3
1. CONTENTS
1. Contents ....................................................3
2. General instructions ..................................3
3. Safety-related regulations .........................4
4. Safety instructions .....................................4
5. Mounting....................................................5
6. Anti-Drop Safeguard..................................6
7. Initial operation ..........................................6
8. Technical data .........................................12
9. Dimensions..............................................12
10. Drawings..................................................13
11. Maintenance ............................................14
12. Transport, Storage, Disposal...................14
13. Service, Spare parts, Accessories ..........14
14. Declaration of conformity.........................15
15. Annex ......................................................16
2. GENERAL INSTRUCTIONS
2.1 Original operating instructions
This manual is the original manual.
Copyright protection: any reproduction is permitted
only with approval of the manufacturer.
Subject to alterations in the interest of technical pro-
gress.
All dimensions given in mm. The diagrams in this
manual are not to scale.
2.2 Intended use
The operator series RDA are designed exclusively for
opening and closing doors (such as rolling doors or
rolling grilles) which have to be secured against falling.
For other applications of the operators, the manufactu-
rer must be consulted.
2.3 Warranty
The function and safety of the equipment is only gua-
ranteed if the warning and safety instructions included
in these operating instructions are adhered to.
The manufacturer is not liable for injury to persons or
damage to property if these occur as a result of the
warnings and safety advice being disregarded.
The CE declaration and the warranty will void if com-
ponents are changed.
Only original spare parts and by the manufacturer ap-
proved accessories shall be used. These parts are
used to maintain the quality and safety of the machi-
ne. Changes are only permitted after consultation with
the manufacturer.
2.4 Target group
Only qualified and trained specialists are permitted to
mount the operator and perform mechanical mainte-
nance.
Only qualified and trained electricians may connect
the operator and carry out the electrical maintenance.
Qualified and trained people have knowledge of gene-
ral and specific safety and accident prevention regula-
tions, the relevant regulations and standards, training
in the use and maintenance of adequate safety
equipment, as well as the ability to recognize hazards
associated with their work.
2.5 Key to symbols
DANGER !
Indicates a hazard with a high level of risk which, if not
avoided, will result in death or serious injury.
WARNING !
Indicates a hazard with a medium level of risk which, if
not avoided, could result in death or serious injury.
CAUTION !
Indicates a hazard with a low level of risk which, if not
avoided, could result in minor or moderate injury.
NOTICE !
Indicates an imminent danger of damage or destruction.
INFORMATION !
Reference to separate documents which must be com-
plied with.
