ETIC XSLAN+140 Manuale utente
XSLAN+140
Ethernet Extender
SHDSL Switch
________________
Installation manual
Document reference : 9020409-01
_________________
INSTALLATION MANUAL
Page 2 XSLAN+140
INSTALLATION MANUAL
Content
1PRODUCTS IDENTIFICATION............................................................ 4
2DELIVERY CONTENT AND ACCESSORIES..................................... 4
3PRODUCT OVERVIEW........................................................................ 5
4DIMENSIONS ....................................................................................... 6
5CONNECTORS .................................................................................... 6
6LED INDICATORS ............................................................................... 8
7DIP SWITCHES.................................................................................... 9
8DIN RAIL MOUNTING........................................................................ 10
9COOLING ........................................................................................... 11
10 SUPPLY VOLTAGE........................................................................... 11
11 ISOLATION AND ENCLOSURE GROUNDING................................ 11
12 Configuration..................................................................... 11
12.1 Principle ............................................................................. 11
12.2 Configuration steps .......................................................... 14
12.3 Step 1 : Setting-up the « STU-R » XSLAN+140 .............. 14
12.4 Step 2 : Setting-up the « STU-C » XSLAN+140 .............. 14
12.5 Step 3 : Testing the connection ...................................... 14
13 CONNECTING THE XSLAN+ TO THE LINE .................................... 15
13.1 Type of cable ..................................................................... 15
13.2 Cross talk........................................................................... 15
13.3 Protecting the shdsl switch from lightning.................... 16
13.4 Connecting the shdsl switch to the line......................... 17
14 ASSIGNING AN IP ADDRESS TO THE XSLAN+ ............................ 17
15 DIAGNOSTIC ..................................................................................... 18
16 RESTORING THE FACTORY DEFAULT CONFIGURATION.......... 19
XSLAN+140 Page 3
INSTALLATION MANUAL
1 Products identification
XSLAN+140
Min supply V. VDC 10
Max supply V. VDC 60
Power consumption (W) 4
SHDSL ports 1
Max data rate (Mb/s) 5.6
Ethernet ports 10-100 Mb/s 4
RS232 0
RS485 2 wires 0
VLAN, Y
SNMP, QoS DiffServ Y
Html Configuration Y
Serial gateway
RAW TCP&UDP
telnet, modbus, unitelway
0
2 Delivery content and accessories
The product itself is delivered with a CD including the user manual and the eticfinder
software tool with which you can discover the IP address of any product manufactured by
ETIC TELECOM and connected to an Ethernet network. 1
Page 4 XSLAN+140
INSTALLATION MANUAL
3 Product overview
The XSLAN+140 provides one
shdsl interface to extend an
Ethernet network over a twisted
pair.
XSLAN+140 Page 5
INSTALLATION MANUAL
4 Dimensions
5 Connectors
Page 6 XSLAN+140
INSTALLATION MANUAL
2 positions screw terminal : Supply voltage 2
Protected against reverse polarity
Position Signal Function
1 Power + 10-60 VDC :
2 Power - 0V isolated from the enclosure
4 positions screw terminal :Digital input and output
Position Signal Function
1 3V3 3 V DC provided by the XS+
2 In Digital input
3 F + Digital output + (max 50Vdc - 0,6A)
4 F - Digital output -
2 positions screw terminal : Shdsl
Position Signal Function
1 Line SHDSL line conductor (the two wires can be inverted)
2 Line SHDSL line conductor (the two wires can be inverted)
RJ45 connector : Ethernet
Position Signal Function
1 Tx + Emission polarity +
2 Tx - Emission polarity -
3 Rx + Reception polarity +
4 N.C -
5 N.C -
6 Rx - Reception polarity -
7 N.C. -
8 N.C. -
XSLAN+140 Page 7
INSTALLATION MANUAL
6 Led indicators
Led Status Description
1 ON green The supply voltage is present
2 Not used
ON green The unit is ready
ON red At power on : The product is starting
Otherwise : Product failure
Not used
Flashing
slowly SHDSL connection
ON SHDSL connection established
Shdsl
Flashing
quickly
SHDSL connection established ; traffic
across the line
Page 8 XSLAN+140
INSTALLATION MANUAL
7 DIP switches
SW1 Management
OFF Operation without IP address
ON
The IP address assigned to the product to reach the
html server is the stored IP address
The default IP address is 192.168.0.128
SW2 SW3 SW4 SW5 Shdsl connection profile
OFF OFF OFF OFF Mode STU_R
ON OFF OFF OFF STU_C - Auto - Standard
OFF ON OFF OFF STU_C - Auto - Endurance
ON ON OFF OFF STU_C - Auto - Performance
OFF OFF ON OFF STU_C - Auto - TurboSHort
ON OFF ON OFF STU_C - Fixed - 256 kbit/s
OFF ON ON OFF STU_C - Fixed - 512 kbit/s
ON ON ON OFF STU_C - Fixed - 1024 kbit/s
OFF OFF OFF ON STU_C - Fixed - 1536 kbit/s
ON OFF OFF ON STU_C - Fixed - 3392 kbit/s
OFF ON OFF ON STU_C - Fixed - 4480 kbit/s
ON ON OFF ON STU_C - Fixed - 5696 kbit/s
OFF OFF ON ON STU_C - Fixed - 7168 kbit/s
ON OFF ON ON STU_C - Fixed - 9024 kbit/s
OFF ON ON ON STU_C - Fixed - 11292 kbit/s
ON ON ON ON STU_C - Fixed - 15288 kbit/s
SW 6 Must be left OFF
XSLAN+140 Page 9
INSTALLATION MANUAL
8 DIN rail mounting
Mounting the unit on the DIN rail
This unit should be mounted on 35
mm DIN-rail, horizontally mounted.
Removing the unit from the DIN rail
Page 10 XSLAN+140
Indice
