Eusso UNC7702 Manuale utente
Indoor Dual-Streaming
CCD Network Camera
UNC7702-Series User’s Manual
Version: 1.0
Date: 05/030/2008
Copyright EUSSO Technologies, Inc. All rights reserved
CONTENTS
CHAPTER 1 INTRODUCTION.....................................................................................................................................2
1. WHAT IS DUAL STREAMING NETWORK CAMERA/VIDEO SERVER?...................................................................2
2. FEATURES.........................................................................................................................................................3
CHAPTER 2 PHYSICAL IMAGES...............................................................................................................................4
UNC7702 NETWORK CAMERA.......................................................................................................................................4
CHAPTER 3 INSTALLATION.......................................................................................................................................5
1. HARDWARE CONNECTION.................................................................................................................................5
2. SOFTWARE INSTALLATION ................................................................................................................................6
3. NETWORK CONFIGURATION .............................................................................................................................7
CHAPTER 4 USING THE WEB UI ............................................................................................................................. 11
1. LIVE VIEW......................................................................................................................................................12
2. PLAYBACK......................................................................................................................................................15
3. CONFIGURATION PAGE....................................................................................................................................21
CHAPTER 5 CONFIGURE THE SETTINGS WITH WEB UI.................................................................................22
1. SUB ITEMS ......................................................................................................................................................22
2. VIDEO SETUP (AVAILABLE FOR ADMINISTRATOR ONLY).................................................................................23
3. CAMERA SETUP ..............................................................................................................................................25
4. EVENT SETUP .................................................................................................................................................28
5. SYSTEM SETUP ...............................................................................................................................................34
6. NETWORK SETUP............................................................................................................................................39
7. STORAGE SETUP.............................................................................................................................................43
8. LOG LIST........................................................................................................................................................45
APPENDIX A SPECIFICATIONS................................................................................................................................46
APPENDIX B THE MINI-DIN CONNECTOR...........................................................................................................47
APPENDIX C FAQ.........................................................................................................................................................49
1. HOW CAN ISET FACTORY DEFAULT? ...............................................................................................................49
2. HOW TO UPGRADE FIRMWARE FOR THE DEVICE?.............................................................................................50
3. WHYACTIVEXREMAINS IN OLD VERSION AFTER UPGRADING TO NEW VERSION FIRMWARE? .........................52
2
Chapter 1
Introduction
1. What is Dual Streaming Network Camera/Video Server?
The UNC7702 (Network Camera, hereinafter called UNC7702) is professional MPEG-4/MJPEG dual
streaming surveillance products. Dual streaming allows seamless remote video monitoring using
MPEG-4 concurrently with transmission of high quality JPEG images to an optional storage. The audio
stream can also be compressed and distributed over Intranet/Internet as the result of capable being
recorded. UNC7702 has 2 USB 2.0 host ports; with external storage connected the video/audio can be
recorded locally. For power solution, while normal adapter is applied for both devices the UNC7702 also
comes with an optional PoE model. The UNC7702 successfully provides the solution of remote
monitoring and quality recording in surveillance.
3
2. Features
Self-Contained Web Server providing Internet capability for remote access
MPEG-4/MJPEG dual compression formats
Simultaneous MPEG-4 and MJPEG stream for multiple clients
Supports up to 30/25 FPS at Full D1 resolution
More than 540 TV lines resolution
Built-in internal microphone
Event handling trigger by alarm/motion and action to send video clip by Email / FTP
Two USB 2.0 Host ports support external storage connection for local recording
Wireless USB dongle (IEEE 802.11b/g) compliant (to be upgraded)
IP setup by easy IP Installer / DHCP / Static IP
Supports DDNS for dynamic IP application
NTP (network time server) with DST supported which provide accurate unify system time
Hardware watchdog providing robustness system in critical environment
Chapter 2
Physical Images
UNC7702 Network Camera
4
Chapter 3
Installation
1. Hardware connection
1. Prepare a PC with Ethernet link to the network
2. Connect UNC7702 device to the network hub/switch with standard pass through (CAT5) cable,
or connect directly to PC with a cross over cable.
3. Connect power jack
4. Ensure the power adapter specification matches the power system (110V or 220V). Connect
the adapter to the outlet.
5. Check both LEDs (Power/Network); ensure they are light on after the steps above.
Follow the above steps to perform the UNC7702 connections.
Physical connection of UNC7702 Camera
5
5
6
2. Software Installation
The following software is necessary for the proper display and use of the UNC7702 from the Web site.
The software will be taken from the Software Package CD.
IP Installer
The IP Installer is used to locate and configure network cameras and video servers on the LAN. This
utility is useful for conveniently configuring the network settings of the device, or for finding a device
once the network settings have been modified.
To install the IP Installer, from the Software Package CD UI, select IP installer, then follow the on screen
instructions.
Component Installer
The ActiveX component is used by our devices for video display and device configuration. Usually, when
you connect to the UNC7702 via IE browser, the ActiveX component will be installed automatically. If the
components can not be installed, install this software from the Software Package CD.
XVID Codec
An MPEG-4 codec is applied for displaying the video stream and playing the recoded AVI files. If the
video stream can’t be displayed or the recordedAVI files can be play on PC, install this software from the
Software Package CD.
VLC
Though not necessary, this can be used for viewing the streaming without a Web browser.
7
t provides an easier, more efficient way to configure the IP address and network
ettings of the devices. It even provides a convenient way to set the network settings for multiple devices
aneously using the batch setting function. Moreover, IP Installer can save the network settings for
reparation before IP Assignment
3. Network Configuration
IP Installer is a utility tha
s
simult
all devices as a backup and restore them when necessary.
P
. Always consult your network administrator before assigning an IP address to your server in order to
avoid using a previously assigned IP address.
2. Ensure the UNC7702 is powered on and correctly connected to the network.
3. MAC Address: Each device has a unique Ethernet address (MAC address) shown on the label of the
device as the serial number (S/N) with 12 digits (e.g. 000429-XXXXXX).
1
4. Although the IP Installer is able to find and configure any UNC7702 on the LAN except those that are
behind a router, it is a good idea to set the host PC to the same subnet. In order to connect to the
Web-based user interface of UNC7702, the host PC must be in the same subnet. For more information
about subnets, please consult your network administrator.
Using IP Installer to Assign an IP Address to UNC7702
1. Once IP Installer has been successfully installed on the PC, double click the IP Installer icon on the
desktop, or select it from Start > Programs > IP Installer > IP Installer > Launch IP Installer.
*0004290000
B1
8
work Device to search the device in the LAN.2. Click the menu bar Tool > Search Net
3. From the list, select the device with the MACAddress that corresponds to the UNC7702 that is to be
configure l to the unit’s S/N (Serial Number).
4. Double cli erty Page for e selected device or click the menu bar View >
d. The MACAddress is identica
ck the item to open the Prop th
Property.
5. After filling in the properties, click [Synchronize] button to complete the configuration settings in the
remote UNC7702 while saving configuration in the PC. If click [OK] button, the configuration is only be
saved in the PC.
Open the Web-based UI of the Selected UNC7702
1. To access the Web-based UI of the selected unit, run the View > Open Web on the menu bar.
2. If the device has been configured correctly, the default Web browser will open to the home page of the
selected device.
3. If you find your browser is opened and automatically connected to the UNC7702 Home Page, it means
you’ve assigned an IPAddress to the unit successfully. Now you can close the IP Installer and start to
use your UNC7702.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Eusso Telecamera di sicurezza
