Eurotech Titan Manuale di istruzioni
H
TITAN
Windows CE
Development Kit
Quickstart Manual
TITAN Windows CE Quickstart Manual
Definitions
Eurotech is the trading name for Eurotech Ltd.
Disclaimer
The information in this manual has been carefully checked and is believed to be accurate. Eurotech assumes no
responsibility for any infringements of patents or other rights of third parties, which may result from its use.
Eurotech assumes no responsibility for any inaccuracies that may be contained in this document. Eurotech makes no
commitment to update or keep current the information contained in this manual.
Eurotech reserves the right to make improvements to this document and/or product at any time and without notice.
Warranty
This product is supplied with a 3 year limited warranty. The product warranty covers failure of any Eurotech manufactured
product caused by manufacturing defects. The warranty on all third party manufactured products utilized by Eurotech is
limited to 1 year. Eurotech will make all reasonable effort to repair the product or replace it with an identical variant.
Eurotech reserves the right to replace the returned product with an alternative variant or an equivalent fit, form and
functional product. Delivery charges will apply to all returned products. Please check www.eurotech-ltd.co.uk/support for
information about Product Return Forms.
Trademarks
Windows CE .NET and Windows CE 5.0 are trademarks of the Microsoft Corporation.
ARM and StrongARM are registered trademarks of ARM Ltd.
Intel and XScale are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and
other countries.
CompactFlash is the registered trademark of SanDisk Corp.
All other trademarks and copyrights referred to are the property of their respective owners.
Revision History
Manual PCB Date Comments
Issue A 1st October 2007 First full release.
© 2007 Eurotech Ltd.
For contact details, see page 13.
ISO 9001
FM12961
TITAN Windows CE Quickstart Manual Contents
Contents
Introduction........................................................................................................................................4
Handling your board safely....................................................................................................5
About this manual..............................................................................................................................6
Related documents................................................................................................................6
Conventions...........................................................................................................................7
Getting started ...................................................................................................................................8
What’s in the kit?....................................................................................................................8
What else do I need?.............................................................................................................8
Unpacking and connecting up............................................................................................................9
Using the CRT-FPIF & VGA monitor....................................................................................10
Using the NEC 6.5 inch LCD display...................................................................................11
Appendix A - Contacting Eurotech...................................................................................................13
Appendix B - End User License Agreement (EULA)........................................................................14
Index................................................................................................................................................19
© 2007 Eurotech Ltd Issue A 3
TITAN Windows CE Quickstart Manual Introduction
Introduction
The TITAN is an ultra low power, high functionality, PC104 compatible Single Board
Computer (SBC) based on the Intel 520MHz PXA270 XScale RISC processor. The
PXA270 is an implementation of the Intel XScale micro-architecture combined with a
comprehensive set of integrated peripherals including:
• Intel®Wireless MMX™ designed for high-performance multimedia.
• Three ON-board Serial ports.
• Enhanced LCD controller.
• USB host.
• USB client.
• 4-bit SD I/O.
The TITAN board offers many additional features that make it ideal for power-sensitive
embedded communications, wireless, and automotive applications. These include:
• Up to 64MB Flash.
• 4/5 wire analog touchscreen interface.
• Ethernet controller.
• Watchdog timer.
• Two additional serial ports.
• AC’97 audio.
• I2C bus.
• PC/104 bus expansion.
• GPIO.
• SRAM (256K).
See the TITAN Technical Manual for details about the SBC features.
© 2007 Eurotech Ltd Issue A 4
TITAN Windows CE Quickstart Manual Introduction
Handling your board safely
Anti-static handling
The TITAN contains a number of sensitive CMOS devices. These could be damaged in
the event of static electricity being discharged through them. Please observe anti-static
precautions at all times when handling circuit boards. This includes storing boards in
appropriate anti-static packaging and wearing a wrist strap when handling them.
ElectroMagnetic Compatibility (EMC)
The TITAN is classified as a component with regard to the European Community EMC
regulations and it is the users responsibility to ensure that systems using the board are
compliant with the appropriate EMC standards.
Packaging Please ensure that should a board need to be returned to Eurotech Ltd, it is adequately
packed, preferably in the original packing material.
© 2007 Eurotech Ltd Issue A 5
TITAN Windows CE Quickstart Manual About this manual
About this manual
This manual helps you get your TITAN single board computer up and running as
quickly as possible. It provides information about the components contained in your
TITAN development kit and tells you how to configure the board and connect it to the
host system.
Related documents
This manual is supplied as part of the TITAN Windows CE development kit. Datasheets
for the major devices used on the TITAN board along with many other useful examples
are also included. For more detailed and up-to-date information please refer to the
documentation available on the CD that accompanies your development kit. This
includes:
• Development Kit CD Quickstart Guide (HTML), which provides detailed information,
organized in easy-to-access pages that you can navigate with your browser. It tells
you how the CD is organized, where to find things and how to get more information
for a particular topic.
• TITAN Technical Manual (PDF), which provides detailed reference information
about all aspects of the TITAN.
• TITAN Windows CE development kit Quickstart Manual (PDF).
© 2007 Eurotech Ltd Issue A 6
TITAN Windows CE Quickstart Manual About this manual
Conventions
Symbols The following symbols are used in this guide:
Symbol Explanation
Note - information that requires your attention.
Tip - a handy hint that may provide a useful alternative or save time.
Caution – proceeding with a course of action may damage your
equipment or result in loss of data.
Jumper is fitted.
Jumper is not fitted.
Jumper fitted on pins 1-2.
Jumper fitted on pins 2-3.
© 2007 Eurotech Ltd Issue A 7
TITAN Windows CE Quickstart Manual Getting started
Getting started
What’s in the kit?
The standard TITAN Windows CE development kit contains the following items:
• TITAN-M64-F32-R6 boards.
• +5V @2.5 A (110-240VAC input) power supply.
• TITAN Quickstart manual. (Other technical manuals are included on the CD.)
• Serial port breakout cable.
• RS-232 null modem adapter.
• RS-232 serial cable (ribbon, 2m).
• Flat panel display cable.
• ATouchscreen cable.
• FPIF-CRT (breakout assembly with standard CRT socket).
• Ethernet breakout assembly with standard RJ45 socket.
• USB breakout cable.
• Audio breakout cable.
• PC/104 mounting pillars (two sets).
The development kit may also include:
• Microsoft eMbedded Visual C++ 4.0 CD.
• Microsoft Platform Builder for Windows CE 5.0 (evaluation version).
What else do I need?
If your development kit includes an LCD then you do not need any other components
to power up.
If your development kit does not include an LCD then you need a VGA compatible
monitor with a DB15 connector.
A USB mouse and an Ethernet connection may also be useful although not essential.
© 2007 Eurotech Ltd Issue A 8
TITAN Windows CE Quickstart Manual Unpacking and connecting up
Unpacking and connecting up
This section guides you, step-by-step, through the process of connecting up the TITAN
for the first time and powering up the system.
The TITAN is delivered ready to run. There are no link settings or configuration
switches that need to be adjusted for the board to operate, however as instructed
below, you should enable the battery link so that the on-board RTC operates as
expected.
For normal development, connections to the development computer via Ethernet and
USB are recommended. The TITAN has DHCP enabled by default, so make sure the
development system includes a DHCP server, or connect the TITAN to a network that
has DHCP capabilities.
A number of the components are static-sensitive, so standard anti-static
precautions must be taken during use. For more information, see Anti-static
handling, page 5.
© 2007 Eurotech Ltd Issue A 9
TITAN Windows CE Quickstart Manual Unpacking and connecting up
Using the CRT-FPIF & VGA monitor
1Remove the TITAN CPU board and all other cables from the development kit box
and place them on a static-free work surface. If the board shows any signs of
damage during transit, please contact Eurotech before proceeding.
2Enable the battery by fitting the jumper labeled JP1.
3Plug the Ethernet breakout board cable into the socket labeled J11, and the
Ethernet status LED cable into the socket labeled J12.
Plug an Ethernet cable into the Ethernet breakout board, and the other end into
your development system or network. (A crossover cable is supplied in the kit to
enable direct connection between the TITAN and your host development PC.)
4Connect a monitor to the ZEUS-FPFI-CRT board.
5Connect the ZEUS FPIF-CRT board to the J4 connector.
6Fit the TITAN power supply cable to the power input J15.
7Plug in the power supply. The Windows CE desktop appears after about 15
seconds.
The following diagram shows the recommended connections for use with a VGA
monitor:
© 2007 Eurotech Ltd Issue A 10
Altri manuali per Titan
3
Indice
Altri manuali Eurotech Accessori per computer
