Eusso UPE5602-RT Manuale utente
2-port Power over Ethernet Repeater
UPE5602-RT
Quick Installation Guide
Copyright EUSSO Technologies, Inc. All rights reserved
Step 1: Connection to Power over Ethernet Switch
A. Connect one of the Ethernet Switch port with PoE power supply to the PoE IN port of UPE5602-RT as the
following connection.
B. The LED indicators “POWER” and “IN” will turn on indicating the PoE and Ethernet connection.
C. The LED indicators “IN” will flash to indicate Ethernet data activity.
Step 2: Connection to PoE PD
D. Connect the PoE OUT1 & OUT2 port of UPE5602-RT to power up the PD device as the following connection.
E. The LED indicators “OUT1” will turn on indicating the PoE and Ethernet connection.
F. The LED indicators “OUT1” will flash to indicate Ethernet data activity.
G. The LED indicators “OUT2” will turn on indicating the PoE and Ethernet connection.
H. The LED indicators “OUT2” will flash to indicate Ethernet data activity.
** Note: If the Ethernet cable is not standard CAT5 cable, the UPE5600-RT may be working for shorter length than 100 meter.
Indice
Altri manuali Eusso Ripetitore
