ETC Unison Echo Astronomical TimeClock Foglio di istruzioni

Part Number: 7186M1230-2.0.0 Rev: A

Released: 2016-09

Unison Echo®

Astronomical TimeClock

Configuration Manual

Software Version 2.0

ETC

, Sensor

, Unison Echo

, and EchoConnect

™

are either

registered trademarks or trademarks of Electronic Theatre

Controls, Inc. in the United States and other countries.

All other trademarks, both marked and not marked, are the

property of their respective owners.

Table of Contents i

Table of Contents

Overview . . . . . . . . . . . . . . . . . . 1

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Warnings and Notice Conventions. . . . . . . . . . . . .2

Contacting ETC . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Ambient Environment. . . . . . . . . . . . . . . . . . . .4

Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Electrical Requirements. . . . . . . . . . . . . . . . . . .4

Mounting Requirements. . . . . . . . . . . . . . . . . .6

Echo Control System . . . . . . . . . . . . . . . . . . . . . . . .7

E-ATC installed in an Echo Room Controller . .7

E-ATC with External 24 Vdc Auxiliary Power. .7

E-ATC with Echo Station Power Module with Aux8

Installation and Setup . . . . . . . 9

Connect the Wiring. . . . . . . . . . . . . . . . . . . . . . . . .9

Install the E-ATC into the Back Box . . . . . . . .11

Install the Faceplate . . . . . . . . . . . . . . . . . . . .12

User Interface Overview. . . . . 13

Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Status Display . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Timed Hold. . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Indefinite Hold. . . . . . . . . . . . . . . . . . . . . . . . .15

Recall Preset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Main Menu . . . . . . . . . . . . . . . 16

Schedule Events. . . . . . . . . . . . . . . . . . . . . . . . . . .16

ii Echo TimeClock Configuration Manual

Auto Timed Hold . . . . . . . . . . . . . . . . . . . . . . .17

Schedule an Event . . . . . . . . . . . . . . . . . . . . . . . . .17

Open/Close Settings . . . . . . . . . . . . . . . . . . . . . . .18

Timeclock Settings. . . . . . . . . . . . . . . . . . . . . . . . .19

Change Current Time . . . . . . . . . . . . . . . . . . .19

Change Time Style . . . . . . . . . . . . . . . . . . . . . .19

Change Current Date . . . . . . . . . . . . . . . . . . .20

Configure Hold Time . . . . . . . . . . . . . . . . . . . .20

Set Flick Warn . . . . . . . . . . . . . . . . . . . . . . . . .20

Set Warn Time . . . . . . . . . . . . . . . . . . . . . . . . .21

Set Time Zone . . . . . . . . . . . . . . . . . . . . . . . . .21

Set Latitude and Longitude . . . . . . . . . . . . . .21

Set Daylight Saving Time . . . . . . . . . . . . . . . .22

Set Manual DST Dates . . . . . . . . . . . . . . . . . . .22

Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Activate a Preset . . . . . . . . . . . . . . . . . . . . . . .23

Record a Preset . . . . . . . . . . . . . . . . . . . . . . . .24

Deactivate . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Holiday Shut-Off . . . . . . . . . . . . . . . . . . . . . . . . . .25

Configuration of Holiday Spaces . . . . . . . . . .25

Change default Shut-Off Time duration . . . .26

Menu Flow Chart . . . . . . . . . . 27

1Features 1

Overview

Welcome to the Echo Astronomical TimeClock (E-ATC) Installation and

Configuration Manual. This guide contains the procedures for successful

programming of the E-ATC when used as part of a Unison Echo®control

system.

The E-ATC provides Unison Echo and Sensor®power control systems with

low-cost, easy-to-use, and easy-to-program time-based control.

The six-button user interface and large backlit display allow for simple setup

and operation for time based events, manual control hold, override, event

recurrence mode, and built-in FlickWarn.

Features

• Supports 16 Echo control spaces

• Astronomical timeclock with +/- sunset or sunrise settings and

programmable latitude/longitude

• 24-hour real time clock with user configurable Daylight Saving Time

(DST)

• 50 field-programmable events

• Manual Hold, keeps the system in the current event up to two hours

or until canceled

• Simple manual control of presets with overrides

• Resumes program automatically after a power loss event

• Backlit graphical LCD display

• Meets California Title 24 and ASHRAE-90.1 requirements

2 Echo TimeClock Configuration Manual

Warnings and Notice Conventions

These symbols are used throughout ETC documentation to alert you to

danger or important information.

Note:

Notes are helpful hints and information that are supplemental to

the main text.

CAUTION:

A Caution statement indicates situations where there may be

undefined or unwanted consequences of an action, potential for

data loss or an equipment problem.

WARNING:

A Warning statement indicates situations where damage

may occur, people may be harmed, or there are serious or

dangerous consequences of an action.

WARNING:

RISK OF ELECTRIC SHOCK! This warning statement indicates

situations where there is a risk of electric shock.

1Contacting ETC 3

Contacting ETC

If you are having difficulties, your most convenient resources are the

references given in this manual. To search more widely, try the ETC website

at www.etcconnect.com. If none of these resources is sufficient, contact

ETC technical services directly at one of the offices identified below.

Emergency service is available from all ETC offices outside of normal

business hours. When calling for assistance, please have the following

information readily available:

• Product model and serial number (typically located on the product

label)

• Complete list of ETC equipment in the system

• Complete list of other installed products and components connected

to the system you are troubleshooting

Please e-mail comments about this manual to:

[email protected]

Americas United Kingdom

Electronic Theatre Controls Inc. Electronic Theatre Controls Ltd.

Technical Services Department Technical Services Department

3031 Pleasant View Road 26-28 Victoria Industrial Estate

Middleton, WI 53562 Victoria Road,

800-775-4382 (USA, toll-free) London W3 6UU England

+1-608 831-4116 +44 (0)20 8896 1000

[email protected] [email protected]

Asia Germany

Electronic Theatre Controls Asia, Ltd. Electronic Theatre Controls GmbH

Technical Services Department Technical Services Department

Room 1801, 18/F Ohmstrasse 3

Tower 1, Phase 1 Enterprise Square 83607 Holzkirchen, Germany

9 Sheung Yuet Road +49 (80 24) 47 00-0

Kowloon Bay, Kowloon, Hong Kong [email protected]

+852 2799 1220

[email protected]

4 Echo TimeClock Configuration Manual

Specification

Ambient Environment

For indoor, commercial controls use only. Operating temperature 0-40°C,

5-95° non-condensing humidity.

Compliance

• UL and cUL LISTED

• CE marked

• Meets California Title 24

• Meets ASHRAE-90.1

Electrical Requirements

The E-ATC ships with a termination kit for the required terminations. This kit

contains a 24 Vdc auxiliary power pigtail, EchoConnect™ bus pigtail, ESD

ground wire pigtail, spacers, and all required wire termination connectors

for installation.

The E-ATC requires external power provided to the unit by an auxiliary 24

Vdc (Class II) power supply and EchoConnect which supports data and

control to the EchoConnect station communication bus.

Note:

Installation should follow all local codes and standard electrical

practices.

Note:

NEC Class 2 products are to be wired in accordance with NEC

Article 725 and local jurisdiction requirements. All power and

control wiring should be installed and terminated by a qualified

installer and should follow standard wiring installation practices.

EchoConnect

bus pigtail

WAGO

connectors

ESD ground

wire pigtail

spacers

24VDC

power

pigtail

1Specification 5

24 Vdc

Requires two 16 AWG (1.5mm2) wires (typically a black and red wire pair),

which terminate to a provided 24 Vdc auxiliary power pigtail. WAGO®cage

clamp connectors are provided.

The 24 Vdc auxiliary power pigtail is connectorized for installation to the

two position receptacle on the rear side of the E-ATC.

EchoConnect

The E-ATC requires EchoConnect, Belden 8471 (or equivalent) plus one ESD

ground wire, supporting data and control to the EchoConnect station

communication bus.

An EchoConnect bus pigtail and ESD ground wire pigtail are provided as

well as the required WAGO cage clamp connectors to make the

terminations from the building wire to the pigtails.

The EchoConnect bus pigtail is connectorized for installation to the two

position receptacle on the rear side of the E-ATC. The ESD ground wire

pigtail has a spade terminal for installation to the receptacle on the E-ATC,

near the EchoConnect bus connection.

Note:

Category 5 (Cat5) wiring is supported for the EchoConnect

station communication bus with some limitations. Reference the

ETC Cat5 Cable Preparation Setup Guide for more details. ETC

documentation is available for download at

www.etcconnect.com.

6 Echo TimeClock Configuration Manual

Mounting Requirements

The E-ATC is capable of flush or surface mounting for installation in any

location with conditions meeting the ambient environment requirements

listed on the previous page.

Alternatively, the E-ATC can be integrated into a Echo Room Controller.

Flush

Flush mount the E-ATC to an industry standard 2 gang back box, not

provided. The back box should be installed plum and square for best results.

Ensure that the back box is clean and free of obstructions and that all wiring

is installed correctly.

Surface

A surface mounted back box is available, sold separately, from ETC.

Echo Room Controller

ETC offers the Echo Room Controller with integrated Echo Astronomical

TimeClock. Reference the Echo Room Controller Installation and

Configuration Manual information regarding wire terminations in this

installation scenario.

Refer back to this manual for configuration information.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali ETC Orologio marcatempo

ETC

ETC ECHOFLEX Wireless TimeClock Manuale utente

Manuali Orologio marcatempo popolari di altre marche

Dyflexis

Dyflexis Rex-O-Matic Noa Manuale utente

L’EPEE 1839

L’EPEE 1839 TIME FAST II Manuale utente

TimeMoto

TimeMoto TM-616 Manuale utente

Videx

Videx 701T Manuale utente

Kronos

Kronos Timekeeper 400 Series Istruzioni operative

Scarlett

Scarlett SC-810 Manuale utente

Funtronix

Funtronix SCORE-N-TIME T-240 Manuale utente

IKEA

IKEA NUFFRA 10357872 Manuale utente

Multipipe

Multipipe 22-23015 Guida utente

L’EPEE 1839

L’EPEE 1839 SUN CLOCK Manuale utente

Oregon Scientific

Oregon Scientific TW331 Manuale utente

MT Logic

MT Logic CL-471 Manuale utente

Easy Clocking

Easy Clocking XENIO 500 Manuale

Amano

Amano MTX-15 Manuale utente

LA CROSSE CLOCK

LA CROSSE CLOCK Harper 404-3450A Manuale utente

Europa components

Europa components ET167DYD Manuale utente

TONIN CASA

TONIN CASA Opaca circle Manuale utente

CS TIMECLOCK

CS TIMECLOCK 2110 Manuale di istruzioni