Eurotrac W11 Manuale utente

Operation Manual

W11/W12/W13/T13 Series

Wheel Loader

0BFOREWORD

W11,W12,W13,T13 Series loader is one of FIRST AVENUE self-developed new less

than 2ton multi-function mini-loaders, this loader is a ideal product for material loading and

unloading, short-distance transport, can be matched with many accessories, can be realized

more kinds of uses, such as lifting, pulling, clamp hold, digging drill, ground, weeding, feed-

ing fodder, etc. It can widely used in farm, ranch, infrastructure, road construction, stations,

boatyard and other work places, this machine has the characteristics of the best economy,

safety, and driving comfort. And these good characteristics depend on you, loaders and oth-

er operators to maintain, fully play during operating.

This manual covers all important knowledge of the starting use of the new loader, driving

and operation, care and maintenance for W11,W12,W13,T13series wheel loaders. Please

follow the instructions of the loaders, regular inspect and maintenance the working content

specified on the table, and use the provisions of the working media.

This manual can be used for W11,W12,W13,T13 model.

For some special technical skills and knowledge about maintenance and repair, be-

cause of needing to use special accessories, be not mentioned in this statement, please

contact the FIRST AVENUE dealer.

Loader maintenance andrepairworkisonlyallowed tobe done byqualified

professionals who are authorized by FIRST AVENUE.

In order to make your loader to obtain a valid warranty services, the maintenance must

be must be done on time by qualified professionals who is authorized by FIRST AVENUE.

CONTENT

SECTION 1: RECORD OF REVISIONS............................................................................

SECTION 2: GENERAL WARRANTY CONDITIONS..................................................

SECTION 3: GENERAL WARNING...............................................................................

SECTION 4: INFORMATION AND OPERATION…………………………………………….

A. MAIN CONFIGURATION.............................................................................

B. OPERATOR‘S RESPONSIBILITY..............................................................................

C. MACHINERY RESPONSIBILITY..............................................................................

CHAPTER 1.......................................................................................................................

GENERAL INFORMATION & OPERATING INSTRUCTIONS..........................................

SECTION 1: MAIN COMPONENTS..............................................................................

A. ENGINE AND PUMP.....................................................................................................

B. CYCLOID MOTOR AND DRIVE AXLE..........................................................................

C. BRAKE SYSTEM...........................................................................................................

D. WHEEL AND TYRE.......................................................................................................

E. OIL TANK.......................................................................................................................

F. ELECTRIC SYSTEM......................................................................................................

G. QUICK REMOVAL DEVICE..........................................................................................

H.SEAT.......................................................................................................................

I. ATTACHMENT................................................................................................................

J. MULTI-FUCTION CONTROL HANDLE........................................................................

K. PARKING BRAKE.........................................................................................................

L. ATTACHMENT...............................................................................................................

M. DISPLAY PANEL...........................................................................................................

SECTION 2: OPERATING PROCEDURE........................................................................

SECTION 3: SPECIFICATIONS AND PERFORMANCES........................................

SECTION 4: TRANSPORT PROCEDURE...............................................................

SECTION 5: TRAILER PROCEDURE...............................................................................

SECTION 6: STORAGE PROCEDURE.....................................................................

CHAPTER 2.......................................................................................................................

MAINTENANCE PARTS....................................................................................................

SECTION1: SERVICE................................................................................................

A. Preparation for Use........................................................................................

B. REGULAR MAINTENANCE TABLE..............................................................................

C. OIL&LUBRICATING OIL................................................................................................

SECTION2: CORRECTIVE MAINTENANCE..............................................................

A. ENEGY OF MOTION REDUCTION..............................................................................

B. DRIVE AXLE...........................................................................................................

C. BRAKE SYSTEM...................................................................................................

D. GENERATOR...............................................................................................................

ANNEX 1:HYDRAULIC DIAGRAM....................................................................................

ANNEX 2:ELECTRIC DIAGRAM........................................................................................

ANNEX 3:FRAME LABLE DIAGRAM.................................................................................

ANNEX 4:DAILY EQUIPMENT INSPECTION.................................................................

SECTION1:RECORD OF REVISIONS

Continuing improvement and advancement of product design may cause changes to the

model group which may not be included in this publication.

Each publication is reviewed and revised, as required, to update and include the

changes in later additions.

We reserves the right to modify or make changes within a specific model group without

notice and without incurring any liability to retrofit tractors previously shipped from the factory.

Contact your First Avenue Industry dealer for maintenance that is not covered in this

publication.

ISSUE DATE

UPDATE MUMBER

DISASSEMBLY

INSERTED

DESCRIPTION OF CHANGE

SECTION2:GENERAL WARRANTY CONDITIONS

This document presents the warranty conditions offered to any customer for all the

pieces of equipments manufactured in the First Avenue Industry facilities and sold to him

through the authorized Sales and Service network.

The general warranty conditions hereunder described do govern the relationship

between final customer of a First Avenue Industry product, hereunder called ―the buyer‖ and

First Avenue Industry factory, called ―the manufacturer―.

The fact that the buyer places an order of a First Avenue Industry product means that

he has read the present policy and does accept its provision. Any other general or particular

provision, that differs from or contradicts one of the general or particular conditions described

hereafter which may appear in any document from the buyer and especially in its general

purchasing conditions, cannot be used against the manufacturer unless accepted by First

Avenue Industry in a written agreement.

ARTICLE 1:

First Avenue Industry warrants that each new item of equipment is of good workmanship

and is free from mechanical defects provided that:

1) The product is installed and operated in accordance with printed First Avenue Industry

Equipment‘s instructions.

2) The product is used under normal operating conditions, for which it is designed,

3) The product is not subject to misuse, negligence or accident,

4) The product receives proper care, lubrication, protection and maintenance under the

supervision of trained personnel,

5) The product is normally protected from exterior aggressions whatever their origin.

ARTICLE 2:

This warranty expires, unless otherwise agreed by First Avenue Industry in a special

provision, 15 months after shipment by the manufacturer, or 12 months after being placed in

service, or after 1000 operating hours.

ARTICLE 3:

The First Avenue Industry Warranty is strictly limited to the replacement of defective

parts and if the repair does justify it, to the assistance of a technician. Parts shipping

expenses, traveling and housing expenses of personnel are to be paid by customer.

ARTICLE 4:

The First Avenue Industry Warranty does not apply to fluids, oils, fuses, bulbs,

accumulators, paint, seals, tires, bumpers, pads and other consumables or normally wearing

type items unless found to be defective prior to use.

ARTICLE 5:

All warranty claims from the Buyer must be sent by written to Seller who will be in

charge of dealing with the Manufacturer to address the problem in a timely manner.

ARTICLE 6:

All the expenses related to a warranty claim will be invoiced to the buyer until First

Avenue Industry employees have evaluated the claim. Whatever the circumstances, the

buyer should not refuse or delay the payment. If the evaluation concludes to First Avenue

Industry ‘ s full responsibility, a credit memo will be issued in favor of the buyer.

Under no circumstance other than those accepted by First Avenue Industry , the buyer

of the defective parts at the manufacturer address can accept without a formal letter from the

buyer and without the effective return no warranty claim.

ARTICLE 7:

This warranty is extended by First Avenue Industry only to the buyer of new products

from First Avenue Industry or of its authorized distributors. The products purchased under

this warranty are intended for use exclusively by the buyer and his employees and by no

other person. Therefore, there shall be no third party beneficiary of this warranty.

ARTICLE 8:

This warranty does only apply to the primeval reason. In other words, the

consequences on the product linked to its use after first problem are not covered by this

warranty.

ARTICLE 9:

Under no circumstances whatever shall First Avenue Industry and the seller be liable

for any special or consequential damages, whether based on lost goodwill, lost resale profits,

work stoppage, impairment of other goods or otherwise, and whether arising out of breach of

any express or implied warranty, breach of contract, negligence or otherwise, except only in

the case of personal injury as may be required by applicable law

ARTICLE 10:

The warranty is automatically void in the following cases:

1) The product has received some modification, not advised by First Avenue Industry

or not done following First Avenue Industry requirements

2) Some original parts have been replaced by parts not provided by First Avenue

Industry .

ARTICLE 11:

This warranty and all undertaking of First Avenue Industry shall be governed by the

laws of manufacturer‘s country and discussed in front of nearest court from the

manufacturer‘s facility even in case of multiple of defenders.

SECTION3 GENERAL WARNING

FOREWORD

This instruction manual is intended for all users of the machine: the company manager, the

Department Head, the driver, as well as the whole personnel who works with or near to the equipment

GENERAL WARNING:

1.Before using the machine, go through this manual and comply with all its instructions

2. Also carefully read the instructions that appear on the plates fixed onto the machine and keep

them readable

3. Keep this instruction manual at the disposal of all operators

4. Make sure that any person to whom you entrust the machine is qualified to fulfill the safety

requirements linked to its use

5. Avoid unsupervised interventions on your equipment when not being used

6. Never use a machine which does not looks to be in good condition

7. Never apply a load or a stress exceeding the maximum operating load of the machine

8. Never use the machine for an operation it is not designed to perform

9. Become thoroughly familiar with the safety regulations applicable to the machine and enforce

them scrupulously

10.The manufacturer declines his responsibility for the consequences of a disassembly of the

machine or any modification made without his supervision

OBLIGATION TO GO THROUGH THE USER’S MANUAL

The company manager is compelled to make the operators fully acquainted with the

regulations of the instruction manual.

Read this entire chapter BEFORE attempting to operate this loader

The company manager is responsible for the enforcement of the applicable ―user‘s

regulation‖

The user must imperatively read and assimilate this instruction manual in order to

be able to comply with it during start- up and use

The instruction manual must be kept during the life- span the machine, including in

the event of a resale, of a change of user or manager

The instruction manual is not a training manual but it specifies, when required, if a

training is necessary.

GENERAL INSTRUCTION

The company manager must make sure that the machine is delivered with the

instruction manual and the certificate of conformity for the member states of the

European Community

* The location of the instruction manual is specified on the dispatch note when

leaving the factory

The certificate of conformity is placed with the dispatch note

Only trained and qualified operators with appropriate driving license and accredited

by the company manager may operate the vehicle within the scope of the use for which it

has been designed

The loader may only be used in accordance with the conditions established by the

manufacturer in this instruction manual and declines the manufacturer his responsibly.

Any use that does not comply with the regulations of this instruction manual might cause

risks of injury to people, property and the environment

The manufacturer‘s responsibility is limited to the assembly configuration of the

equipment as described in the certificate of conformity. Before each use, the driver

should check that the machine is in good condition

The certificate of conformity is placed with the dispatch note

MACHINE NORMAL USING DOMAIN

810/820,850,850T LOADER –THE ALLOWED MAXIMAL LOAD AND THE

GENERAL USING CONDITIONS ARE INCLUED IN THIS DOCUMENTATION

PROHIBIT THE USE OF LOADERS TO LOAD ANYTHING OTHER THAN THE SCOPE

THE ADAPT TEMPERATURE RANGE OF THIS LOADER IS - 30℃-45℃

MAKE IN THESE CIRCONSTANCES CAN‘T BE HELD TO RESPONSIBLILITY OF FIRST

AVENUE INDUSTRY .

MODIFICATION OF THE LOADER

The manufacturer is not responsible in case of any modification, addition or combination with

equipment from another origin.

The manufacturer declines any responsibility for consequences resulting from changes in the

characteristics or modifications made without his written consent, and concerning either the mechanical,

electrical, hydraulic part or the mechanically welded structure.

If the client wants a modification to be made, he must imperatively consult the manufacturer.

For your safety and in order to benefit from the total guarantee of the manufacturer, you must only

use guaranteed genuine spare parts.

Altri manuali per W11

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Eurotrac Caricatore compatto

Eurotrac

Eurotrac W11 Manuale utente

Eurotrac

Eurotrac W10 Manuale utente

Eurotrac

Eurotrac W11 Manuale utente

Eurotrac

Eurotrac W11E Manuale utente

Manuali Caricatore compatto popolari di altre marche

Toyota

Toyota FORKLIFT 5FGIO Series Manuale utente

Toro

Toro TX 427 Manuale dell'operatore

Kubota

Kubota B2601 Manuale utente

Allis-Chalmers

Allis-Chalmers TL-16 Manuale utente

Noblelift

Noblelift ECL15B Series Manuale

Ballymore

Ballymore PLD PLUS Manuale

Toro

Toro 22911 Manuale utente

Toro

Toro 22473 Manuale utente

Tigercat

Tigercat 230C Manuale utente

jcb

jcb 1CX Manuale utente

RAMROD

RAMROD PRO 1330 Manuale utente

Case

Case 521F Manuale utente

RAMROD

RAMROD 950 Manuale utente

Terex

Terex Genie GTH-4017 EX Manuale utente

Toro

Toro TX 420 Manuale utente

Barreto

Barreto 825TKL Manuale utente

Komatsu

Komatsu GALEO WA450-5L Guida all'installazione

Komatsu

Komatsu WA480-8 Manuale