Eurotech DynaGATE 10-06 Manuale utente

User manual

DynaGATE 10-06

Automotive Multi-service IoT Edge Gateway - LTE Cat 1

and IP67

Rev. 0-8 — 16 September 2020 — DYGATE-10-06_Man_ENG_0-8 — ENGLISH

Trademarks

All trademarks, registered trademarks, logos, trade names, products names contained in this document

are the property of their respective owners.

Intended audience of this document

This document is intended for system integrators: skilled persons with a thorough knowledge in linking

together, physically or functionally, different computing systems and software applications to operate as a

coordinated whole in compliance with the applicable regulations.

Revision history

Revision Description Date

0-8 Updated FCC and IC information 16 September 2020

DynaGATE 10-06 User manual Rev. 0-8 Contents

CONTENTS

Trademarks 2

Intended audience of this document 2

Revision history 2

Contents 3

1 Safety instructions 7

1.1 Warning messages 7

1.1.1 Warning messages for harm to persons 7

1.1.2 Warning messages for damage to property 8

1.2 Warning: power supply safety 8

1.3 Caution: wireless safety 8

1.4 Caution: product's surfaces may become hot 8

2 Consignes de securite 9

2.1 Messages d’avertissement 9

2.1.1 Messages d’avertissement relatifs au dommage aux personnes 9

2.1.2 Messages d’avertissement relatifs aux dommages matériels 10

2.2 Avertissement: sécurité de l’alimentation électrique 10

2.3 Attention: sécurité sur la connectivité sans fil 10

2.4 Attention: les surfaces du produit peuvent devenir chaudes 11

3 How to receive technical assistance 13

3.1 How to ask for technical support 13

3.2 How to send a product for repair 13

4 Comment obtenir une assistance technique 15

4.1 Comment contacter le support technique 15

4.2 Comment retourner un produit en service après vente 15

5 Conventions used 17

5.1 Conventions for signal names 17

5.2 Conventions for signal types 17

6 Product overview 19

6.1 Product description 19

6.2 Intended use and not allowed uses of the product 20

6.2.1 Intended use 20

6.2.2 Not allowed uses 20

6.3 Technical specifications 21

6.4 Product labels 23

7 Regulatory information 25

7.1 CE marking 25

7.1.1 Safety 25

7.1.2 Packaging and packaging waste 25

7.1.3 Product disposal and recycling 25

7.1.4 WEEE compliance 25

7.1.5 RoHS 3 compliance 26

7.1.6 Directive RED 2014/53/EU 26

7.2 FCC/ISEDRegulatory Notices 28

7.2.1 FCC marking 28

7.2.2 FCC Class B Digital Device Notice 28

7.2.3 FCC restrictions on 5 GHz Wi-Fi usage 29

7.2.4 ISED Canada Regulatory Notices 29

3 / 72

Contents DynaGATE 10-06 User manual Rev. 0-8

7.2.5 ISED Class B Digital Device Notice 30

7.2.6 Canadian Representative contact information 30

7.2.7 RF Radiation Exposure Statement 30

7.2.8 Labeling Information 31

7.3 Antennas List 31

7.4 REACH compliance 32

8 Interfaces overview 33

8.1 Front Side Interfaces overview 33

8.2 LED Indicators overview 34

8.3 Service Panel and Service Interfaces 35

8.3.1 Service Panel Overview 35

8.3.2 Service Interfaces Overview 36

8 Rear Side Overview 39

8.3.1 Connectors ETH1 and ETH2 40

8.3.2 Connector M1 41

8.3.3 Connectors A1, A4, A5 42

8.3.4 Connectors A2 and A3 42

9 Features in detail 43

9.1 Wi-Fi and Bluetooth (only for versions: -33 to -37) 43

9.1.1 Wi-Fi specifications 43

9.1.2 Bluetooth specifications 44

9.1.3 BLE specifications 44

9.2 Internal mobile connectivity (only for versions: -34 to -37) 45

9.2.1 Internal modem specifications (according to product versions) 45

9.2.2 1st and 2nd MicroSIM Card holders 48

9.3 Internal GNSS (only for versions: -32 to -37) 49

9.3.1 Internal GNSS specifications 49

9.4 Digital I/Os 50

9.4.1 Insulated Digital Inputs 50

9.4.2 Insulated Digital Outputs 51

9.5 COM ports 52

9.5.1 COM specifications 52

9.5.2 Note for termination and fail safe resistors (RS-485 COM port only) 52

9.6 CAN ports 53

9.6.1 CAN specifications 53

9.6.2 Note for termination and fail safe resistors 53

9.7 Ethernet ports 54

9.7.1 Ethernet specifications 54

9.8 MicroSD card holder 55

9.9 Hardware Reset Pushbutton 55

9.10 Programmable Pushbutton 55

10 Eurotech Everyware IoT 57

10.1 Everyware Software Framework (ESF) 57

10.2 The ESF Web UI 58

10.3 The ESF Wires application 59

10.4 Everyware Cloud (EC) 60

10.5 For more information 60

11 Mechanical specifications 61

11.1 Product mechanical dimensions 61

12 How to install the product 63

12.1 Comply with safety instructions, norms and certifications 63

4 / 72

DynaGATE 10-06 User manual Rev. 0-8 Contents

12.2 How to install the product 63

13 How to manage the product power supply 65

13.1 Power supply specifications 65

13.2 How to supply power and turn ON the product 66

13.3 How to turn OFF the product 67

13.4 How to reduce the power consumption of the product 67

13.5 How to trigger a hardware reset of the product 67

14 How to maintain the product 69

14.1 How to safely remove the power supply 69

14.2 How to verify the installation of the product 69

14.3 How to clean the product 69

Notes 71

5 / 72

(This page has been intentionally left blank)

DynaGATE 10-06 User manual Rev. 0-8 1 Safety instructions

1 SAFETY INSTRUCTIONS

IMPORTANT: Read carefully and understand the instructions and warnings contained in this

document before installing / using the product. Keep this document for future reference.

To lower the risk of personal injury, electric shock, fire or damage to equipment, observe the instructions

and warnings contained in this document.

Failure to comply with the instructions and warnings contained in this document, violates the standards of

safety, design, manufacture, and intended use of the product.

Eurotech assume no liability for any damage caused by failure to observe the instructions and warnings

contained in this document.

Whenever you have any doubt regarding the correct understanding of this document, contact the Eurotech

Technical Support (for more information see "How to receive technical assistance" on page13).

1.1 Warning messages

1.1.1 Warning messages for harm to persons

To indicate an imminently hazardous situation which, if not avoided, will result in death or serious injury,

the following message is used:

DANGER

Sign

(if necessary)

TEXT THAT EXPLAINS THE HAZARD AND THE CONSEQUENCES OF NOT

AVOIDING IT.

Text that explains how to avoid this hazard.

To indicate a potentially hazardous situation which, if not avoided, could result in death or serious injury,

the following message is used:

WARNING

Sign

(if necessary)

TEXT THAT EXPLAINS THE HAZARD AND THE CONSEQUENCES OF NOT

AVOIDING IT.

Text that explains how to avoid this hazard.

To indicate a potentially hazardous situation which, if not avoided, could result in minor or moderate injury,

the following message is used:

CAUTION

Sign

(if necessary)

TEXT THAT EXPLAINS THE HAZARD AND THE CONSEQUENCES OF NOT

AVOIDING IT.

Text that explains how to avoid this hazard.

7 / 72

1 Safety instructions DynaGATE 10-06 User manual Rev. 0-8

1.1.2 Warning messages for damage to property

To indicate potential risks of damage to the supported product (or to other property), the following message

is used:

NOTICE

Sign

(if necessary)

Text that explains how to avoid damaging the supported product (or other

property)

1.2 Warning: power supply safety

WARNING

ELECTRIC SHOCK HAZARD

Failure to supply power correctly or to follow all operating instructions correctly, may create an

electric shock hazard, which could result in personal injury or loss of life, and / or damage the

equipment or other property.

To avoid injuries and safely supply power to the product, complete the following steps:

1. Observe all the instructions for safety, installation, and operation

2. Make sure your hands are dry

3. Make sure that all the cables to use:

a. Are in good condition

b. Meet the product requirements and comply with the relevant standards and

regulations

4. Position cables with care. Do not position cables in places where they may be trampled

or compressed

5. Make sure that the power-points and plugs are in good condition before using them

6. Do not overload the power-points and plugs

7. Make sure that the product maintains a proper grounding connection

8. Use a power supply that meets the product requirements and complies with the relevant

standards and regulations. In case of uncertainties, contact the Eurotech Technical

Support Team (for more information see "How to receive technical assistance" on

page13)

9. Connect power after the installation of the system has been completed

10. Never connect or disconnect the cables with the system or the external apparatus

switched ON.

1.3 Caution: wireless safety

CAUTION

The antennas used with the product must be installed with care, avoiding any interference with

other electronic devices and keeping a distance from persons greater than 20 cm. If these

requirements cannot be satisfied, the system integrator has to assess the final product with

respect to SAR regulations.

1.4 Caution: product's surfaces may become hot

Depending on the operating environment temperature, product's surfaces may become hot, creating a burn

hazard. Always allow the product's surfaces to cool before touching them.

8 / 72

DynaGATE 10-06 User manual Rev. 0-8 2 Consignes de securite

2 CONSIGNES DE SECURITE

IMPORTANT: Lire attentivement et bien respecter les instructions et les avertissements contenus

dans ce document avant d'installer / d'utiliser le produit. Conserver ce document pour s'y référer

à l'avenir.

Pour éviter les risques de blessures, de choc électrique, d'incendie ou de détérioration du matériel, bien

suivre les instructions et les avertissements contenus dans ce document.

Le non-respect des instructions et des avertissements contenus dans ce document constitue une violation

des normes de sécurité, de conception, de fabrication et d'utilisation prévue du produit.

Eurotech rejette toute responsabilité pour les dommages causés en cas de non-respect des instructions et

des avertissements contenus dans ce document.

En cas de doute sur la compréhension de ce document, contacter le Support Technique d’ Eurotech (pour

plus d’informations voir "Comment obtenir une assistance technique" page 15).

2.1 Messages d’avertissement

2.1.1 Messages d’avertissement relatifs au dommage aux personnes

Pour signaler une situation dangereuse imminente qui, si elle n’est pas évitée, entraînera la mort ou un

préjudice grave le message suivant est utilisé:

DANGER

Signal

(si besoin)

TEXTE EXPLIQUANT LE DANGER ET SES CONSÉQUENCES.

Texte expliquant comment éviter ce danger.

Pour signaler une situation potentiellement dangereuse qui, si elle n’est pas évitée, pourrait entraîner la

mort ou un préjudice grave le message suivant est utilisé:

AVERTISSEMENT

Signal

(si besoin)

TEXTE EXPLIQUANT LE DANGER ET SES CONSÉQUENCES.

Texte expliquant comment éviter ce danger.

Pour signaler une situation potentiellement dangereuse qui, si elle n’est pas évitée, pourrait entraîner un

préjudice mineur ou modéré le message suivant est utilisé:

ATTENTION

Signal

(si besoin)

TEXTE EXPLIQUANT LE DANGER ET SES CONSÉQUENCES.

Texte expliquant comment éviter ce danger.

9 / 72

2 Consignes de securite DynaGATE 10-06 User manual Rev. 0-8

2.1.2 Messages d’avertissement relatifs aux dommages matériels

Pour signaler les risques potentiels de détérioration du produit (ou des produits annexes), le message

suivant est utilisé:

AVIS

Signal

(si besoin)

Texte expliquant comment éviter d'endommager le produit (ou des produits

annexes)

2.2 Avertissement: sécurité de l’alimentation électrique

AVERTISSEMENT

RISQUE DE CHOC ÉLECTRIQUE

Une alimentation électrique incorrecte peut créer un risque de choc électrique, pouvant

entraîner des blessures corporelles ou la perte de vies humaines, et / ou endommager le

produit ou d'autres biens.

Pour éviter les blessures et brancher l'appareil en toute sécurité, procéder comme suit:

1. Respecter toutes les consignes de sécurité, d'installation et d'utilisation

2. S'assurer que les mains sont sèches

3. S'assurer que tous les câbles utilisés:

a. Sont en bon état

b. Répondent aux exigences du produit et soient conformes aux normes et

réglementations en vigueur

4. Positionner les câbles avec soin. Ne pas les placer dans des endroits où ils risquent

d'être piétinés ou comprimés

5. S’assurer que les prises de courant et les connecteurs d’alimentation sont en bon état

avant de les utiliser

6. Ne pas surcharger les prises de courant et les connecteurs d’alimentation

7. S'assurer que le produit est correctement relié à la terre

8. Utiliser une alimentation électrique conforme aux exigences du produit et conforme aux

normes et réglementations en vigueur. En cas d'incertitude, contacter l'équipe

d'assistance technique d'Eurotech (pour plus d'informations, voir "Comment obtenir une

assistance technique" page 15)

9. Ne Brancher l'alimentation électrique qu’une fois l'installation du système terminée

10. Ne jamais brancher ou débrancher les câbles lorsque le système ou un appareil

périphérique sous tension.

2.3 Attention: sécurité sur la connectivité sans fil

ATTENTION

Les antennes utilisées avec le produit doivent être installées avec soin, en évitant toute

interférence avec d'autres appareils électroniques et à au moins 20 cm des personnes. Si ces

exigences ne peuvent être satisfaites, l'intégrateur du système doit évaluer le produit final par

rapport à la réglementation SAR.

10 / 72

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Eurotech Portale

Eurotech

Eurotech Winner Series Manuale utente

Eurotech

Eurotech BRI ISDN Manuale utente

Eurotech

Eurotech ReliaGATE 10-10-00 Manuale utente

Eurotech

Eurotech ReliaGATE 10-20 Manuale utente

Eurotech

Eurotech DynaGATE 20-30 Series Manuale utente

Eurotech

Eurotech ReliaGATE 10-05-34 Scheda informativa del prodotto

Eurotech

Eurotech VOIP ALL SERIES Manuale utente

Eurotech

Eurotech VoIP2 AII Series Manuale utente

Eurotech

Eurotech Winner Series Manuale utente

Eurotech

Eurotech ReliaGATE 10-12-6 Series Manuale utente

Eurotech

Eurotech ReliaGATE 10-14 Series Manuale utente

Eurotech

Eurotech DynaGate 10-12 Series Manuale utente

Eurotech

Eurotech BoltGATE 20-25 Manuale utente

Eurotech

Eurotech VoIP2 ALL Series Manuale utente

Eurotech

Eurotech BoltGATE 20-31 Manuale utente

Eurotech

Eurotech Winner Series Manuale utente

Eurotech

Eurotech VoIP2 AII Series Manuale utente

Eurotech

Eurotech ReliaGATE 10-20 Manuale utente

Manuali Portale popolari di altre marche

LST

LST M500RFE-AS Manuale utente

Kinnex

Kinnex Media Gateway Manuale utente

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuale utente

Telsey

Telsey CPVA 500 - SIP Manuale utente

RTA

RTA 460A-NNA4 Scheda tecnica

Shaw

Shaw Gateway HDPVR Manuale utente

ABB

ABB VSN900 Guida rapida

Commander

Commander Pulse Manuale utente

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuale utente

NETGEAR

NETGEAR C6300BD Manuale utente

Amit

Amit CDW531AM Manuale utente

HMS

HMS Netbiter EasyConnect EC150 Manuale utente

Huawei

Huawei EchoLife HG620 Manuale utente

AT&T

AT&T U-verse 3801 Manuale per l'uso e la cura

Logic IO

Logic IO RTCU MX2 turbo Manuale utente

Suttle

Suttle MediaMAX MXM-521 Manuale utente