mixers. In this menu, the terminal

assignment can be changed.

In the example below, the terminal assignment of the

heating circuit pump is changed.

Modify terminal assignment of the heating circuit

pump

1. Increase the authorisation to [Service]. See

Chapter 3.1 "Changing the access level".

2. Select the heating circuit and change the inputs

and outputs in the menu by tapping on the

symbol, followed by the symbol. The overview

screen opens.

Fig. 3-4: Overview

3. In the heating circuit pump, tap on the symbol.

The current terminal assignment is shown in the

upper area at [Current terminal assignment].

Fig. 3-5: Terminal allocation overview screen

The current allocation is erased with the button.

Next, select a free terminal from the [Available

terminals] list, and assign it using the button.

The changed allocation is displayed in the upper

area at [Current terminal assignment].

10 www.eta.co.at

Modify terminal assignment Checking outputs, changing terminal assignments

The factory terminal allocation is shown in the

[Available terminals] list with a yellow font

colour.

Fig. 3-6: Factory setting (yellow font)

Indice

Altri manuali eta Bruciatore

eta

eta SH 20P Manuale utente

Manuali Bruciatore popolari di altre marche

Riello

Riello RS 28/M Guida rapida

True Induction

True Induction TI4B Manuale utente

Weishaupt

Weishaupt WG20 Series Manuale utente

Carolina Cooker

Carolina Cooker M116672 Manuale utente

Riello

Riello RX 500 S/PV Manuale di istruzioni

Unigas

Unigas HTP2000 Manuale utente

baltur

baltur BT 250 DSG 4T Manuale utente

muenkel design

muenkel design round burner Manuale utente

Ecoflam

Ecoflam Multicalor 170.1 Manuale utente

baltur

baltur BT 14 DSGW Manuale utente

artisan

artisan Art-SB1 Guida

Riello

Riello P 140 T/G Guida rapida

AESYS

AESYS TurboFire II Manuale utente

Riello

Riello RG1RKD Guida rapida

IKEA

IKEA GRILLSKÄR Manuale utente

RUSTA

RUSTA SAREK Manuale utente

PROPOINT

PROPOINT 8933657 Manuale utente

baltur

baltur TBL 1000 ME Manuale di riferimento

eta TWIN Guida rapida

Manuali Bruciatore popolari di altre marche