4 D4 Series Drivers Installation Guide
System Overview
ArcSystem Pro One-Cell luminaires require an external driver.
Models are available to meet your installation requirements. This guide covers the products
listed below.
ArcSystem Pro One-Cell
external D1 Series or D4 Series driver
required
ideal for short/medium throw
25 W full load power consumption
fixed version recessed/flush mount only
adjustable version recessed/flush mount
with two-axis tip and tilt
yoke-mount version with single-axis tilt
beam angle options: 18°, 30°, 50°
ArcSystem Pro One-Cell Small
external D1 Series or D4 Series driver
required
ideal for short/medium throw
25 W full load power consumption
adjustable version recessed/flush mount with
single-axis tilt
yoke-mount version with single-axis tilt
beam angle options: 19°, 24°, 37°, 60°
ArcSystem Pro One-Cell High Output
external D1 HO driver required
ideal for long throw
100 W full load power consumption
fixed version recessed/flush mount only
adjustable version recessed/flush mount
with two-axis tip and tilt
yoke-mount version with single-axis tilt
beam angle options: 18°, 30°, 50°
ArcSystem Pro One-Cell Micro
external D2 driver required
ideal for short/medium throw
20 W full load power consumption
adjustable version recessed/flush mount with
two-axis tip and tilt
yoke-mount version with single-axis tilt
beam angle options: 19°, 24°, 37°, 60°
Note:
The ArcSystem Pro One-Cell Micro is not available in 5000 K or Fade to Warm
variants. The ArcSystem Pro One-Cell High Output is not available in 3500K, 4000K,
5000K, or Fade to Warm variants.
ArcSystem Pro multi-cell luminaires are covered in the
ArcSystem Pro Multi-Cell
RDMInstallation Guide
and
ArcSystem Pro Installation Manual
. All ETCmanuals are available
for download free of charge at etcconnect.com.
