EUCHIPS EUC003V/D Manuale utente

SHANGHAI EUCHIPS INDUSTRIAL CO.,LTD

EUC003V/D User Manual V01.1 1 www.euchips.com

EUC003V/D

EUC003V R/D

Dimming Function/

Detachable Sensor

Introduction

The two type sensors are innovative and active motion detectors with HF system 5.8GHz. Motion can be detected

through plastic, glass and thin non-metal materials.EUC003V R/D basically has the same specification with

EUC003V/D, except the higher mounting height 12m Max.

The sensors allow energy saving without compromising comfort. When used in combination with 1-10V dimmable

LED drivers or ballasts, they can achieve 3-step dimming function, which is perfect for use in some areas that

requires a light change notice before totally switch off.

Also, the 1-10V interface in the sensors can match up with stand-alone daylight sensor EUS01, and implement

daylight harvesting, means the lighting system has automated controls that either turn off or dim artificial light in

response to the available daylight in the space.

Product Features

zUnique split design makes it is suitable to fix within lamps which have limited space.

zAutomatic dimming when used in combination with 1-10V dimmable LED drivers or ballasts.

zBuilt-in adjustable daylight sensor.

z1-10V interface can match up with stand-alone daylight sensor EUS01 and achieve daylight harvesting.

zCompact size makes it suitable to fix within most luminaries.

zDetection area, time delay and daylight threshold can be precisely set via DIP switch.

zWide detection area, range up to 16m in diameter.

SHANGHAI EUCHIPS INDUSTRIAL CO.,LTD

EUC003V/D User Manual V01.1 2 www.euchips.com

2-step dimming function

The sensors can provide 2-step dimming function, 100 %→low light (Never turn off). They are particularly

suitable for use in corridors, stairwells and underground passages where low light levels are maintained until

motion is detected.

No motion detected, the lamp

remains at a low light level all the

time.

When motion is detected, the

sensor brightens the lamp to 100%

illumination.

After the hold time, the sensor dims

the lamp at the preset low light level

if no motion is detected.

3-step dimming function

When used in combination with 1-10V dimmable LED drivers and ballasts, the sensors can achieve 3-step

dimming function, 100%→low light→off. And the sensors build in adjustable daylight sensors, very easy to

install and cost-effective.

With sufficient ambient

light, the sensor does

not switch on the lamp.

With insufficient

ambient light, the

sensor switches on the

lamp when motion is

detected.

After hold time, the

sensor dims the lamp at

a low light level if no

new motion trigger.

After stand-by period,

the sensor switches off

the lamp if no motion is

detected in its detection

zone.

Wiring Diagram

SHANGHAI EUCHIPS INDUSTRIAL CO.,LTD

EUC003V/D User Manual V01.1 3 www.euchips.com

Daylight Harvesting

When used in combination with daylight sensor EUS01, the system has automated controls that either turn off or dim

artificial light in response to the available daylight in the space.

Ambient light larger than

preset illumination level

(Set by 1-10V daylight

sensor), the lamp keeps

off.

Ambient light below than

preset illumination level,

the lamp switches on

when motion is detected.

The lamp lights on 100% illumination or dims to maintain the

preset illumination level against ambient light.

If with sufficient ambient light, the

lamp turns off at once, even with

motion trigger.

If with insufficient ambient light, the lamp dims to a stand-by dimming level

(Set in the motion sensor) when no motion detected during hold time, and

then switches off after stand-by period.

Wiring Diagram

SHANGHAI EUCHIPS INDUSTRIAL CO.,LTD

EUC003V/D User Manual V01.1 4 www.euchips.com

Detection Pattern

EUC003V/D

Wall mounting pattern（Unit：m）Ceiling mounting pattern（Unit：m）

Suggested mounting height：1-1.8m Suggested mounting height：2.5-8m

EUC003V R/D

Wall mounting pattern（Unit：m）Ceiling mounting pattern（Unit：m）

Suggested mounting height：1-1.8m Suggested mounting height：2.5-12m

Technical Parameters

Operating voltage 220~240Vac, 50/60Hz

Rated load 800W(inductive), 1200W(resistive)

HF system 5.8GHz±75MHz, ISM wave band

Transmitting power <0.5mW

Power consumption ≤0.5W(standby), <1W(operation)

Detection zone

(D x H) Max.:16mx8m (EUC003V/D)

Max: 16m x 12m (EUC003V R/D)

Detection sensitivity 10%/25%/50%/75%/100%

Hold time 10s/30s/90s/3min/20min/30min

Daylight sensor 5lux/10lux/30lux/50lux/Disable

Stand-by period 5s/5min/10min/30min/1h/Disable

Stand-by dimming level 10%/20%/30%/40%/50%

Mounting height 8m Max. (EUC003V/D),

12m Max. (EUC003V R/D)

Motion detection 0.5~3m/s

Detection angle 150°(wall installation)

360° (ceiling installation)

Operating temperature -35℃~70℃

IP rating IP20

SHANGHAI EUCHIPS INDUSTRIAL CO.,LTD

EUC003V/D User Manual V01.1 5 www.euchips.com

Setting

By selecting the combination on the DIP switch, sensor data can be precisely set for each specific application.

Detection area

Detection area can be reduced by selecting the combination on the DIP

switches to fit precisely each application

Hold time

Refers to the time period the lamp remains at 100% illumination after no

motion detected.

Stand-by period

Refers to the time period the lamp remains at a low light level before it

completely switches off in the long absence of people.

When set to Disable mode, the low light is maintained until motion is

detected.

Stand-by dimming level

The low light level you would like to have after the hold time in the long

absence of people.

Daylight sensor

The sensor can be set to only allow the lamp to illuminate below a defined

ambient brightness threshold.

When set to Disable mode, the daylight sensor will switch on the lamp when

motion is detected regardless of ambient light level.

50lux, 30lux: twilight operation, 10lux, 5lux: darkness operation only.

Note that daylight sensor is active only when lamp totally switches off.

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente