Euroboor B60 Manuale utente
Serial number:
Date of purchase:
/ /
Don’t forget to register your machine at:
www.euroboor.com/register
[ only when registered you benefit from extended warranty ]
Bevelling machine
B60 / B60S
Operators manual
V 1.0 EN
2
3
Congratulations on the purchase of your Euroboor B60(S) portable bevelling machine. our model is
designed to produce superior bevel finishes. Through years of experience, constant innovation and
development, Euroboor is committed to provide you with metal cutting tools and products to help
you be more productive.
Before operating your bevelling machine, please read all instructions first. These include the
Operators Manual and warning label on the unit itself. With proper use, car and maintenance your
model will provide you with years of effective bevelling performance.
TO REDUCE THE RISK OF INJURY USER MUST READ AND UNDERSTAND ALL INSTRUCTIONS
EUROBOOR BV
Kryptonstraat 110
2718TD Zoetermeer
Netherlands
T +31 79 361 49 90
F +31 79 361 49 89
www.euroboor.com
4
5
Table of contents
. Safety 6
1.1 General safety instructions 6
1.2 Specific safety information 8
2. Description 0
2.1 Intended use 10
2.2 Description and features 10
2.3 Box contents 13
2.4 Serial number 13
2.5 Technical data 14
2.6 Symbols 15
2.7 Environmental 16
3. Preparation & adjustment 7
3.1 Assembly 17
3.2 Prior to use 17
3.3 Cutting blade installation & indexing 18
3.3.1 Disassembly milling head cover 18
3.3.2 Removing and reinstalling cutting blade 19
3.4 Replacing milling head 21
3.4.1 Disassembly milling head cover 21
3.4.2 Removing and reinstalling milling head 21
3.5 Setting bevel angle 22
3.6 Setting bevel depth/width 23
3.7 Conversion for use on pipe 25
4. Using the machine 27
4.1 Switching machine into standby mode 27
4.2 Switching motor on and off 27
4.3 Speed adjustment 28
4.4 Overload protection 28
5. Working with operating tools 29
5.1 Bevelling plate material 29
5.2 Facing plate material 31
5.3 Bevelling pipe material 33
6. Maintenance 36
7. Trouble shooting 38
8. Exploded view & spare part list 39
8.1 Exploded views 39
8.2 Spare part lists 43
8.3 Wiring diagrams 45
9. Notes 47
6
. Safety
. General safety instructions
WARNING
READ AND UNDERSTAND ALL SAFETY INFORMATION AND INSTRUCTIONS.
FAILURE TO FOLLOW THE WARNINGS AND INSTRUCTIONS MA RESULT IN ELECTRIC SHOCK, FIRE
AND/OR SERIOUS INJUR .
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
THE TERM “POWER TOOL” IN THE WARNINGS REFERS TO OUR MAINS-OPERATED CORDED POWER
TOOL.
Please also observe the relevant national industrial safety regulations. Non-observance of the safety
instructions in the said documentation can lead to an electric shock, burns and/or severe injuries.
This Operator’s Manual including the “General Safety Instructions” should be kept for later use and
enclosed with the power tool, should it be passed on or sold.
WORK AREA SAFETY
1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
3. Keep bystanders, children, and visitors away while operating a power tool. Distractions can
cause you to lose control.
ELECTRICAL SAFETY
1. Power tool plugs must match the outlet. Never modify the plug in any way. Do not us any
adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets
will reduced risk of electric shock.
2. Avoid body contact with grounded surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
4. Do not abuse the cord. Never use the cord to carry the power tool or pull the plug from an
outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged
cords immediately. Damaged cords increase the risk of electric shock.
5. When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
6. If operating a power tool in a damp location is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces the risk of electric shock.
7
PERSONAL SAFETY
1. Stay alert, watch what you are doing and use common sense when using a power tool. Do
not use machine while tired or under the influence of drugs, alcohol, or medication. A
moment of inattention while operating power tools may result in serious personal injury.
2. Use personal protective equipment. Always wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
3. Prevent unintentional starting. Ensure switch is in the off-position before connecting to
power source and/or battery pack, picking up or carrying tool. Carrying power tools with
your finger on the switch or energizing power tools that have the switch on invites accidents.
4. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key
that is left attached to a rotating part of the power tool may result in personal injury.
5. Do not overreach. Keep proper footing and balance at all times. This enables better control
of the power tool in unexpected situations.
6. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and
gloves away from moving parts. Loose clothes, jewellery, or long hair can be caught in
moving parts.
7. If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used.
8. Never place hands, fingers, gloves or clothing near cutting area or rotating machine parts.
POWER TOOL USE AND CARE
1. Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
2. Do not use the power tool if the switch does not turn it on or off. Any tool that cannot be
controlled with the switch is dangerous and must be repaired.
3. Disconnect the plug from the power source and/or the battery pack from the power tool
before making any adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool accidentally.
4. Store power tools out of the reach of children and do not allow person unfamiliar with the
power tool or these instructions to operate the power tool. Power tools are dangerous in
the hands of untrained users.
5. Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts, and any other condition that may affect the power tool’s operation. If damaged,
have the tool serviced before use. Many accidents are caused by poorly maintained tools.
6. Keep cutting tools sharp and clean. Properly maintained tools, with sharp cutting edges are
less likely to bind and are easier to control.
7. Use the power tool, accessories and tool bits, etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the
power tool for operations different from those intended could result in a hazardous
situation.
8. Use only accessories that are recommended by Euroboor for your power tool. Accessories
that may be suitable for one machine, may become hazardous when used on another power
tool.
SERVICE
.
Have your power tool service by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
8
.2 Specific safety information
. ELECTRICAL SAFETY
DANGER
ELECTRICAL VOLTAGE! RISK OF FATAL INJUR DUE TO ELECTRIC SHOCK!
a) Grounded tools must be plugged into an outlet properly installed and grounded in
accordance with all codes and ordinances. Never remove the grounding prong or modify
the plug in any way. Do not use adaptor plugs. Check with a qualified electrician if you
are in doubt whether the outlet is properly grounded. If the tools should electrically
malfunction or break down, grounding provides a low resistance path to carry electricity
away from the user
b) When operation the tool outside, use an outdoor extension cord market “W-A” or “W”.
These cords are rated for outdoor use and reduce the risk of electric shock
c) Extension cables must have a sufficient cross-section so as to prevent an excessive drop
in voltage, or overheating. An excessive drop in voltage reduces the output an can lead to
failure of the motor
d) Never use multiple extensions cables together. Use a single longer one instead
e) Check the plug, cable and machine for damage each time using the machine
f) Remove the plug from the plug socket before undertaking an maintenance work on the
power tool
2. PERSONAL SAFETY
a) Check the plug, cable and machine for damage each time using the machine
b) Remove the plug from the plug socket before undertaking an maintenance work on the
power tool
WARNING
RISK OF INJUR FROM HIGH-TEMPERATURE CHIPS
c) Never touch the tool holder and keep all vulnerable body parts clear while the machine is
running, as high-temperature chips are expelled at high speed during operation
d) During operation, always guide the machine in a direction away from the body
e) Do not use the machine above your head
9
WARNING
RISK OF INJUR TO HANDS
f) Do not reach into the processing line with your hands
g) Use both hands to hold and operate the machine
WARNING
DUST CREATED B POWER GRINDING MA HARM OUR HEALTH
h) Some types of dust, such as dust from lead-based paint, is known to cause cancer, birth
defects or other reproductive harm. Risk varies on exposure and should always be
reduced by working in a well-ventilated area and by making use of approved safety
equipment, such as dust masks specifically designed to filter out microscopic particles
WARNING
NEVER MACHINE MATERIALS WHICH CONTAIN ASBESTOS
i) Only use recommended square carbide inserts (“cutting plates”), rated at the machine’s
maximum cutting rate or higher
j) Do not use dull or damaged cutting plates to prevent excessive friction and load, and
thus to prevent damage to and failure of the machine
k) Maintain labels and identification plates, as they carry important information. If
unreadable or missing, obtain replacement
3. TOOL USE AND CARE
WARNING
a) Hold power tool by insulated gripping surfaces, because the cutter may contact its own
cord. Cutting a “live” wire may make exposed metal parts of the power tool “live” and
shock the operator
WARNING
b) Use clamps or another practical way to secure and support the workpiece to a stable
platform. Holding the work by your hand or against the body leaves it unstable and may
lead to loss of control.
4. SERVICE
a) Only use original EUROBOOR parts, accessories and consumables
b) Have maintenance carried out by EUROBOOR specialists
RESIDUAL RISKS
In spite of the application of the relevant safety regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
•Impairment of hearing
•Risk of personal injury from flying particles
•Risk of burns due to accessories becoming hot during operation
•Risk of personal injury due to prolonged use.
Always try to reduce these risks as much as possible.
10
2. Description
2. Intended use
This shape bevelling, chamfering and deburring tool is an electrically driven portable machine for
machining workpieces in steel, chrome steel alloys, aluminium, aluminium alloys, brass and plastic.
The machine is designed exclusively for adding bevelled edges, rounding off edges, removing burrs,
removing sharp corners and chamfering faces on workpieces. The speed of the machine is variable
(B60S only) to suit the needs of various materials and is equipped with a graduated depth adjustable
deck. It comes standard with a milling head including 10 square indexable cutter inserts (“cutting
plates”) to achieve quick and easy bevelling.
WARNING
The machine should not be converted or modified, e.g. for any other form of use, other than as
specified in these operating instructions. Warranty will be voided and the user shall be liable for
damages and accidents due to incorrect use.
2.2 Description and features
1 Milling head cover
2 Guide plate assembly
3 Guide rollers
4 Serial number plate
5 Depth adjustment lock handle
6 Angle adjustment scale
7 Angle adjustment lock bolt
8 Depth adjustment scale
9 Positioning and operating handles
10 Depth adjustment knob
11 Milling head
12 Motor on/off switch
13 Motor check indicator light (green)
14 Overload indicator light (red)
15 Standby on/off switch
16 Motor start switch
17 Motor stop switch
18 Speed adjustment knob
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Euroboor Utensili elettrici
