EURA CEA-41C5 Manuale utente
CEA-41C5
High-Denition
PTZ Network Camera
User Manual
2
Table of contents
1. Device characteristic ............................................................................................................. 4
2. Device construction...............................................................................................................5
2.1. Installation method.........................................................................................................5
3. Device conguration ............................................................................................................ 6
3.1. Connection device .......................................................................................................... 6
3.2. Typical wiring diagram...................................................................................................7
3.3. Using Admin Tool congure the camera’s IP Address............................................. 8
4. Access to the device.............................................................................................................. 9
4.1. Access using WEB Browsers......................................................................................... 9
4.1.1. Logon....................................................................................................................... 9
4.1.2. Video plugin ........................................................................................................ 10
4.1.3. WEB Browser Interface ..................................................................................... 10
4.1.4. Connection, Snapshot and Recording............................................................. 11
4.1.5. Video Specication Adjustment.......................................................................12
4.1.6. PTZ Control...........................................................................................................12
4.1.7. Image Modes ........................................................................................................15
4.1.8. Video Replay ........................................................................................................16
4.1.9. Video Stream Parameter....................................................................................17
4.1.10. OSD.......................................................................................................................18
4.1.11. Motion Detection ...............................................................................................19
4.1.12. Advanced Functions.........................................................................................20
4.1.13. Device information........................................................................................... 23
4.1.14. Privacy mask...................................................................................................... 23
4.2. Access using RTPS Player........................................................................................... 24
4.3. Access using NVR......................................................................................................... 24
4.4. Access using Video Management Soware ........................................................... 25
5. Parameter Setting............................................................................................................... 25
5.1. Channel Parameter....................................................................................................... 26
5.1.1. Audio Parameter Setting itd. ............................................................................26
5.1.2. RS485 Parameters.............................................................................................. 26
5.1.3. Automatic cruise protection..............................................................................27
5.2. Network Parameters....................................................................................................27
5.2.1. Network Settings ................................................................................................27
5.2.2. RTPS Parameters ............................................................................................... 29
3
5.2.3. NTP Parameters ................................................................................................. 29
5.2.4. Heartbeat Setting..............................................................................................29
5.3. Recording Parameters ................................................................................................30
5.3.1. FTP Parameters...................................................................................................30
5.3.2. Snapshot Parameters ........................................................................................31
5.4. Alarm Settings...............................................................................................................31
5.4.1. Alarm Input...........................................................................................................31
5.4.2. Alarm Output...................................................................................................... 32
5.5. System Parameters ......................................................................................................33
5.5.1. User Management ...............................................................................................33
5.5.2. Advanced System Maintenance.......................................................................35
5.5.2.1. System Time ......................................................................................................35
5.5.2.2. Upgrading Soware Via WEB .......................................................................35
5.5.2.3. Saving Setting ................................................................................................. 36
5.5.2.4. Restoring Factory Defaults ...........................................................................37
5.5.2.5. Restart ...............................................................................................................37
5.5.2.6. Device Expanded Parameter.........................................................................37
5.6. Log view..........................................................................................................................37
5.7. Additional parameters..................................................................................................37
6. Technical parameters ......................................................................................................... 38
4
1. Device characteristic
Thanks for using our HD network Camera which is based on the standard H.264 Main Prole. It uses the
progressive scanning image transducer of mega pixels and its denition can meet the broadcast image quality. It
supports real-time dual-stream coding and its recording les can be decoded by standard decoders and played
by common player soware. The device doubles the quality of MPEG-4 with the same bit rate. To achieve the
same image quality, the bit rate is only half of that of MPEG-4. The product is easy to be operated and installed,
and can signicantly reduce the cost of wiring and construction and extend your CCTV network innitely.
Product Features:
•HDTV HD Vision
− HDTV performance, that supports full HD 1080P + Full D1 or SXGA + Full D1 dual-stream resolution, 16:9
aspect ratio and supports H.264 main prole in full frame rate.
•Zoom & AF
− Optical zoom and auto focus function, that not only can deliver best view distance but also can realizes
perfect auto focus.
•Low Code Stream + High Denition
− Perfect low code stream function, the video denition can reach to 720TVL when compress 720P video under
2~4Mbps,
− When compress 1.3MP video under 3~5Mbps, the video denition can reach to 800TVL,
− The video denition can reach to 1000TVL when compress 1080P video under 4~6Mbps.
•Stronger Intelligent Function
− Support WEB access to visit and congure the devices, support OSD, support real time video transmission,
support motion detection,
− Built in network code function, support ONVIF protocol,
− Support JPEG capture picture,unied client remote control monitoring soware and easy connect the brand
NVR,
− Ethernet 10/100 RJ45 auto adaptive, support RTSP/FTP/PPPOE/DHCP/DDNS/NTPS and so on network
protocol.
•PTZ Control
− Pan 360°, continuous rotation; Tilt 90°, no monitoring blind spot,
− Auto adjust PTZ speed according to the zoom function.
•Night vision
− Auto open infrared lamps according to the light,
− Auto adjust the brightness of infrared lamps based on the lens far or near.
− Adopt the forth infrared array light technology coordinate with intelligent dimming technology, better night
vision.
− Suitable for HD network monitoring occasions needing zoom control:
− Safe city large and medium concentration application, expressway, road and bridge, tunnel trac real-time
monitoring
−HD video conference
− Real-time night HD monitoring for nancial organizations, like banks
− 24-hour security monitoring HD network for factories and stadium
− Real-time remote monitoring for airport, school, plaza, etc.
− HD environment monitoring for forest and scenic region, etc.
−HD digital court monitoring application.
5
2. Device construction
Fig. 1. Dome Camera
2.1. Installation method
’L’ type speed dome camera installation method
Step 1- Draw positioning holes
Take out bracket from package box, mark the hole’s position on wall or ceiling based on mount bracket bottom
4pcs installation holes.
Step 2- Drill holes and put expansion screws in
Drill 4pcs expansion screw’s installation holes at pre-marked position, then put 4pcs expansion screws in.
Note: Please bring expansion screws own.
Fig. 2. Step 3
Step 3 - Lead cable through wall mount bracket
Lead the cable through wall mount bracket hole.
Fig. 3. Step 4
6
Step 4 - Connect speed dome camera and wall bracket.
Put speed dome camera connection port into the bracket hole and screw 4pcs hexagon screws into the corre-
sponding screw holes.
Fig. 4. Step 5
Step 5 - Fix the speed dome camera
Lead the cable out from the wiring port, then x it on the wall by using 4 screws. Seal the wiring port of the brac-
ket by using silicon sealant.
Step 6 - Cable connection
Please refer to section of six of this chapter- Connection method.
Step 7- Tear o protection lm
Tear o protection lm of transparent cover
Note: Please take care of the transparent cover.
3. Device conguration
3.1. Connection device
Connection method as below program, order to connect network cable, power supply cable(connect order based
on the keyboard model number, here just give one example). Details as below:
Fig. 5.
7
3.2. Typical wiring diagram
LAN Connection
Fig. 6.
WAN Connection
Fig. 7.
8
3.3. Using Admin Tool congure the camera’s IP Address
The system provides the management test tool – Admin Tool. Please check the system CD. The tool can:
1) Search network cameras or video servers in the network.
2) View serial number, name, IP, version, product model, port, and MAC address, etc.
3) Assign and setup IP and specify a management center in batch.
4) The status indicator can conrm the current network camera for restart and upgrade, etc.
Fig. 8.
Congure the IP address of the specied camera
Running the Admin Tool management tools automatically retrieve network camera device available in the
current network. Lists the MAC Address, IP Address, device name and other information; select a device and
double-click, the device information dialog box pops up, you can congure the device name, IP address, default
gate and other information.
Fig. 9.
9
Batch congure the IP address of the network camera
The Admin Tool management tools can use the same IP address each camera factory before being installed
in bulk conguration of multiple network cameras IP address.
These network cameras are connected to the same switch with the machine, through the Admin Tool quick
search network of devices, the mouse marquee multiple camera equipment, click the “batch Conguration”
button, the batch IP address conguration window pop-up. The user can set the starting IP address and ending
IP address and other content, bulk assign IP addresses to these network cameras, specify the subnet mask,
default gateway, port and center IP information. Meanwhile, we can use the tool to open the status indicator to
conrm which network camera is being tested, easy for putting on a label aer testing.
Fig. 10.
4. Access to the device
4.1. Access using WEB Browsers
4.1.1. Logon
Fill in the IP address of the network camera into the URL of your WEB browser. The default IP is 192.168.1.4.
The logon dialog box is shown as below.
Fig. 11.
Username: The default username of the network camera is system.
Password: The default password of the network camera is system.
Port: The data port of the network camera is default to be 6002.
10
Note:
1) If the data port of the network camera is changed, please ll in the changed port when logging on. Or it is
not allowed to log on.
2) Please click the push-down list at the upper right corner of the logon interface to change the language.
4.1.2. Video plugin
First-time logon and installation:
Aer logging on successfully, the user is prompted to download the play plug-in if it is the rst time for the
device to access. Please download and run the play plug-in installation manually. The name of the play plug-in
is HDLive.exe.
Fig. 12.
Double-click the downloaded HDLive.exe. The le shall automatically start its installation of play plug-in for
HD Network Camera User’s Manual WEB browser. Conrm your installation by clicking “Next Step” till the completion
of the installation. Aer the completion of the installation, return to the WEB browser page and refresh the page
to browse the video.
Updating plug-in
When detecting new version of the play plug-in, the system shall prompt updating new version of play
plug-in.
Fig. 13.
Note:
It is required to install this play plug-in if using WEB to browse the video. Currently the plug-in supports
Windows XP/2003/7/8/8.1/10 32 and 64 bits OS.
Due to the reason that the security setting of IE browsers is dierent, it may be required to allow the
uploading of the play plug-in. Please click “Allow” button when the following prompt is shown.
Fig. 14.
Some browsers may be required to congure “Internet options – Security – Custom level”. In the security
settings, please set the ActiveX component and plug-in to be “Enable” or “Prompt”.
Display Resolution
WEB browse client interface optimum display resolution is 1024x768, below this resolution it may cause
incomplete or dislocation and pop up warning prompt window.
4.1.3. WEB Browser Interface
Please refresh the video browse page aer installing the play plug-in. It is divided into three sections shown
as below.
Top: Login user information, detailed settings and exit.
Lower le: Video display
Lower right: Common parameter adjustment and control. Click labels to switch and congure.
Indice
